93.080.20 道路建筑材料 标准查询与下载

T/HGMIF 015-2023 绿色设计产品评价技术规范 再生沥青混合料

根据GB/T32161《生态设计产品评价通则》及有关要求，再生沥青混合料的评价指标从产品全生命周期中对资源和能源的消耗、对生态环境和人体健康影响的角度进行选取，包括资源属性、能源属性、环境属性、产品属性指标，按照全生命周期的理念，在产品设计开发阶段系统考虑原材料选用、生产、销售、使用、回收、处理等各个环节对资源环境造成的影响，力求产品在全生命周期中最大限度降低资源消耗、尽可能少用或不用含有害物质的原材料，减少污染物产生和排放，从而实现环保的目的。评价指标设计主要考虑以现执行的国家标准、行业标准为判定依据，根据产品和行业特点，以评价筛选生态设计产品为目的，在测试及征询行业专家、生产厂商意见的基础上，科学、合理地确定指标基准值

Technical specification for green-design product assessment reclaimed asphalt mixture

T/HGMIF 016-2023 绿色设计产品评价技术规范 再生集料水泥稳定混合料

根据GB/T32161《生态设计产品评价通则》及有关要求，再生集料水泥稳定混合料的评价指标从产品全生命周期中对资源和能源的消耗、对生态环境和人体健康影响的角度进行选取，包括资源属性、能源属性、环境属性、产品属性指标，按照全生命周期的理念，在产品设计开发阶段系统考虑原材料选用、生产、销售、使用、回收、处理等各个环节对资源环境造成的影响，力求产品在全生命周期中最大限度降低资源消耗、尽可能少用或不用含有害物质的原材料，减少污染物产生和排放，从而实现环保的目的。评价指标设计主要考虑以现执行的国家标准、行业标准为判定依据，根据产品和行业特点，以评价筛选生态设计产品为目的，在测试及征询行业专家、生产厂商意见的基础上，科学、合理地确定指标基准值。

Technical specification for green-design product assessment recycled aggregate cement-stabilized mixture

T/CIPR 0014-2023 铝污泥陶粒

本文件规定了铝污泥陶粒的术语、定义、制造方法和等级分类、技术要求、试验方法、检验规则和运输。 本文件适用于路基材料、混凝土骨料的铝污泥陶粒及其制备方法。

Aluminum sludge ceramsite

ASTM D7226-13(2023) 用旋转桨式粘度计测定乳化沥青粘度的标准试验方法

1.1 This test method utilizes the rotational paddle viscometer to measure the viscosity of emulsified asphalt. It is applicable to all the emulsified asphalts described in Specifications D977 and D2397/D2397M. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

ASTM E1703/E1703M-10(2023) 用直尺测量路面车辙深度的标准试验方法

1.1 This test method describes the procedure for the measurement of the depth of the rut at a chosen location in a pavement surface using a straightedge and a gauge. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

DB37/T 5244-2022 机制砂混凝土应用技术规程

本规程适用于山东省工程建设中采用机制砂或混合砂生产混凝土时，机制砂或混合砂的检验与使用、混凝土配合比设计和制备、施工及质量验收。

Technical regulations for application of machine-made sand concrete

T/SMHTA 003-2023 灌注式半柔性路面技术标准

随着我国社会经济的高速发展与城市化进程的不断推进，城市机动车保有量和出行需求的逐年提升与交通设施更新速度之间的矛盾日益凸显，各类交通问题损害了城市居民的出行体验。随着道路交通流量的逐步增大，对于路面强度、平整度、稳定性、抗滑性能以及耐久性等多方面特性的要求也在逐步提高，尤其是在车辆载重大、车流量大、车辆运行轮迹相对固定、车辆制动频繁的路段，如交叉口、公交车站、长大纵坡、弯道等。 我国现有的公路及城市道路路面以沥青混凝土路面与水泥混凝土路面为主，即柔性路面与刚性路面。沥青混凝土在高温条件下集料之间的沥青粘结力减弱，在大交通流量、重荷载、高度渠化荷载的路段，柔性路面容易出现车辙、波浪、拥包等变形破坏，降低路面使用性能。刚性路面容易出现水泥板断板、开裂、脱空、错台、唧泥等病害，并且行驶舒适性欠佳，修复较为困难。 灌注式半柔性路面介于柔性路面与刚性路面之间，具有优异的强度、耐油性、耐酸性、抗滑性能、高温稳定性、水稳定性以及耐久性。灌注式半柔性路面至今已在日本、美国以及欧洲已得到较为广泛的应用与研究。目前我国已有多家单位与高校展开了针对半柔性路面的设计与施工等方面的研究，形成了一定的应用基础，但在材料选用、结构组合设计以及施工工艺等方面还存在较大的优化空间。为促进并指导上海市半柔性路面的应用，特制订本标准。 本标准按照GB/T1.1-2020《标准化工作导则 第一部分 标准化文件的结构和起草规则》的规定编写。

Technical Standard for Poured Semi-Flexible Pavement

JT/T 1466-2023 预应力孔道压浆料用制浆设备

本标准适用于卧轴式预应力孔道压浆料用制浆设备的生产、检验和使用。

Pulp making equipment for prestressed tunnel grouting material

JT/T 819-2023 公路工程 水泥混凝土用机制砂

本标准适用于公路工程水泥混凝土及其制品用机制砂的生产、检验和使用。

Machine-made sand for cement concrete in highway engineering

DB14/T 2656-2023 铁尾矿集料公路路面基层施工技术规程

本文件规定了铁尾矿集料在路面基层中的应用的适用条件、术语与定义、原材料技术要求、混合料技术要求、施工、质量管理与验收相关技术要求。 本文件适用于各等级公路路面基层、底基层的施工及验收，其他道路可参照执行。

Technical specification for construction of iron tailings aggregate road pavement base

DB14/T 2676-2023 钢筋混凝土防撞护栏滑模施工技术规程

本文件规定了钢筋混凝土防撞护栏滑模施工的术语和定义、材料、滑模施工、质量管理及验收等内容。 本文件适用于公路工程直线及曲线半径不小于500m路段的支撑式现浇钢筋混凝土防撞护栏施工。

Technical specification for slipform construction of reinforced concrete anti-collision guardrail

DB14/T 2655-2023 公路铁尾矿集料混凝土施工技术规程

本文件规定了公路工程中铁尾矿集料水泥混凝土的原材料技术要求、混凝土配合比、混凝土生产与施工、质量管理与验收等内容。 本文件适用于公路桥涵、隧道、路面及附属工程，市政、铁路、水利等工程可参照使用。

Technical specification for construction of highway iron tailings aggregate concrete

23/30464840 DC BS EN 13282-3 液压道路粘合剂 第 3 部分：性能稳定性的评估和验证

BS EN 13282-3. Hydraulic road binders - Part 3. Assessment and verification of constancy of performance

DB22/T 3432-2023 公路钢护栏石墨烯复合防腐涂料应用技术规范

Technical specifications for the application of graphene composite anti-corrosion coatings on highway steel guardrails

DB22/T 3431-2023 沥青混合料回收料分离及应用技术规范

Technical specification for separation and application of asphalt mixture recycled materials

ASTM D4866/D4866M-88(2023) 含矿物骨料和可选聚合物混合物的煤焦油沥青乳化路面密封剂混合物的标准性能规范

1.1 This performance specification covers mixtures of emulsified coal-tar pitch (mineral colloid type), mineral aggregates, and optional polymeric admixtures that are used as a weatherprotective and straight aliphatic hydrocarbon resistant coatings over bituminous pavements of airports, parking areas, and driveways. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 The following safety hazards statement applies only to the test method portion, Section 6, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Coal-Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

ASTM D8099/D8099M-17(2023) 沥青乳化路面密封剂（矿物胶体或化学稳定型）标准规范

1.1 This specification covers water-based asphalt emulsion (mineral colloid or chemically stabilized type) pavement sealer suitable for use as a weather-protective coating over bituminous pavements, such as roadways, parking areas, and driveways. NOTE 1—Application shall be made in accordance with a forthcoming ASTM standard on the application of asphalt emulsion pavement sealer. 1.2 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)

ASTM D6433-23 道路和停车场路面状况指数调查的标准实施规程

1.1 This practice covers the determination of roads and parking lots pavement condition through visual surveys using the pavement condition index (PCI) method of quantifying pavement condition. 1.2 The PCI represents the collective judgement of pavement maintenance engineers and is an indirect measurement of pavement structural integrity (not capacity) and pavement functional condition indicators such as roughness. The PCI is not intended to replace the direct measurement of ride, structural capacity, or friction. 1.3 The PCI for roads and parking lots was developed by the U.S. Army Corps of Engineers (1, 2).2 It is further verified and adopted by DOD and APWA. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

DB63/T 2081-2022 高寒地区公路桥面防水工程技术规范

Technical specifications for waterproof engineering of highway bridge decks in alpine regions

DB11/T 2073-2022 沥青路面厂拌热再生技术规范

Technical specifications for asphalt pavement plant mix hot recycling