95.020 标准查询与下载

STANAG 2020-2021 陆地操作报告 ATP-105 A 版

LAND OPERATIONAL REPORTS - ATP-105 EDITION A

STANAG 4396-2020 弹药的交感反应测试程序 AOP-4396 A 版

SYMPATHETIC REACTION TEST PROCEDURES FOR MUNITIONS - AOP-4396 EDITION A

STANAG 4605-2020 战术燃料处理设备（TFHE）技术特性 AFLP-07 D 版

TACTICAL FUEL HANDING EQUIPMENT (TFHE) TECHNICAL CHARACTERISTICS - AFLP-07 EDITION D

STANAG 2644-2020 北约反炮台射击学说 AArtyP-02 A 版

NATO COUNTER BATTERY FIRES DOCTRINE - AArtyP-02 EDITION A

STANAG 7093-2020 北约陆地系统汽车油液指南规范 AFLP-7093 C 版

GUIDE SPECIFICATION FOR NATO LAND SYSTEM AUTOMOTIVE FLUIDS - AFLP-7093 EDITION C

STANAG 1457-2020 盟军反潜战手册 科学和支持数据补充 ATP-28 第 II 卷 B 版

ALLIED ANTISUBMARINE WARFARE MANUAL - SCIENTIFIC AND SUPPORTING DATA SUPPLEMENT - ATP-28 VOLUME II EDITION B

STANAG 1110-2020 北约武装部队燃料、润滑剂和相关产品的允许劣化限值 AFLP-1110 B 版

ALLOWABLE DETERIORATION LIMITS FOR NATO ARMED FORCES FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - AFLP-1110 EDITION B

STANAG 2040-2020 担架、轴承支架和附件支架 AMedP-2.1 B 版

STRETCHERS, BEARING BRACKETS AND ATTACHMENT SUPPORTS - AMedP-2.1 EDITION B

STANAG 2116-2020 北约军事人员等级代码 APersP-01 A 版

NATO CODES FOR GRADES OF MILITARY PERSONNEL - APersP-01 EDITION A

STANAG 1175-2020 盟国和多国海事语音报告程序 APP-01/MPP-01 D 版

ALLIED AND MULTINATIONAL MARITIME VOICE REPORTING PROCEDURES - APP-01/MPP-01 EDITION D

STANAG 3102-2020 共同地面/空域的飞行安全合作 AFSP-1.2 B 版

FLIGHT SAFETY COOPERATION IN COMMON GROUND/AIRSPACE - AFSP-1.2 EDITION B

STANAG 4718-2020 声纳浮标数字遥测 ANEP-96 A 版

SONOBUOY DIGITAL TELEMETRY - ANEP-96 EDITION A

ASTM E3112/E3112M-20 防弹产品和射击包的标准测试方法

1.1 This test method assesses resistance to complete penetration by projectiles and applies to ballistic-resistant products or shoot packs, either flexible or rigid, that are intended to provide protection against projectiles from small arms.2 This test method does not assess blunt impact resistance. 1.2 This test method does not apply to body armor, armor panels, inserts, trauma packs, trauma plates, materials, or other items intended to be worn or located against the body to limit blunt trauma. 1.3 This test method applies only to products related to homeland security and public safety. 1.4 This test method is not intended to address architectural products covered by Test Method F1233, such as building materials and security glazing. 1.5 This test method is applicable to products or shoot packs that are constructed with identical layups of ballistic materials over the entire product or shoot pack. The product or shoot pack may have stitching, seams, or other joints. NOTE 1—For example, this test method is applicable for evaluating a ballistic-resistant blanket constructed from multiple sheets of different materials laminated together; however, this test method is not applicable for evaluating a ballistic-resistant shield that has a discontinuity at the interface between opaque and transparent component materials. 1.6 The test method does not specify performance criteria or usage of the test results. 1.7 It is anticipated that this test method will be referenced by certifiers, purchasers, or other users in order to meet their specific needs. 1.7.1 In this test method, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of this test method. Purchasers and other users are responsible for the “other standards and specifications” and for specifying any requirements that supersede those of this test method. 1.7.2 Purchasers and other users will specify the ballistic test threats, and the associated velocities, to be used. 1.8 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.8.1 The user of this standard will identify the system of units to be used, and it is critical to ensure that any crossreferenced standards maintain consistency of units between standards. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Ballistic-resistant Products and Shoot Packs

DB33/T 2207-2019 人民防空固定式警报设施建设管理规范

Civil Air Defense Fixed Alarm Facilities Construction Management Specifications

ASTM E3112/E3112M-19 防弹产品和射击包的标准测试方法

Standard Test Method for Ballistic-resistant Products and Shoot Packs

ISO 17201-3:2019 声学射击场噪声第3部分:声传播计算

This document specifies methods of predicting the sound exposure level of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exposure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO 17201-2. This document applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent, at distances where peak pressures, including the contribution from projectile sound, are less than 1 kPa (154 dB). NOTE National or other regulations, which could be more stringent, can apply.

Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations

ISO 17201-1:2018 声学 - 射击场的噪音 - 第1部分:通过测量确定枪口爆炸

This document specifies a method to determine the acoustic source energy of the muzzle blast for calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent. It is applicable at distances where peak pressures less than 1 kPa (equivalent to a peak sound pressure level of 154 dB) are observed. The source energy, directivity of the source and their spectral structure determined by this procedure can be used as input data to sound propagation programmes, enabling the prediction of shooting noise in the neighbourhood of shooting ranges. Additionally, the data can be used to compare sound emission from different types of guns or different types of ammunition used with the same gun. This document is applicable to guns used in civil shooting ranges but it can also be applied to military guns. It is not applicable to the assessment of hearing damage or sound levels in the non-linear region. Suppressors and silencers are not taken into consideration in this document.

Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement

ASTM E1773-18 用多硫化物基密封剂密封刚性墙战术庇护所的标准做法

1.1 This practice covers the procedures for sealing rigid wall tactical shelters. It outlines the techniques for the storage, mixing, handling, and application of polysulfide based sealants. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

ASTM E3112-17 抗冲击产品和射包的标准试验方法

5.1 The test method is intended to determine the resistance to penetration of a ballistic-resistant product or shoot pack to specified projectiles impacting at specified velocities. No other properties of the ballistic-resistant product or shoot pack are evaluated by this test method. 5.2 This test method may be used by private-sector and government laboratories, manufacturers, research and development organizations, and others assessing the ballistic resistance of products or shoot packs or performing research and development of new products. 5.3 It is intended that this test method be referenced by other standards, specifications, or test methods. 1.1 This test method assesses resistance to complete penetration by projectiles and applies to ballistic-resistant products or shoot packs, either flexible or rigid, that are intended to provide protection against projectiles from small arms.2 This test method does not assess blunt impact resistance. 1.2 This test method does not apply to body armor, armor panels, inserts, trauma packs, trauma plates, materials, or other items intended to be worn or located against the body to limit blunt trauma. 1.3 This test method applies only to products related to homeland security and public safety. 1.4 This test method is not intended to address architectural products covered by Test Method F1233, such as building materials and security glazing. 1.5 This test method is applicable to products or shoot packs that are constructed with identical layups of ballistic materials over the entire product or shoot pack. The product or shoot pack may have stitching, seams, or other joints. Note 1: For example, this test method is applicable for evaluating a ballistic-resistant blanket constructed from multiple sheets of different materials laminated together; however, this test method is not applicable for evaluating a ballistic-resistant shield that has a discontinuity at the interface between opaque and transparent component materials. 1.6 The test method does not specify performance criteria or usage of the test results. 1.7 It is anticipated that this test method will be referenced by certifiers, purchasers, or other users in order to meet their specific needs. 1.7.1 In this test method, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of this test method. Purchasers and other users are responsible for the “other standards and specifications” and for specifying any requirements that ......

Standard Test Method for Ballistic-resistant Products and Shoot Packs

DB41/T 1354-2016 人民防空工程标识

Civil Air Defense Engineering Logo