93.040 桥梁建筑 标准查询与下载

T/CHTS 10018-2019 《港珠澳大桥施工技术指南 第七分册：钢桥面铺装工程》

本指南共分7章、1个附录，主要内容包括：材料、沥青混合料、设备、桥面铺装施工、施工质量控制等。

Construction Technical Guide for Hong Kong-Zhuhai-Macao Bridge Volume VII: Steel Bridge Deck Pavement Engineering

T/JSJTQX 06-2019 高速公路桥梁支座安装施工指南

本标准从支座安装的事前、事中和事后进行支座安装质量控制，主要包含高速公路桥梁支座安装的技术、材料和机具准备，支座垫石的施工方法，预埋件（预留孔）的施工方法，硫磺砂浆（混凝土）临时支座、砂筒临时支座的施工方法，板式橡胶支座、盆式支座和球型支座的施工方法，并对支座安装检查验收要求进行了规定。

Construction guide for bearing installation of expressway bridges

DB32/T 3642-2019 双向搅拌粉喷桩复合地基技术规程

Technical specification for two-way mixing powder injection pile composite foundation

DB32/T 3644-2019 公路桥梁钢箱梁疲劳裂纹检测、评定与维护规范

Specifications for detection, evaluation and maintenance of fatigue cracks in steel box girders of highway bridges

DB32/T 3643-2019 气压劈裂真空预压加固软土地基技术规程

Air pressure splitting and vacuum preloading to strengthen soft ground technical regulations

T/CHTS 10014-2019 公路特大桥梁供配电系统设备状态评估规程

本规程按照《中国公路学会标准编写规则》(T/CHTS10001—2018)编制。本规程主要技术内容包括:总则、术语和符号、评估要求、状态评估、评估结果应用以及附录。

Regulations for equipment status assessment of power supply and distribution system for extra-large highway bridges

T/CHTS 10015-2019 公路混凝土桥梁体外预应力加固技术指南

本指南共分8章、3个附录,主要内容为:总则、术语与符号、基本规定、材料、加固设计、加固施工、质量检验与验收、养护及维修等。

Technical Guideline for External Prestressed Strengthening of Highway Concrete Bridges

T/CHTS 10012-2019 公路桥梁预应力孔道压浆密实度冲击弹性波检测技术指南

为规范使用冲击弹性波检测桥梁预应力孔道压浆密实度的方法，为检测结果评价提供可靠依据，制定本指南。本指南适用于冲击弹性波检测桥梁预应力孔道的压浆密实度。

Technical guidelines for impact elastic wave detection of grouting density in prestressed tunnels of highway bridges

DB4201/T 581.2-2019 武汉市桥梁隧道养护技术规程 第2部分：隧道

本标准规定了武汉市桥隧养护技术的基本规定、检测与评估、上部结构养护、下部结构的养护、抗震设施和减振设施、附属设施的养护、安全管理、信息和档案资料管理、养护工程的检查与验收的要求。本标准适用于武汉行政区域内已竣工验收后交付使用的一般城镇道路上车行隧道或人行地下通道的养护，不适用于轨道交通隧道。

Wuhan Technical Regulations for Maintenance of Bridges and Tunnels Part 2: Tunnels

DB4201/T 581.1-2019 武汉市桥梁隧道养护技术规程 第1部分：桥梁

本标准规定了武汉市桥隧养护技术的基本规定、检测与评估、上部结构养护、下部结构的养护、抗震设施和减振设施、附属设施的养护、安全管理、信息和档案资料管理、养护工程的检查与验收的要求。本标准适用于武汉行政区域内已运营使用的一般城镇道路上桥梁及公园广场等供车辆、行人通过的桥梁的养护；不适用于轨道交通桥梁。

Wuhan Technical Regulations for Maintenance of Bridges and Tunnels Part 1: Bridges

DB51/T 2596-2019 公路梁式桥梁变刚度支座技术规程

本规程规定了多跨梁桥变刚度支座的应用范围、规范性引用文件、总则、术语和符号、基本规定、产品类型与结构、产品技术要求、产品试验与验收、产品检查与养护等要求。 本规程适用于多跨梁桥的支座设计与施工。

Technical specifications for variable stiffness bearings of highway beam bridges

DB51/T 2598-2019 公路桥梁超高强钢管混凝土技术规程

本规程包括超高强钢管混凝土总则、术语和符号、材料、基本规定、承载力设计、构造原则等内容。 本规程适用于公路桥梁超高强钢管混凝土构件的设计和计算。

Technical specification for ultra-high-strength concrete-filled steel tubes for highway bridges

DB51/T 2597-2019 公路桥梁波折钢-混凝土组合桥面板技术规程

本规程规定了波折钢-混凝土组合桥面板总则、术语和符号、材料、基本规定、承载能力极限状态计算、正常使用极限状态计算、施工计算、构造要求、施工与质量验收等。 本规程适用于采用钢筋混凝土结构或钢结构的梁桥、拱桥、斜拉桥等新建桥梁的主梁桥面结构设计或旧桥桥面结构改造。

Technical specifications for corrugated steel-concrete composite bridge decks of highway bridges

DB45/T 1973-2019 山区高速公路边坡防治施工技术规程

Construction Technical Regulations for Slope Prevention and Control of Mountain Expressway

T/CMEA 3-2019 准静力影响线法桥梁荷载试验技术指南

1.总则；2.术语和符号；3.基本规定；4.桥梁准静载试验；6,。桥梁动载试验。

Technical guide of the bridge load test using the quasi-static influence line

DB36/T 1134-2019 桥涵台背回填泡沫混凝土施工技术规程

Construction technical specification for backfilling foam concrete on bridge and culvert abutment back

DB36/T 1137-2019 桥梁工程BIM技术应用指南

Guidelines for the Application of BIM Technology in Bridge Engineering

ASTM E2103/E2103M-19 桥梁构件的标准分类&x2014；统一格式II

1.1 This standard establishes a classification of bridge elements within the UNIFORMAT II family of elemental classifications. It covers most highway bridges, railroad bridges, and pedestrian bridges. 1.2 UNIFORMAT II classifications have an elemental format similar to the original UNIFORMAT2 building elemental classification. However, the title UNIFORMAT II differs from the original in that it now takes into consideration a wide range of constructed entities that collectively form the built environment. 1.3 Elements, as defined here and in other UNIFORMAT II Classifications, are major physical components that are common within constructed entities. Elements perform their given function(s), regardless of the design specification, construction method, or materials used. 1.4 This elemental classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, and design stages when constructing bridges. 1.5 Using UNIFORMAT II elemental classifications ensures a consistency in the economic evaluation of construction projects over time and from project to project. 1.6 UNIFORMAT II classifications also enhance reporting at all stages of a constructed entity’s life cycle—from feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposal. 1.7 This classification is unsuitable for process applications or for preparing trade estimates. 1.8 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Bridge Elements—UNIFORMAT II

DB41/T 1848-2019 装配式混凝土箱梁桥预算定额

Prefabricated concrete box girder bridge budget quota

DB41/T 1847-2019 装配式混凝土箱梁桥设计与施工技术规范

Technical specification for design and construction of prefabricated concrete box girder bridge