91.120.10 建筑物绝热 标准查询与下载
共找到 1265 条与 建筑物绝热 相关的标准，共 85 页
主要技术内容包括：总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对SC钢丝网片组合保温板现浇混凝土墙体自保温系统做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。
Technical regulations for application of SC steel mesh combined insulation board cast-in-place concrete wall self-insulation system
- ICS
- 91.120.10
- CCS
- E4710
- 发布
- 2022-03-24
- 实施
- 2022-03-24
Thermal performance of metal curtain walling -- Simplified calculation method of thermal transmittance and solar heat gain coefficient
- ICS
- 91.120.10
- CCS
- 发布
- 2022-03-22
- 实施
This document specifies: — a structured list of control, building automation and technical building management functions which contribute to the energy performance of buildings; functions have been categorized and structured according to building disciplines and building automation and control (BAC); — a method to define minimum requirements or any specification regarding the control, building automation and technical building management functions contributing to energy efficiency of a building to be implemented in building of different complexities; — a factor-based method to get a first estimation of the effect of these functions on typical buildings types and use profiles; — detailed methods to assess the effect of these functions on a given building.
Energy performance of buildings - Contribution of building automation, controls and building management - Part 1: General framework and procedures (ISO 52120-1:2021, Corrected version 2022-09)
- ICS
- 91.120.10
- CCS
- 发布
- 2022-03-09
- 实施
- 2022-06-30
This document contains information to support the correct understanding, use and adoption of ISO 52120‑1.
Energy performance of buildings - Contribution of building automation, controls and building management - Part 2: Explanation and justification of ISO 52120-1 (ISO/TR 52120-2:2021)
- ICS
- 91.120.10
- CCS
- 发布
- 2022-03-09
- 实施
本规程适用于抗震设防烈度 8 度及 8 度以下地区建筑高度不超过 80m、采用可振捣钢 丝网片保温结构一体化系统的新建、扩建民用建筑及工业建筑。《规程》内容明确了可振捣钢丝网片保温结构一体化系统在 建筑工程中应用的适用范围；规定了系统构造、组成材料性能指标及 设计、施工与验收要求。
Technical specification for vibrable wire mesh composite thermal insulation structure integration systems
- ICS
- 91.120.10
- CCS
- E486
- 发布
- 2022-03-04
- 实施
- 2022-04-01
本标准适用于新建、改扩建智能建筑与智能化小区的工程设计、工程实施、检测验收。
Intelligent Building Engineering Technical Standards
- ICS
- 91.120.10
- CCS
- P32
- 发布
- 2022-01-04
- 实施
- 2022-04-01
本文件规定了近零能耗建筑用保温材料产品评价的术语和定义、一般要求、评价要求和评价方法。 本文件适用于近零能耗建筑用有机、无机和复合保温材料产品评价。
Evaluation of thermal insulation materials for near-zero energy building products
- ICS
- 91.120.10
- CCS
- E4710
- 发布
- 2022-01-01
- 实施
- 2022-03-23
Thermal performance of buildings－Determination of air change in buildings－Tracer gas dilution method
- ICS
- 91.120.10
- CCS
- 发布
- 20211231
- 实施
- 20211231
项 目 指 标 Ⅰ 型 Ⅱ 型 Ⅲ 型 pH 9.0～11.0 — — 浆体密度ρ/（kg/m3） 750±50 — — 干密度ρ/（kg/m3） 170±15 170±15 170±15 体积收缩率η/% ≤ 15 — — 导热系数/［W/（m·K）］ －10 ℃±5 ℃ ≤ 0.045 0.045 0.045 100 ℃±10 ℃ ≤ 0.050 0.050 0.050 350 ℃±10 ℃ ≤ 0.075 0.075 0.075 600 ℃±10 ℃ ≤ 0.10 0.10 0.10 附着力（黏结强度）/kPa ≥ 40 — — 抗拉强度/kPa ≥ — 110 110 抗折强度/kPa ≥ — — 150 柔韧性/次 ≥ — 5 — 憎水率 ≥ — 98 98 燃烧性能 A1 A1 A1
Microporous thermal insulating ceramic composite material
- ICS
- 91.120.10
- CCS
- C307
- 发布
- 2021-12-30
- 实施
- 2022-02-21
Technical specification for the application of high-performance autoclaved aerated concrete slabs for prefabricated buildings
- ICS
- 91.120.10
- CCS
- P 32
- 发布
- 2021-12-23
- 实施
- 2022-04-23
主要内容包括：总则、术语、基本规定、绝热系统、设计与构造、施工、工程质量检验与验收、维护与保养等。
Technical specification for building vacuum ceramic bead insulation system
- ICS
- 91.120.10
- CCS
- E4710
- 发布
- 2021-12-20
- 实施
- 2022-01-05
Energy performance of buildings — Contribution of building automation, controls and building management — Part 2: Explanation and justification of ISO 52120-1
- ICS
- 91.120.10
- CCS
- 发布
- 2021-12-16
- 实施
This document specifies: — a structured list of control, building automation and technical building management functions which contribute to the energy performance of buildings; functions have been categorized and structured according to building disciplines and building automation and control (BAC); — a method to define minimum requirements or any specification regarding the control, building automation and technical building management functions contributing to energy efficiency of a building to be implemented in building of different complexities; — a factor-based method to get a first estimation of the effect of these functions on typical buildings types and use profiles; — detailed methods to assess the effect of these functions on a given building.
Energy performance of buildings — Contribution of building automation, controls and building management — Part 1: General framework and procedures
- ICS
- 91.120.10
- CCS
- 发布
- 2021-12-16
- 实施
本文件规定了微纤维玻璃棉工业用玻璃料的术语和定义、分类和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于微纤维玻璃棉工业用高碱玻璃料块与玻璃球(主要应用于铅酸蓄电池隔板)。
High alkali glass pellets for micro-glassfibre production
- ICS
- 91.120.10
- CCS
- B109
- 发布
- 2021-12-06
- 实施
- 2023-03-07
1.1 This Standard specifies the physical property requirements and test methods to determine the material properties for light density, open cell spray applied semi-rigid polyurethane foam, used as a thermal insulation for building applications, whether applied on a building site or in a prefabrication (manufacturing) facility. 1.2 The spray polyurethane foam system installer site manufactures the light density, open cell spray applied semi-rigid polyurethane foam material identified by this Standard. The spray polyurethane foam system supplier produces a liquid “resin” component and supplies the corresponding polymeric isocyanate which, when mixed together on a fixed ratio basis, produce the material which results in the physical properties listed in this Standard. The Standard CAN/ULC-S712.2 includes mandatory requirements for the installation of the material as well as qualification of contractors and the qualification of installers and forms an integral part of the manufacturing process for the finished material. 1.3 The test methods listed in this Standard are used to determine the values for the physical properties. These physical property values are intended for use in specifications, material evaluations and quality control. They are not intended to predict end-use material performance. 1.4 This standard applies to material where the continuous service temperature of the substrate is within the range of -60 to +70 °C. 1.5 The testing and evaluation of a material against this Standard may require the use of materials and/or equipment that could be hazardous. This Standard does not purport to address all the safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use.
STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – MATERIAL SPECIFICATION
- ICS
- 91.120.10
- CCS
- 发布
- 2021-11-30
- 实施
1.1 This Standard specifies the physical property requirements and test methods to determine the properties for mineral fibre thermal insulation for buildings, manufactured in the form of faced or unfaced batts, rolls, boards, and loose-fill intended for use in unconfined spaces with slopes not exceeding 4.5:12, whether installed on a building site or in a prefabrication (manufacturing) facility. Facings, when used, are defined in Table 1.1 for Types 2 and 3. Kraft paper facing is not covered by this Standard. 1.2 The test methods listed in this Standard are used to determine the values for the material properties. These values are intended for use in specifications, material evaluations and quality control. They are not intended to predict end-use material performance. 1.3 This Standard applies to material where the continuous service temperature is what is naturally achievable in a building envelope. The material is not intended to be used in high temperature applications nor cryogenic applications. 1.4 This Standard also includes requirements for the manufacturer to provide the Job Site Certificate for use by the applicators. 1.5 Recommended conformity control systems are provided in Annex D for preformed insulation and Annex E for loose fill insulation. 1.6 The testing and evaluation of a product against this Standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the health and safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish health and safety practices, in conjunction with any existing applicable regulatory requirements, prior to its use.
STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS, PART 1: MATERIAL SPECIFICATION
- ICS
- 91.120.10
- CCS
- 发布
- 2021-11-30
- 实施
Energy performance of buildings - Building management system - Part 1: Module M10-12 (ISO 52127-1: 2021)
- ICS
- 91.120.10
- CCS
- 发布
- 2021-11-01
- 实施
- 2021-11-01
Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
- ICS
- 91.120.10
- CCS
- 发布
- 2021-11-01
- 实施
- 2021-11-01
The project specifies application related requirements to thermal insulating products for buildings by DIN EN 13162, DIN EN 13163, DIN EN 13164, DIN EN 13165, DIN EN 13166, DIN EN 13167, DIN EN 13168, DIN EN 13169, DIN EN 13170 DIN EN 13171, DIN EN 16069 and it specifies thermal
Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials
- ICS
- 91.120.10
- CCS
- P31
- 发布
- 2021-11-00
- 实施
EN 15193-1 specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The met
Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9; German version EN 15193-1:2017+A1:2021
- ICS
- 91.120.10
- CCS
- 发布
- 2021-11-00
- 实施
