91.120.10;91.140.01 标准查询与下载

ANSI/ASHRAE/USGBC/IES 189.1d-2012 低层住宅除外的高性能绿色建筑设计标准

This addendum clarifies the intent of this exception to relax the limitations of 150 feet and 100 feet for the case of low-impact trails.

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1e-2012 低层住宅除外的高性能绿色建筑设计标准

This addendum updates Standard 189.1-2011 references to Energy Star.

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1aa-2012 低层住宅建筑除外的高性能绿色建筑设计标准

This addendum clarifies the requirements for Visible Transmittance (VT) of Skylights and Roof Monitors apply only to those products when they are used to comply with the minimum daylighted area requirements.

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1 Addendum c-2012 低层住宅建筑除外的高性能绿色建筑设计标准

This addendum narrows the scope of the reference to 90.1 to just those sections involved with exterior lighting

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1n-2012 低层住宅建筑除外的高性能绿色建筑设计标准

This addendum modifies the proposed language to delete the requirement for a minimum initial SRI value. It also editorially restructures Section 5.3.2.4 (Solar Reflective Index) to separate roofing and non-roofing products to give clarity.

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1t-2012 低层住宅建筑除外的高性能绿色建筑设计标准

Clarifies the role of standards referenced by Standard 189.1 and addresses situations in which the requirements of two or more referenced standards, both of which are required for compliance with Standard 189.1, may have inconsistent requirements.

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1a-2012 低层住宅建筑除外的高性能绿色建筑设计标准

Updates references to the newly approved ANSI/BIFMA M7.1-2011, ANSI/BIFMA X7.1-2011 and ANSI/BIFMA e3-2011 in Sections 8-Indoor Environmental Quality (IEQ) and Section 11-Normative References. It deletes all of Normative Appendix E IAQ Limit Requirements for Office Furniture Systems and Seating, making reference to the relevant material in Section 8-Indoor Environmental Quality (IEQ).

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1 Addendum ac-2012 除低层住宅建筑外的高性能绿建筑设计标准

This addendum deletes the ENERGY STAR requirements and requires compliance with the NEMA standard in residential spaces in section 7.4.7 (Other Equipment).

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

DIN V 18599-10:2011 建筑能源效率.加热,冷却,通风,生活热水和照明对净能源,最终能源及一次能源需求的计算.第10部分:气候数据使用的边界条件

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data

DIN V 18599-11:2011 建筑能源效率.加热,冷却,通风,生活热水和照明对净能源,最终能源及一次能源需求的计算.第11部分:建筑自动化

Energetic evaluation of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 11: Building automation

DIN V 18599-1:2011 建筑能源效率.加热,冷却,通风,生活热水和照明对净能源,最终能源及一次能源需求的计算.第1部分:能源资源的一般平衡程序,术语及定义,区分带及评估

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 1: General balancing procedures, terms and definitions, zoning and evaluation of energy sour

ANSI/ASHRAE/USGBC/IES 189.1-2011 低层住宅除外的高性能绿色建筑物标准

This standard provides minimum criteria that apply to new buildings and major renovation projects (new portions of buildings and their systems): a building or group of buildings, including on-site energy conversion or electric-generating facilities, which utilize a single submittal for a construction permit or which are within the boundary of a contiguous area under single ownership and Address sustainable sites, water use efficiency, energy efficiency, the building's impact on the atmosphere, materials and resources, and indoor environmental quality (IEQ). This fourth public review shows changes made to the third public review draft in response to comments receiv

Standard for High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1 Addendum b-2011 低层住宅建筑除外的高性能绿色建筑设计标准

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1 Addendum u-2011 低层住宅建筑除外的高性能绿色建筑设计标准

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE/USGBC/IES 189.1 Addendum o-2011 低层住宅建筑除外的高性能绿色建筑设计标准

Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

BS EN ISO 12241:2009 建筑设备和工业设备的隔热 计算规则

Thermal insulation for building equipment and industrial Installations. Calculation rules

LST EN ISO 12241:2008 建筑设备和工业装置的隔热 计算规则（ISO 12241:2008）

Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008)

ISO 12241:2008 建筑设备和工业装置的绝热.计算规则

This International Standard gives rules for the calculation of heat-transfer-related properties of building equipment and industrial installations, predominantly under steady-state conditions. This International Standard also gives a simplified approach for the treatment of thermal bridges.

Thermal insulation for building equipment and industrial installations - Calculation rules

ISO 15758:2004 建筑物设备和工业装置的温湿性能.水蒸气扩散的计算.冷管绝缘系统

This standard specifies a method to calculate the density of water vapour flow rate in cold pipe insulation systems, and the total amount of water diffused into the insulation over time. This calculation method presupposes that water vapour can only migrate into the insulation system by diffusion, with no contribution from airflow. It also assumes the use of homogeneous, isotropic insulation materials so that the water vapour partial pressure is constant at all points equidistant from the axis of the pipe. The standard is applicable when the temperature of the medium in the pipe is above 0 ℃. It applies to pipes inside buildings as well as in the open air.

Hygrothermal performance of building equipment and industrial installations Calculation of water vapour diffusion Cold pipe insulation systems (Second Edition)