91.140.10 中央供热系统 标准查询与下载

IEC 60335-2-51-EXV-CMV:2023 家用和类似用途电器.安全.第2-51部分:供暖和厂用水装置用固定循环泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

T/WHAS 060-2023 燃气分户地面辐射供暖技术规程

本文件规定了燃气分户地面辐射供暖的设计、材料、施工、试运行、调试及竣工验收、运行与维护等要求。 本文件适用于新建、扩建或改建的民用建筑，以燃气为能源、热水为介质的分户地面辐射供暖系统。

Technical specification for household floor radiant heating of gas boiler

DB23/T 3632-2023 民用建筑换热站管理规程

Management regulations for heat exchange stations in civil buildings

T/SSM 13-2023 物联网热量表

本文件界定了物联网热量表的术语和定义，规定了要求、检验规则、标志、包装、运输和贮存, 描述了试验方法。  本文件适用于采用内置式电池供电及物联网通信技术的热量表的设计、生产和销售。

IoT heat meter

DB1302/T 571-2023 智慧供热服务规范

本文件规定了智慧供热质量和目标要求、服务要求、基本管理要求、运行与维护、服务质量评价。 本文件适用于智慧供热服务。

Smart heating service specifications

T/XBEIA 001-2023 10 kV、35 kV固体蓄热装置

本文件规定了接入电压10 kV、35 kV固体蓄热装置（以下简称“固体蓄热装置”）的分类与标记、要求、试验方法、检验规则、标志、包装、运输和贮存、安装、调试和验收。 本文件适用于民用建筑、工业建筑和其他热需求领域的额定工作电压为10 kV、35 kV，额定输入功率1 MW以上，蓄热介质为固体，传热介质为热水、热风、蒸汽等的智能电控蓄热装置。 重点论述的内容为以下： 第3章对固体蓄热装置、固体储热材料、热输出介质、传热介质、蓄热体、蓄热体温度、有效蓄热量、有效放热量、热效率九个基本术语进行了定义。 第4章规定了固体蓄热装置的分类与标记要求。 第5章规定了固体蓄热装置的设计、原材料、制造装配、外观、热效率、易接触部位外表面最高温升、管道系统严密性、设备电气控制系统、电气安全、噪声的要求。 第6章规定了试验方法的试验条件，制造和装配、外观、热效率、易接触部位外表面最高温升、管道系统严密性、设备电气控制系统、电气安全、噪声的试验方法。 第7章规定了检验规则的类型、现场检验、型式检验的检验规则、检验的判定规则。 第8章规定了标志、包装及随机文件、运输和贮存的要求。 第9章规定了安装、调试和验收的要求。

Solid heat storage devices of 10 kV and 35 kV

23/30465592 DC BS EN 303-2 加热锅炉 第 2 部分 带强制通风燃烧器的加热锅炉 带雾化油燃烧器的锅炉的特殊要求

BS EN 303-2. Heating boilers - Part 2. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners

23/30465589 DC BS EN 304 加热锅炉 雾化油燃烧器加热锅炉试验规范

BS EN 304. Heating boilers. Test code for heating boilers for atomizing oil burners

T/SCEA 0012-2023 复合防腐预制直埋蒸汽保温管及管路附件

    1     范围　     2     规范性引用文件　     3     术语和定义　     4     产品结构　     5     要求　     6     试验方法　     7     产品检验　     8     产品标识、运输及贮存　     附录A     （规范性） 蒸汽管网工作钢管壁厚计算　     附录B     （资料性） 蒸汽保温管道散热强度推荐表　

Composite anti-corrosion preformed directly buried steam insulating pipes and fittings

T/CASME 158-2022 高热效比家用钢铝复合散热器

本文件规定了高热效比家用钢铝复合散热器的术语和定义、规格、原材料、技术要求、试验方法、检验规则、标志、使用说明书、合格证、包装、运输和贮存。

Household steel aluminum composite radiator with high heat efficiency ratio

CEN/TR 12098-7:2022 建筑物的能源性能 供暖系统的控制 第7部分：随附 TR EN 12098-3:2022 模块 M3-5、6、7、8

This document refers to EN 12098-3:2022, Energy performance of buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8. It contains information to support the correct understanding, use and national adaption of EN 12098-3:2022. This document does not contain any normative provisions.

Energy performance of buildings - Controls for heating systems - Part 7: Accompanying TR EN 12098-3:2022 - Modules M3-5,6,7,8

CEN/TR 12098-6:2022 建筑物的能源性能 供暖系统的控制 第6部分：随附 TR EN 12098-1:2022 模块 M3-5、6、7、8

This document refers to EN 12098-1:2022, Energy performance of buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8. It contains information to support the correct understanding, use and national adaption of EN 12098-1:2022. This document does not contain any normative provisions.

Energy performance of buildings - Controls for heating systems - Part 6: Accompanying TR EN 12098-1:2022 - Modules M3-5,6,7,8

EN 303-5:2021+A1:2022 供暖锅炉.第5部分:用固体燃料,手动和自动填料燃烧,额定热功率300kW以下的采暖锅炉.术语,要求,检验和标识 包含修改件A1,2022

1.1 General This European Standard applies to heating boilers including safety devices up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer. This European Standard deals with significant hazards, hazardous situations and events relevant to heating boilers used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The boilers may operate under natural draught or forced draught. The stoking may work manually or automatically. The boilers may operate under room sealed conditions in case of supervised under pressure in the combustion chamber. The boilers may operate in condensing condition. NOTE This European Standard deals with boilers which are both within and outside of the scope of the Machinery Directive 2006/42/EC. This European Standard contains requirements and test methods for safety, combustion quality, operating characteristics, marking and maintenance of heating boilers and secondary emission reduction appliances and efficiency improvement appliances. It also covers all external equipment that influences the safety systems (e.g. back burning safety device, integral fuel hopper). This European Standard covers only boilers that include burners as a unit. The standard applies to the combination of a boiler body with a solid fuel burner according to EN 15270 as a unit only when the whole unit is tested in accordance with this European Standard. Heating boilers in accordance with this European Standard are designed for central heating installations where the heat carrier is water and the maximum allowable temperature is 110 °C, and which can operate at a maximum allowable operating pressure of 6 bars. For heating boilers with a built-in or attached water heater (storage or continuous flow heater), this European Standard only applies to those parts of the water heater which are necessarily subject to the operating conditions of the heating boiler (heating part). This European Standard does not apply to: heating boilers and other heating appliances which are also designed for the direct heating of the place of installation; cooking appliances; the design and construction of external fuel storage and transportation devices prior to the safety devices of the boiler; room sealed applications above a nominal heat output > 70 kW or operated with positive pressure in the combustion chamber or operated under natural draught; This European Standard specifies the necessary terminology for solid fuel heating boilers, the control and safety related requirements, the design requirements, the technical heating requirements (taking into account the environmental requirements) and testing, as well as the marking requirements. This European Standard is not applicable to heating boilers which are tested before the date of its publication as an EN (European Standard). 1.2 Fuels These boilers may burn either fossil fuels, biogenic fuels or other fuels such as peat, as specified for their use by the boiler manufacturer, in accordance with the requirements of this European Standard. Solid fuels included in this European Standard are categorised as follows. 1.2.1 Biogenic fuels Biomass in a natural state, in the form of: Adaptation to new fuels standards and consideration of new fuels standards in preparation. A log wood with moisture content w ≤ 25 %, according to EN 14961-5; B1 chipped wood (wood chipped by machine, usually up to a maximum length of 15 cm) with moisture content from w 15 % to w 35 %, according to EN 14961-4; B2 chipped wood as under B1, except with moisture content w > 35 %; C1 compressed wood (e.g. pellets without additives, made of wood and/or bark particles; natural binding agents such as molasses, vegetable paraffins and starch are permitted), pellets according to EN 14961-2; (...)

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

DB11/T 1382-2022 空气源热泵系统应用技术规程

Application technical specification for air source heat pump system

DB11/T 1832.14-2022 建筑工程施工工艺规程 第14部分：供暖工程

Construction technology specification for building engineering part 14: heating engineering

DB11/T 2002-2022 农村住宅清洁供暖技术规程

Rural Residential Clean Heating Technical Regulations

T/CABEE 038-2022 城镇智慧供热工程技术通则

本通则适用于新建、改建、扩建的城镇智慧供热工程建设。《通则》内容从智慧供热系统体系架构及分级、平台及软件、设备、功能、验收、运行维护和管理等方面提出了明确的要求。

General rules for urban smart heating engineering technology

DB23/T 3297-2022 严寒地区空气源热泵供暖系统技术规程

Technical specification for air source heat pump heating system in severe cold area

T/HBZXL 006-2022 自采暖铜铝复合柱翼型散热器

本文件规定了自采暖铜铝复合柱翼型散热器的结构、规格、型号及标记、要求、试验方法、检验规则、标志、安装使用说明书、质量证明书及产品合格证、包装、运输和贮存。

Self heating copper aluminum composite column airfoil radiator

T/HBZXL 007-2022 自采暖钢制散热器

本文件规定了自采暖钢制散热器的结构分类、型号与标记、要求、试验方法、检验规则、标志、 安装使用说明书、质量证明书及产品合格证、包装、运输和贮存。

Self heating steel radiator