91.120.10 建筑物绝热 标准查询与下载

KS F 3702-2022 蛭石

Vermiculites

22/30461579 DC BS EN 16783 隔热产品 环境产品声明（EPD） 产品类别规则 (PCR) 是对工厂制造和现场成型产品 EN 15804 的补充

BS EN 16783. Thermal insulation products. Environmental Product Declarations (EPD). Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products

DB37/T 2368-2022 《钻芯法检测混凝土抗压强度技术规程》

本文件适用于采用钻芯法进行结构混凝土抗压强度的检测。当需检测构件较多时，采用回弹法、超声回弹综合法、后装拔出法等与钻芯法综合检测，形成钻芯修正法，用钻芯法检测结果对其它检测方法测得结果进行修正，使检测结果更可靠，可减少对结构损害。

Technical Regulations for Testing the Compressive Strength of Concrete by Core Drilling Method

DB37/T 2366-2022 《回弹法检测混凝土抗压强度技术规程》

本文件适用于采用回弹法进行结构混凝土抗压强度检测。

Technical Regulations for Testing the Compressive Strength of Concrete by Rebound Method

DB37/T 2365-2022 《后装拔出法检测混凝土抗压强度技术规程》

本文件适用于采用后装拔出法进行结构混凝土抗压强度的检测。

Technical Regulations for Testing the Compressive Strength of Concrete by Post-installation Pull-out Method

DB37/T 2363-2022 《贯入法检测砌筑砂浆抗压强度技术规程》

本文件适用于采用贯入法进行砌筑砂浆抗压强度的检测。

Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Penetration Method

DB37/T 2361-2022 《超声回弹综合法检测混凝土抗压强度技术规程》

本文件适用于采用超声回弹综合法进行正常使用状态下普通混凝土抗压强度的检测。不适用于因冻害、化学侵蚀、火灾、高温等已造成表面疏松、剥落的混凝土抗压强度的检测。

Technical Regulations for Testing the Compressive Strength of Concrete by Ultrasonic Rebound Comprehensive Method

DB37/T 2369-2022 《砂浆片局压法检测砌筑砂浆抗压强度技术规程》

本文件适用于采用砂浆片局压法进行砌筑砂浆抗压强度的检测。

Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Mortar Sheet Partial Pressure Method

DB37/T 2371-2022 《钻芯法检测砌体抗剪强度及砌筑砂浆强度技术规程》

本文件适用于厚度为240 mm的砌体抗剪强度及砌筑砂浆抗压强度的检测，砌块材料为烧结普通砖、烧结多孔砖、混凝土普通砖、混凝土多孔砖或蒸压粉煤灰砖，砌块外形尺寸为240 mm×115 mm×53 mm或240 mm×115 mm×90 mm。

Technical Regulations for Testing the Shear Strength of Masonry and the Strength of Masonry Mortar by Core Drilling Method

DB37/T 2364-2022 《后锚固法检测混凝土抗压强度技术规程》

本文件适用于采用后锚固法进行结构混凝土抗压强度的检测。

Technical Regulations for Testing the Compressive Strength of Concrete by Post-Anchoring Method

KS F 2901-2022 结构构件喷涂防火材料厚度和密度的试验方法

Test methods for thickness and density of sprayed fire resistive material applied to structural members

22/30441984 DC BS ISO 9869-3 建筑构件的隔热 热阻和热传导率的原位测量 第 3 部分：探头插入方法

BS ISO 9869-3. Thermal insulation of building elements. In-situ measurement of thermal resistance and thermal transmittance - Part 3. Probe insertion method

CAN/ULC 717.1:2022 平墙隔热混凝土模板 (ICF) 单元标准 材料特性

1.1 This Standard specifies the requirements for stay in place, modular expanded polystyrene (EPS) Insulating Concrete Form (ICF) units. Once filled with concrete, the ICF units remain in place as the thermal insulation for the resulting cast-in-place concrete wall of uniform cross-section and thickness. 1.2 The requirements of this Standard apply to ICFs that act as permanent formwork for cast-in-place reinforced concrete beams; lintels; exterior and interior, above and below grade, load-bearing and non load-bearing walls; foundations; and retaining walls. This Standard is restricted to ICFs that enclose uniform monolithic concrete walls. 1.3 This Standard provides requirements for products that consist of moulded expanded polystyrene (EPS) insulation panels that are connected by cross ties to form the ICF and for the performance of cross tie flanges as a substrate for the attachment of interior and exterior finishes. 1.4 This Standard sets performance requirements for the ICF unit in its primary function as a stay-inplace concrete form and for the materials that make up the form unit, along with the test methods to determine compliance with the performance requirements. 1.5 The fire resistance performance of the ICF unit material is not covered by this Standard. NOTE: For fire resistance performance requirements, refer to documents published by Authorities Having Jurisdiction, such as, but not limited to, Building Codes. 1.6 Structural performance design methods for ICF units are described in Annex C2. 1.7 The structural performance and the design of the concrete within the ICF are not covered in this Standard. NOTE: For requirements for structural performance and the design of the concrete within the ICF unit, refer to CSA A23.1/A23.2, Concrete materials and methods of concrete construction/Test methods and standard practices for concrete, and CAN/CSA A23.3, Design of concrete structures, or ACI 318, Building Code Requirements for Structural Concrete and Commentary. 1.8 This document does not purport to address all the health and safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish health

STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS – MATERIAL PROPERTIES

DB21/T 3630-2022 防水工程施工技术规程

Waterproof engineering construction technical regulations

22/30437135 DC BS EN 17887-1 建筑物的热性能 已竣工建筑物的现场测试 第1部分：骨料热损失测试数据收集

BS EN 17887-1. Thermal performance of buildings. In situ testing of completed buildings. - Part 1. Data collection for aggregate heat loss test

22/30437141 DC BS EN 17888-2 建筑物的热性能 建筑测试结构的现场测试 第2部分.骨料热损失测试的稳态数据分析

BS EN 17888-2. Thermal performance of buildings. In situ testing of building test structures. - Part 2. Steady-state data analysis for aggregate heat loss test

22/30437132 DC BS EN 17887-2 建筑物的热性能 已竣工建筑物的现场测试 第2部分.骨料热损失测试的稳态数据分析

BS EN 17887-2. Thermal performance of buildings. In situ testing of completed buildings. - Part 2. Steady-state data analysis for aggregate heat loss test

22/30437138 DC BS EN 17888-1 建筑物的热性能 建筑测试结构的现场测试 第1部分：骨料热损失测试数据收集

BS EN 17888-1. Thermal performance of buildings. In situ testing of building test structures. - Part 1. Data collection for aggregate heat loss test

BS ISO 52032-1:2022 建筑物的能源性能 供暖、制冷和生活热水（DHW）分配系统的能源需求和效率 计算程序

Energy performance of buildings. Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems - Calculation procedures

DB21/T 3614-2022 低冰点沥青路面设计与施工技术规程

Technical specification for design and construction of low freezing point asphalt pavement