防水标准-分析测试百科网

T/GDWA 2.1-2017 建筑构造新型防水系统第1部分：高分子反应型自粘防水系统

T/GDWA 2的本部分规定了高分子反应型自粘防水系统适用的防水材料、构造、防水系统的检测和验收。本部分规定的防水系统主要由高分子反应型自粘防水卷材和高分子防水涂料组成，配以建筑地下室、屋面、隧道及地下管廊等节点部位的防水构造图和施工要求，以指导建筑防水工程的设计和施工。本部分适用于工业与民用建筑的地下室、屋面、隧道及地下管廊工程的防水工程。本部分规定的高分子反应型自粘防水系统尤其适用于施工环境潮湿的建筑防水工程。本防水系统规定的各适用防水材料，其产品特点仅供设计人员或其他相关方参考，不构成对

New waterproofing system for building construction part 1: Polymer reactive self-adhesive waterproofing system

ICS: 91.120.30
CCS: F5165
发布: 2017-05-16
实施: 2017-05-22

T/GDWA 1-2017 柔性防水层厚度现场无损测量超声波法

本标准规定了超声波法现场无损测量柔性防水层厚度的方法。本标准适用于新建、改扩建和修缮的建筑工程及市政工程现场单层或多层组合的柔性防水层超声波无损厚度检测，检测结果用于防水隐蔽工程验收或其它方面要求的质量证明。

Ultrasonic method for on-site non-destructive measurement of thickness of flexible waterproof layer

ICS: 91.120.30
CCS: F5165
发布: 2017-05-15
实施: 2017-05-22

ASTM D5683/D5683M-95(2017) 屋顶和防水材料和膜的灵活性的标准测试方法

1.1 This test method measures the flexibility of roofing or waterproofing sheet materials or membranes by bending the test material over a block containing arcs of specific radii at a standard temperature. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

ICS: 91.120.30
CCS
发布: 2017-05-01
实施

DB37/T 5093-2017 非固化橡胶沥青防水涂料工程应用技术规程

本规程适用于新建、改扩建的房屋建筑与市政等防水工程。

Technical specification for engineering application of non-curing rubber asphalt waterproof coating

ICS: 91.120.30
CCS: Q10
发布: 2017-04-26
实施: 2017-06-01

JC/T 2415-2017 用于陶瓷砖粘结层下的防水涂膜

Waterproof coating film used under the bonding layer of ceramic tiles

ICS: 91.120.30
CCS: Q17
发布: 2017-04-12
实施: 2017-10-01

ASTM E1643-11(2017) 用于接触混凝土板下土或颗粒填料的水蒸气缓凝剂的选择设计安装和检查的标准操作规程

1.1 This practice covers procedures for selecting, designing, installing, and inspecting flexible, prefabricated sheet membranes in contact with earth or granular fill used as vapor retarders under concrete slabs. 1.2 Conditions subject to frost and either heave or hydrostatic pressure, or both, are beyond the scope of this practice. Vapor retarders are not intended to provide a waterproofing function. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

ICS: 91.120.30
CCS
发布: 2017-03-01
实施