91.140.10 中央供热系统 标准查询与下载

T/CECS 482-2017 空气源热泵冷剂直热直冷式建筑辐射供暖供冷技术规程

主要内容包括：总则，术语，设备与材料，设计，施工与安装，试运转，调试及系统竣工验收，运行与维护。

Technical specification for air-source heat pump refrigerant radiant heating directly

DB32/T 3303-2017 住宅室内绿色装饰装修技术规程

Technical regulations for residential interior green decoration

NF E31-354-1:2017 供暖锅炉.第1部分:带强制送风燃烧器的供暖锅炉.术语、一般要求、试验和标记

Heating boilers - Part 1 : Heating boilers with forced draught burners - Terminology, general requirements, testing and marking

EN 303-1:2017 供暖锅炉.带强制通风喷嘴的供暖锅炉.第1部分:术语、一般要求、试验与标记

Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology@ general requirements@ testing and marking

DIN EN 15316-1:2017 建筑物的能源性能 系统能源需求和系统效率的计算方法 第1部分：通用和能源性能表达式，模块 M3-1、M3-4、M3-9、M8-1、M8-4；德文版 EN 15316-1:2017

This European Standard is the general frame for the calculation of the energy use and the energy performance of heating and domestic hot water systems. This standards is only dealing with the heat, provided by water based systems, needed for heating, domestic hot water and cooling (e. g. absorption chiller). It specifies how to perform the calculation of the entire installation using the calculation modules (see Table 2) corresponding to the methods defined in the respective standards. It deals with common issues like operating conditions calculation and energy performance indicators. It standardises the inputs and outputs in order to achieve a common European calculation method. It allows the energy analysis of the heating and Domestic hot water systems and sub-systems including control (emission, distribution, storage, generation) by comparing the system losses and by defining energy performance indicators. The performance analysis allows the comparison between systems and sub-systems and makes possible to evaluate the impact of each sub-system on the energy performance of a building. The calculation of the system losses of each part of the heating sub-systems is defined in subsequent standards. Ventilation systems are not included in this standard (e. g. balanced systems with heat recovery), but if the air is preheated or an air heating system is installed, the systems providing the heat to the AHU (Air Handling Unit) are covered by this standard. In Germany Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings is implemented by the national Energieeinsparrecht. The national Energieeinsparrecht is based on national and European Standards and national pre-Standards, which have been specified for implementation in Germany.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017

DIN EN 15316-4-4:2017 建筑物的能源性能 系统能源需求和系统效率的计算方法 第 4-4 部分：热生成系统、建筑一体化热电联产系统，模块 M8-3-4、M8-8-4、M8-11-4；德文版 EN 15316-4-4:2017

This European Standard defines a method for calculation of the energy requirements, electricity production, thermal output and recoverable losses of building-integrated cogeneration units forming part of a heat generation system (space heating and domestic hot water) in a building. Such units are commonly known as micro- or small scale cogeneration, or micro- or small scale CHP.The calculation is based on the performance characteristics of the units, defined in product standards, and on other characteristics required to evaluate the performance of the units as included in the technical building system. In Germany Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings is implemented by the national Energieeinsparrecht. The national Energieeinsparrecht is based on national and European Standards and national pre-Standards, which have been specified for implementation in Germany.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4; German version EN 15316-4-4:2017

DIN EN 15316-4-8:2017 建筑物能源性能.系统能量要求和系统功效的计算方法.第4-8部分:空间发热系统,热风供热和辐射供热系统，包括炉灶（当地），模块M3-8-8;德文版本EN 15316-4-8-2017

This standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies.The scope of this specific part is to standardise the:- required inputs;- calculation method;- resulting outputsfor space heating generation by:a) air heating systems, including control,b) overhead radiant heating systems for non-domestic use , including control.c) stovesThis standard does not apply to air heating systems that utilise water as a heat transfer medium. In Germany Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings is implemented by the national Energieeinsparrecht. The national Energieeinsparrecht is based on national and European Standards and national pre-Standards, which have been specified for implementation in Germany.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8; German

DIN EN 15316-4-2:2017 建筑物能源性能.系统能量要求和系统功效的计算方法.第4-2部分:空间发热系统、热泵系统，模块M3-8-2, M8-8-2;德文版本EN 15316-4-2-2017

This European Standard covers heat pumps for space heating, heat pump water heaters (HPWH) and heat pumps with combined space heating and domestic hot water production in alternate or simultaneous operation, where the same heat pump delivers the heat to cover the space heating and domestic hot water heat requirement. The standard provides a calculation method under steady conditions that corresponds to one calculation step. The results of this calculation are incorporated in larger building models and take in account the influence of the external conditions and building control that influence the energy requirements for heating supplied by the heat pump system. In Germany Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings is implemented by the national Energieeinsparrecht. The national Energieeinsparrecht is based on national and European Standards and national pre-Standards, which have been specified for implementation in Germany.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2; German version EN 15316-4-2:2017

DIN EN 12831-1:2017 建筑物的能源性能 设计热负荷的计算方法 第1部分：空间热负荷，模块 M3-3；德文版 EN 12831-1:2017

This standard specifies methods for calculating the design heat loss and the design heat load for basic cases at the design conditions. Basic cases comprise all buildings:- with a limited room height (not exceeding 5 m);- assumed to be heated to steady state conditions under the design conditions. Examples of such buildings are: residential buildings; office and administration buildings; schools; libraries; hospitals; recreational buildings; prisons; buildings used in the catering trade; department stores and other buildings used for business purposes; industrial buildings.In the annexes, information is also given for dealing with the following special cases:- high ceiling buildings or large enclosure;- buildings where air temperature and mean radiant temperature differ significantly.

Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3; German version EN 12831-1:2017

NF E31-354-2:2017 供暖锅炉.第2部分:强制送风喷嘴式供暖锅炉.带雾化油燃烧器的供暖锅炉的特定要求

Heating boilers - Part 2 : Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners

EN 303-2:2017 供暖锅炉.带强制通风喷嘴的供暖锅炉.第2部分:雾化喷油嘴锅炉的特殊要求

This European Standard is applicable to boilers used for central heating in accordance with prEN 303 1:2016 up to a nominal heat output of 1 000 kW and EN 303 4 up to a nominal heat output of 70 kW with forced draught burners in accordance with EN 267 that are designed for operating with liquid fuels. The performance requirements of this standard apply to type testing to heating boilers (standard, low temperature and condensing boilers) which are tested on a test rig in accordance with the test code given in EN 304. This standard applies also to room sealed boilers as defined in EN 15035 regarding efficiency and emissions. This standard can also be used as the basis for evaluation of boiler-/burner units.

Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners

BS EN 15378-3:2017 建筑物的能源性能-建筑物的供暖和DHW系统-第3部分：测量能源性能、模块M3-10、M8-10

Energy performance of buildings. Heating and DHW systems in buildings. Measured energy performance, Module M3-10, M8-10

BS EN 15316-4-4:2017 建筑物的能源性能 系统能源需求和系统效率的计算方法 供热系统、建筑一体化热电联供系统、模块 M8-3-4、M8-8-4、M8-11-4

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4

BS EN 12831-1:2017 建筑物的能源性能 设计热负荷的计算方法 空间热负荷 模块 M3-3

Energy performance of buildings. Method for calculation of the design heat load. Space heating load, Module M3-3

BS EN 15316-1:2017 建筑物的能源性能 系统能源需求和系统效率的计算方法 一般和能源性能表达式 模块 M3-1、M3-4、M3-9、M8-1、M8-4

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4

EN 12831-3:2017 建筑物的能源性能 设计热负荷的计算方法 第3部分：生活热水系统热负荷和需求表征，模块 M8-2、M8-3

This European Standard describes a method to calculate the power and the storage volume required for the dimensioning of domestic hot water systems (DHW). The applicability ranges from direct water heaters (no storage volume and a comparatively large effective heating power) to larger storage systems with a comparatively small heating power and large storage volumes. This European Standard is applicable to the following water storage systems: - storage systems characterized by a minimal mixing zone, (such as stratified charging storage tanks or storage tanks with external heat exchangers): these systems are nominated in this standard as "charging storage systems"; - storage tank water heaters and warm water storage tanks with a pronounced mixing zone (such as DHW storage tanks with internal heat exchangers), nominated in this standard as "mixed storage systems"; and for different uses. The Scope also includes standardization methods for determining the energy need for domestic hot water. This European Standard covers the domestic hot water needs in buildings. The calculation of the energy needs for DHW-Systems applies to residential and non-residential buildings, a building or a zone of a building. Figure 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1. NOTE 1 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1. Table 1 shows the relative position of this standard within the EPB package of standards. (...)

Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3

EN 12831-1:2017 建筑物的能源性能 设计热负荷的计算方法 第1部分：空间热负荷 模块 M3-3

Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load@ Module M3-3

BS EN 15316-4-2:2017 建筑物能源性能.系统能量要求和系统功效的计算方法.空间发热系统、热泵系统，模块M3-8-2, M8-8-2

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2

BS EN 15459-1:2017 建筑物的能源性能 建筑物能源系统的经济评估程序 计算程序 模块 M1-14

Energy performance of buildings. Economic evaluation procedure for energy systems in buildings. Calculation procedures, Module M1-14

BS EN 15316-4-8:2017 建筑物的能源性能 系统能源需求和系统效率的计算方法 空间供暖发电系统、空气加热和架空辐射供暖系统 包括炉灶（本地） 模块 M3-8-8

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8