91.160.10 室内照明 标准查询与下载

AS/NZS 1680.2.2:2008 室内和工作场所照明第 2.2 部分：特定应用 办公室和基于屏幕的任务

Sets out recommendations for the lighting of offices and similar tasks, including screen-based tasks. While the tasks may be commonly performed in interiors called offices？, they may also be performed in other interiors; for example, reading, writing and screen-based tasks frequently occur in most types of interior workplaces.

Interior and workplace lighting Part 2.2: Specific applications-Office and screen-based tasks

KS C 8103-2007(2022) 荧光灯用台灯

Table study lamps for fluorescent lamps

KS C 8103-2007 荧光灯台灯

이 규격은 KS C 7601에 규정한 형광 램프를 사용하여 면학, 독서용 등으로 작업능률

Table study lamps for fluorescent lamps

KS C 8103-2007(2017) 表书房灯荧光灯管

Table study lamps for fluorescent lamps

ISO 30061:2007 应急照明

This standard specifies the luminous requirements for emergency lighting systems installed in premises or locations where such systems are required. It is principally applicable to locations where the public or workers have access.

Emergency lighting

ANSI/UL 1008-2007 转换开关设备的安全标准(照明和电力用闲置的自动、手动和旁路/隔离转换开关)

Requirements cover automatic, manual, and by-pass/isolation transfer switches for use in ordinary locations to provide for lighting and power as follows: a) Automatic transfer switches and by-pass/isolation switches for use in emergency systems in accordance with the National Electrical Code, NFPA 70, and NFPA 99. b) Transfer switches for use in optional stand-by systems in accordance with NFPA 70. c) In legally required stand-by systems in accordance with NFPA 70. d) Automatic transfer switches and by-pass/isolation switches in accordance with NFPA 20. e) Non-Automatic transfer switches in accordance with NFPA 70 and NFPA 99.

Automatic Transfer Switches

DS/EN 15193:2007 建筑物的能源性能 照明的能源要求

This European Standard specifies the calculation methodology for the evaluation of the amount of energy used for indoor lighting inside the building and provides a numeric indicator for lighting energy requirements used for certification purposes. This European Standard can be used for existing buildings and for the design of new or renovated buildings. It also provides reference schemes to base the targets for energy allocated for lighting usage. This European Standard also provides a methodology for the calculation of instantaneous lighting energy use for the estimation of the total energy performance of the building. Parasitic powers not included in the

Energy performance of buildings - Energy requirements for lighting

DIN 5035-8:2007 人工照明.第8部分:工作场所灯具.要求、推荐标准和检验

Artificial lighting - Part 8: Workplace luminaries - Requirements, recommendations and proofing

DIN EN 62034:2007 电池供电的紧急逃生照明设备用自动试验系统

Automatic test systems for battery powered emergency escape lighting (IEC 62034:2006); German version EN 62034:2006

DIN 14644:2007 低电压作业灯

This Standard specifies requirements for working lights which are used by the fire brigade.

Working light for low voltage

BS EN 62034:2007 电池供电应急疏散照明自动测试系统

Automatic test systems for battery powered emergency escape lighting

NF C71-820-1:2007 电池供电紧急逃生照明设备的自动试验系统

Automatic test system for battery powered emergency escape lighting.

DIN 5034-3:2007 室内日光照明.第3部分:计算

The document is good for the examination whether the daylight factors in interiors required according to DIN 5034-1 or other sources are secured in view of certain window- or rooflight-dimensions. It further serves to calculate the expected illuminances, daylightfactors and times of use of certain reference points in interiors. Hereby one calculation method is suggested in order to secure the comparability of daylight calculations.#,,#

Daylight in interiors - Part 3: Calculation

DIN 5034-6:2007 室内日光照明.第6部分:采光天窗配合尺寸的简易测定

The document enables its user to roughly determine the appropriate transparent roof area by fixing general parameters concerning obstruction, glazing properties and room-reflectances.#,,#

Daylight in interiors - Part 6: Simplified determination of suitable dimensions for rooflights

UL 1786 BULLETIN-2007 直接插入式夜间照明灯具UL安全性标准

This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and the National Electrical Code, ANSI/NFPA 70. Light source types include incandescent candelabra base lamps, non-replaceable lamps, [fluorescent, neon, or light-emitting diode (LED) type] or electroluminescent panels. 1.2 These requirements cover direct plug in nightlights for insertion into a parallel slot receptacle rated 125 volts maximum. 1.3 These requirements do not cover: (a) cord-connected luminaires; (b) nightlights with more than one receptacle; or (c) direct plug-in devices with other primary functions, such as room deodorizers, insect repellers, or rechargeable flashlights.

UL Standard for Safety Direct Plug-In Nightlights

ASTM D1684-07(2012) 颜色分级用棉花分级室照明的标准实施规程

This practice is useful for establishing and maintaining standard lighting conditions in cotton classing rooms. This permits the classer to make a valid assessment of the color grade of cotton. The cotton classer attempts to classify cotton on the basis of the color the sample and the standard would have in daylight. It is essential that the lighting in a classing room is constant and that it makes the color of cotton appear as nearly as possible as it would in natural daylight. Uniform lighting conditions permit classers to go from one classing room to another without having to make adjustments for wide differences in the amount and quality of lighting.1.1 This practice covers practices in general use in the United States for lighting cotton classing rooms, provides general background information regarding the development and establishment of these practices, and prescribes a test method for appraising the color quality of lamps procured for this purpose. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Lighting Cotton Classing Rooms for Color Grading

ANSI/NECA/IESNA 500-2006 室内安装和维修标准.商业照明系统

This standard describes the installation and recommended maintenance of indoor commercial lighting systems.

Standard for Installing and Maintaining Indoor-Commercial Lighting Systems

IEC 62034:2006 蓄电池供电应急灯的自动试验系统

This International Standard specifies the basic performance and safety requirements for individual products and components that are incorporated into automatic test systems for use with emergency lighting systems on supply voltages not exceeding 1000 V. This standard also specifies the required functionality of a complete automatic test system for an emergency lighting system. This standard is applicable to testing systems consisting of a number of emergency lighting self-contained luminaires or a central battery with associated emergency lighting luminaires. NOTE Manual test facilities that rely on manual initiation and/or visual inspection of the lamp condition are outside the scope of this standard.

Automatic test system for battery powered emergency escape lighting

VDI 6011 Blatt 2-2006 采光和人工照明的优化 屋顶灯

This guideline will deal with the special quality characteristics of daylight in general and with rooflights in particular, especially for these kinds of building: factory buildings (production and storage), retail buildings, buildings with pedestrian circulation, sports halls and swimming baths, schools and kindergartens, cultural buildings such as museums, and atria in these types of landscape while also taking into account work with monitor screens in factory buildings and commercial buildings, and applying to both, new construction and renovation.

Optimization of daylighting and artificial lighting - Rooflights

VDI 6011 Blatt 3-2006 采光和人工照明的优化 室内绿化要求

The present guideline defines requirements relating to the provision of indoor plants with light, and deals with aspects of the use of daylight and artificial lighting. The guideline puts the plant at the centre-point of optimisation measures and will therefore apply to all types of building. Optimisation of lighting for indoor greenery should be harmonized with the actual uses of the building in question. For this reason, VDI 6011 Part 1 and VDI 6011 Part 2 should be taken into consideration in the concrete planning of buildings.

Optimization of daylighting and artificial lighting - Requirements for indoor greenery