93.080.40 街道照明和有关设备 标准查询与下载

AS/NZS 1158.1.1:2005 道路和公共场所照明第 1.1 部分：车辆交通（V 类）照明 性能和设计要求（合并第 1 号修正案：02/2009；第 2 号修正案：06/2013 和第 3 号修正案：10/2015）

Specifies performance and design requirements for Category V lighting schemes as described in AS/NZS？1158.0. Also specifies data needed to design for and assess compliance with those requirements.

Lighting for roads and public spaces Part 1.1: Vehicular traffic (Category V) lighting-Performance and design requirements (Incorporating Amendment No.1: 02/2009; Amendment No.2: 06/2013 and Amendment No.3: 10/2015)

AS/NZS 1158.3.1:2005 道路和公共场所照明．人行道区域（P类）照明．性能和设计要求

Specifies performance and design requirements for Category P lighting schemes as described in AS/NZS 1158.0. Also specifies data needed to design for and assess compliance with those requirements.

Lighting for roads and public spaces - Pedestrian area (Category P) lighting - Performance and design requirements

AS/NZS 1158.2:2005 道路和公共场所照明．V类和P类照明的光亮技术参数的计算用计算机程序

Specifies the computer-based procedures for the design and evaluation of Category V and Category P lighting schemes in accordance with AS/NZS 1158.1.1 and AS/NZS 1158.3.1 respectively. Includes basic formulae for relevant light technical parameters and relevant calculation fields. The hardcopy includes Programs SAA STAN and STANSHELL for Category V straight road lighting designs provided on accompanying CD ROM.

Lighting for roads and public spaces - Computer procedures for the calculation of light technical parameters for Category？V and Category？P lighting

AS/NZS 1158.0:2005 道路和公共场所照明．介绍

Serves as a general introduction to the AS/NZS 1158 series and provides definitions of lighting categories and technical terms essential to the understanding of other Standards in the series especially AS/NZS 1158.1.1, 1158.2, 1158.3.1 and 1158.6.

Lighting for roads and public spaces - Introduction

NF X90-006-3:2005 道路照明.第3部分:性能计算

Road lighting - Part 3 : calculation of performance.

NF X90-006-2:2005 道路照明.第2部分:性能要求

Road lighting - Part 2 : performance requirements.

DIN EN 40-2:2005 灯柱.第2部分:一般要求和尺寸

This European Standard specifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns. This Part does not attempt to restrict the actual appearance or shape of the column or bracket.#,,#

Lighting columns - Part 2: General requirements and dimensions; German version EN 40-2:2004

DIN 67520-4:2005 交通安全用反光材料.第4部分:微棱镜结构物反光板的光测量最低要求

The document states the minimum values of the coefficient of retroreflection R' for unused retro-reflective micro-prismatic sheetings for traffic safety. The minimum values are stated for the different colours and different observation angles and entrance.

Retroreflecting materials for traffic safety - Part 4: Photometric minimum requirements for retroreflective sheeting of microprismatic constructions

EN 40-4:2005 灯杆.第4部分:钢筋混凝土和预应力混凝土灯杆的要求

This document specifies requirements for reinforced and prestressed concrete lighting columns. It applies to columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns.

Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

ANSI C136.3-2005 道路照明设备.照明装置附件

Covers attachment features of luminaires used in roadway and area lighting equipment. The features covered apply to luminaires that are side- or post-top-mounted.

Roadway and Area Lighting Equipment - Luminaire Attachments

LST EN 40-2-2004 灯柱 第2部分：一般要求和尺寸

Lighting columns - Part 2: General requirements and dimensions

BS PD 6547:2004+A1:2009 BS EN 40-3-1和BS EN 40-3-3使用指南

This Published Document gives guidance and background information to specifiers and manufacturers of lighting columns on the use of BS EN 40-3-1 and BS EN 40-3-3, which specify the design of lighting columns. In particular, it gives guidance on the information which the specifier is required to give to the manufacturer to allow a suitable lighting column to be designed, such as the topography factor, site wind speed, site altitude and terrain category, which are used to determine the design wind pressure.

Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3

DS/CEN/TR 13201-1:2004 道路照明 第1部分：照明等级的选择

This document specifies the lighting classes set out in EN 13201-2 and gives guidelines on the application of these classes. To do this, it includes a system to define an outdoor public traffic area in terms of parameters relevant to lighting. To assist in the application of classes, it suggests a practical relationship between the various series of lighting classes, in terms of comparable or alternative classes. It also gives guidelines on the selection of the relevant area to which the lighting classes from EN 13201-2 and the calculation grids and procedure from EN 13201-3 should be applied.

Road lighting - Part 1: Selection of lighting classes

DS/EN 40-2:2004 灯柱 第2部分：一般要求和尺寸

This document specifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns. This Part does not attempt to restrict the actual appearance or shape of the column or bracket.

Lighting columns - Part 2: General requirements and dimensions

JT/T 609-2004 公路隧道照明灯具

本标准规定了公路隧道照明灯具的分类与命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以荧光灯、钠灯等气体放电灯为光源的公路隧道用照明灯具。隧道用其他灯具可参照执行。

Highway tunnel lighting luminaires

DB31/T 324-2004 城市道路检查井盖技术规范(适用于高强度钢纤维混凝土和聚合物复合材料检查井盖)

The technical specification for manhole cover and frame of city road

BS EN 40-2:2004 灯柱.一般要求和尺寸

This document specifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns. This Part does not attempt to restrict the actual appearance or shape of the column or bracket. The majority of lighting columns are normally of a stepped tubular, round, octagonal or polygonal cross-section. Lighting columns may be manufactured from materials other than those listed in the foreword (e.g. wood, plastic, cast iron) or in other forms (e.g. lattice and telescopic). This document specifies performance related to the essential requirements of resistance to horizontal (wind) loads and performance under vehicle impact (passive safety) in support of the Essential Requirement No 4 Safety in use measured according to the corresponding test methods included in this document or available in separate documents.

Lighting columns - General requirements and dimensions

ANSI C136.6-2004 道路照明设备.路灯的金属头和反光器组件.机械互换性与光学互换性

This standard covers dimensional features of luminaires with metal heads that permit mechanical and optical interchangeability of both head and reflector assemblies.

Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability

BS PD CEN/TR 13201-1:2004 道路照明.第1部分:照明级别的选择

This document specifies the lighting classes set out in EN 13201-2 and gives guidelines on the application of these classes. To do this, it includes a system to define an outdoor public traffic area in terms of parameters relevant to lighting. To assist in the application of classes, it suggests a practical relationship between the various series of lighting classes, in terms of comparable or alternative classes. It also gives guidelines on the selection of the relevant area to which the lighting classes from EN 13201-2 and the calculation grids and procedure from EN 13201-3 should be applied. The parameters used in this document allow: a) a lighting situation to be described in terms of: ? the geometry of the area under consideration; ? the use of the area; ? the influence of the surrounding environment; b) a specific approach to situations to be taken to enable the effective use of energy. This document does not give the criteria on which a decision to light an area can be made, nor on how a lighting installation should be used. This document does not give guidelines on the selection of lighting classes for toll stations, tunnels or canals and locks.

Road lighting - Part 1: Selection of lighting classes

LST EN 13201-3-2004 道路照明 第3部分：性能计算

Road lighting - Part 3: Calculation of performance