91.120.20 建筑物声学、隔音 标准查询与下载

UNI EN ISO 10140-3:2021 声学 建筑构件隔音的实验室测量 第3部分：冲击隔音的测量

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation

UNI EN ISO 10140-5:2021 声学 建筑构件隔声的实验室测量 第5部分：测试设施和设备的要求

Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment

UNI EN ISO 10140-2:2021 声学 建筑构件隔音的实验室测量 第2部分：空气隔音的测量

Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation

GSO ISO 12354-4:2021 建筑声学 根据元件的性能评估建筑物的声学性能 第4部分：室内声音向室外的传输

ISO 12354-4:2017 specifies a calculation model to estimate the sound power level radiated by the envelope of a building due to airborne sound inside that building, primarily by means of measured sound pressure levels inside the building and measured data which characterize the sound transmission by the relevant elements and openings in the building envelope. These sound power levels, together with those of other sound sources in or in front of the building envelope, form the basis for the calculation of the sound pressure level at a chosen distance from a building as a measure for the acoustic performance of buildings. The prediction of the inside sound pressure level from knowledge of the indoor sound sources is outside the scope of this document. The prediction of the outdoor sound propagation is outside the scope of this document. NOTE For simple propagation conditions an approach is given for the estimation of the sound pressure level in Annex E. ISO 12354-4:2017 describes the principles of the calculation model, lists the relevant quantities and defines its applications and restrictions.

Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside

GSO ISO 12354-3:2021 建筑声学 根据元件的性能评估建筑物的声学性能 第3部分：针对室外声音的空气隔声

ISO 12354-3:2017 specifies a calculation model to estimate the sound insulation or the sound pressure level difference of a façade or other external surface of a building. The calculation is based on the sound reduction index of the different elements from which the façade is constructed and it includes direct and flanking transmission. The calculation gives results which correspond approximately to the results from field measurements in accordance with ISO 16283‑3. Calculations can be carried out for frequency bands or for single number ratings. The calculation results can also be used for calculating the indoor sound pressure level due to for instance road traffic (see Annex E). ISO 12354-3:2017 describes the principles of the calculation model, lists the relevant quantities and defines its applications and restrictions.

Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound

ASTM E3207-21 低频冲击噪声额定值测定的标准分类

1.1?This classification provides methods for calculating single-number ratings of low-frequency impact noise transmission, based on one-third-octave-band impact noise levels as described in Test Methods E492 and E1007. 1.2?This classification defines ratings that are not define

Standard Classification for Determination of Low-Frequency Impact Noise Ratings

GSO ISO 12354-1:2021 建筑声学 根据元件的性能评估建筑物的声学性能 第1部分：房间之间的空气隔声

ISO 12354-1:2017 specifies calculation models designed to estimate the airborne sound insulation between adjacent rooms in buildings, primarily using measured data which characterize direct or indirect flanking transmission by the participating building elements, and theoretically-derived methods of sound propagation in structural elements. A detailed model is described for calculation in frequency bands, in the frequency range 1/3 octave 100 Hz to 3 150 Hz in accordance with ISO 717‑1, possibly extended down to 1/3 octave 50 Hz if element data and junction data are available (see Annex I); the single number rating can be determined from the calculation results. A simplified model with a restricted field of application is deduced from this, calculating directly the single number rating, using the single number ratings of the elements; a method to determine uncertainty is proposed for the simplified model (see Annex K). ISO 12354-1:2017 describes the principles of the calculation scheme, lists the relevant quantities and defines its applications and restrictions.

Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms

GSO ISO 12354-2:2021 建筑声学 根据元件性能评估建筑物的声学性能 第2部分：房间之间的冲击隔音

ISO 12354-2:2017 specifies calculation models designed to estimate the impact sound insulation between rooms in buildings, primarily using measured data which characterize direct or indirect flanking transmission by the participating building elements and theoretically-derived methods of sound propagation in structural elements. A detailed model is described for calculation in frequency bands, in the frequency range 1/3 octave 100 Hz to 3150 Hz in accordance with ISO 717‑1, possibly extended down to 1/3 octave 50 Hz if element data and junction data are available (see Annex E); the single number rating of buildings can be determined from the calculation results. A simplified model with a restricted field of application is deduced from this, calculating directly the single number rating, using the single number ratings of the elements; the uncertainty on the apparent impact sound pressure level calculated using the simplified model can be determined according to the method described in ISO 12354‑1:2017, Annex K (see Clause 5). ISO 12354-2:2017 describes the principles of the calculation scheme, lists the relevant quantities and defines its applications and restrictions.

Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms

PN-EN ISO 717-2-2021-06 E 声学 建筑物和建筑构件的隔音等级 第2部分：冲击隔音（ISO 717-2:2020）

Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation (ISO 717-2:2020)

PN-EN ISO 717-1-2021-06 E 声学 建筑物和建筑构件的隔音等级 第1部分：空气隔音（ISO 717-1:2020）

Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation (ISO 717-1:2020)

BS EN ISO 10140-1:2021 声学 建筑构件隔声的实验室测量 指定产品的应用规则

Acoustics. Laboratory measurement of sound insulation of building elements. Application rules for specific products

DS/EN ISO 10140-1:2021 声学《建筑构件隔声的实验室测量》第1部分：特定产品的应用规则（ISO 10140-1:2021）

Acoustics – Laboratory measurement of sound insulation of building elements – Part 1: Application rules for specific products (ISO 10140-1:2021)

DS/ISO 10140-1:2021 声学《建筑构件隔声的实验室测量》第1部分：专用产品的应用规则

Acoustics – Laboratory measurement of sound insulation of building elements – Part 1: Application rules for specific products

EN ISO 10140-1:2021 声学.建筑物组件隔音的实验室测定.第1部分:专门产品的应用规则

This document specifies test requirements for the laboratory measurement of the sound insulation of building elements and products, including detailed requirements for the preparation and mounting of the test elements, and for the operating and test conditions. It also specifies the applicable quantities, and provides additional test information for reporting. The general procedures for airborne and impact sound insulation measurements are given in ISO 10140‑2 and ISO 10140-3, respectively.

Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2021)

BS EN ISO 10140-5:2021 声学 建筑构件隔声的实验室测量 测试设施和设备的要求

Acoustics. Laboratory measurement of sound insulation of building elements. Requirements for test facilities and equipment

DS/ISO 10140-4:2021 声学《建筑构件隔声的实验室测量》第4部分：测量程序和要求

Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements

DS/EN ISO 10140-2:2021 声学《建筑构件隔声的实验室测量》第2部分：空气传播隔声的测量（ISO 10140-2:2021）

Acoustics – Laboratory measurement of sound insulation of building elements – Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)

DS/ISO 10140-3:2021 声学《建筑构件隔声的实验室测量》第3部分：冲击隔声的测量

Acoustics – Laboratory measurement of sound insulation of building elements – Part 3: Measurement of impact sound insulation

BS EN ISO 10140-4:2021 声学 建筑构件隔音的实验室测量 测量程序和要求

Acoustics. Laboratory measurement of sound insulation of building elements. Measurement procedures and requirements

DS/ISO 10140-5:2021 声学《建筑构件隔声的实验室测量》第5部分：试验设施和设备要求

Acoustics – Laboratory measurement of sound insulation of building elements – Part 5: Requirements for test facilities and equipment