91.160.10 室内照明 标准查询与下载
共找到 217 条与 室内照明 相关的标准，共 15 页
LED灯具要求、照明数量与质量、照明标准值、控制与配电、节能措施
Requirement for LED Lighting Design of Automotive Fectonary
- ICS
- 91.160.10
- CCS
- E509
- 发布
- 2020-05-15
- 实施
- 2020-05-15
Specifications for lighting design of classrooms in primary and secondary schools and kindergartens
- ICS
- 91.160.10
- CCS
- P31
- 发布
- 2020-02-28
- 实施
- 2020-05-01
Light and lighting — Energy performance of lighting in buildings
- ICS
- 91.160.10
- CCS
- 发布
- 2019-01-24
- 实施
本标准从建筑节能的需求出发,对建筑照明系统节能检测的目的需求进行分析,参考建筑节能设计、建筑节能检测以及照明设计的要求，制订了不同场所的室内照度值、照度均匀度、照明功率密度限值内容，并制定对检测结果的评价方法，标准具有指导性意义。
Indoor Lighting System Energy Saving Monitoring
- ICS
- 91.160.10
- CCS
- K7090
- 发布
- 2018-06-25
- 实施
- 2018-06-26
Art Museum Lighting Specifications
- ICS
- 91.160.10
- CCS
- P31
- 发布
- 2018-04-12
- 实施
- 2018-11-01
Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
- ICS
- 91.160.10
- CCS
- 发布
- 2018-03-09
- 实施
良好的照明可以创造一个使人能有效、精确、安全地完成视觉作业而不引起视觉疲劳和不舒适的视觉环境。照明可以用自然光和电光源，也可以二者结合。 良好的照明包括照明的质量和数量。除了作业面上的照度要求，照明的环境比、眩光水平、颜色特性、频闪效应、光生物安全等对照明质量的评价是不可或缺的。本标准针对应用LED照明产品的医疗建筑不同工作场所和作业类型，提出了建立舒适视觉条件的各项参数，规定了照度、不舒适眩光限制水平、光源色温和显色指数以及效能要求。
LED Lighting in Medical Building - Specifications
- ICS
- 91.160.10
- CCS
- C387
- 发布
- 2018-01-01
- 实施
- 2018-02-02
Aim of optimising the use of daylight in buildings is to improve the quality for people staying in buildings and at the same time a significant reduction in total energy demand. For the lighting design by architects and engineers, the standard allows planning aids for system selection, evaluation and use-oriented design. The basics are shown in the standard, it applies to all rooms in buildings intentionally occupied by people.
Lighting technology - Optimisation of daylight use and artificial lighting - Fundamentals and basic requirements
- ICS
- 91.160.10
- CCS
- 发布
- 2016-07
- 实施
术语与定义、照明技术要求、配电、控制、线路敷设、施工与验收等。
Technical specification of LED lighting for parking garage
- ICS
- 91.160.10
- CCS
- E491
- 发布
- 2016-03-15
- 实施
- 2017-08-11
1.1 This Standard applies to newly produced illuminating appliances constructed entirely of new, unused parts and materials for use with: a) natural gas; b) propane; or c) butane. 1.2 These requirements cover gas-fired lighting appliances intended for either outdoor or indoor installation for attachment to fixed gas piping systems. Appliances approved for indoor use under this Standard are also suitable for use in mobile homes and recreational vehicles when properly installed. 1.3 This Standard is not intended to cover open-flame illuminating appliances having an input rating in excess of 5,000 Btu per hour (1465 W) per burner. 1.4 If a value for measurement as given in this Standard is followed by an equivalent value in other units, the first stated value is to be regarded as the specification. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user shall satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Gas-fired domestic lighting appliances
- ICS
- 91.160.10
- CCS
- 发布
- 2016-03-01
- 实施
Recessed LED luminaires and fixed LED luminaires
- ICS
- 91.160.10
- CCS
- 发布
- 2016-01-28
- 实施
Artificial interior lighting of railway stations buildings. Norms and control methods
- ICS
- 91.160.10
- CCS
- 发布
- 2016
- 实施
- 2017-06-01
Artificial indoor lighting of industrial facility of railway objects. Norms and control methods
- ICS
- 91.160.10
- CCS
- P31
- 发布
- 2016
- 实施
- 2016-10-01
Qualification testing of welders-fusion welding part 1:steels
- ICS
- 91.160.10
- CCS
- 发布
- 2015-07-20
- 实施
이 표준은 AC 220 V, 60 Hz에서 일체형 또는 내장형 LED 모듈 및 LED 소자를 광원으로 사용하는 일반 조명용 매입형 LED 등기구 및 고정형 LED 등기구(이하 “LED 등기구”라 한다.)의 안전과 성능에 관한 요구사항에 대하여 규정한다.?
Recessed LED luminaires and fixed LED luminaires
- ICS
- 91.160.10
- CCS
- 发布
- 2014/12/3
- 实施
- 2014/12/3
이 표준은 1 000 V를 넘지 않는 전원에서 사용하는 일체형 또는 내장형 LED모듈 및 LED 소자를 광원으로 하는 LED 투광 등기구(이하 “LED 등기구”라 한다.)의 안전 및 성능 요구사항에 대하여 규정한다.?
LED flood-lighting luminaires
- ICS
- 91.160.10
- CCS
- 发布
- 2014-12-03
- 实施
- 2014-12-03
이 표준은 AC 220 V, 60 Hz에서 일체형 또는 내장형 LED 모듈 및 LED 소자를 광원으로 사용하는 일반 조명용 LED 센서 등기구(이하 “LED 등기구”라 한다.)의 안전과 성능에 관한 요구사항에 대하여 규정한다.?
LED sensor luminaires
- ICS
- 91.160.10
- CCS
- 发布
- 2014-12-03
- 实施
- 2014-12-03
