95.020 标准查询与下载

GOST R 56133-2014 军工产品出口用集成物流支持. 装甲技术操作和维护期间的数据命名和收集格式

Integrated logistic support of exporting military products. Data nomenclature and format to collect during armored technics operation and maintenance

GOST R 56112-2014 军工产品出口用集成物流支持. 技术操作能力保证计划

Integrated logistic support of exporting military products. General requirements for technical operating capabilities assurance programmes

GOST R 55978-2014 空间系统和空间站. 生态安全的通用要求. 生态安全的战术和技术要求的发展建议

Space systems and station. General reqirements for ecological safety. Recommendations for the development of tactical and technical requirements for ecological safety

GOST R 56114-2014 军工产品出口用集成物流支持. 军工产品出口用物流支持分析要求

Integrated logistic support of exporting military products. Requirements to logistic support analysis for exporting military product

GOST R 56131-2014 军工产品出口用集成物流支持. 军工产品生命周期期间的集成物流支持

Integrated logistic support of exporting military products. Integrated logistic support during military product life cycle

SAE AS5726A-2013 微型军需品用接口,接口标准

This standard only defines interconnect, electrical and logical (functional) requirements for the interface between a Micro Munition and the Host. The physical and mechanical interface between the Micro Munition and Host is undefined. Individual programs will define the relevant requirements for physical and mechanical interfaces in the Interface Control Document (ICD) or system specifications. It is acknowledged that this does not guarantee full interoperability of Interface for Micro Munitions (IMM) interfaces until further standardization is achieved.

Interface Standard, Interface for Micro Munitions

BS EN 16341:2012 防卫产品和设备用标准和类似标准文档的选择.参考顺序

Selection of standards and standard-like documents for defence products and services. Order of preference

ANSI/ASTM F2679:2013 低能量气枪用6mm射弹的规范

Specification for 6mm Projectiles Used with Low Energy Air Guns

LST EN 16341-2012 国防产品和服务的标准和类标准文件的选择 优先顺序

Selection of standards and standard-like documents for defence products and services - Order of preference

SAE AIR5788A-2012 CLAR法(CLARA)用普通发射可接受区域(CLAR)事实数据生成器接口控制文件(ICD)

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This document specifies the CLARA interfaces of the CLAR Truth Data Generator. The objective for the CLAR Truth Data Generator is to produce impact data sets to be used in the CLAR Coefficient Generator first to score and form LAR boundaries, and then to generate coefficients. A model of the weapon system that predicts weapon delivery performance to a predefined accuracy is to be used for this purpose. The model can be the Six-Degree-Of- Freedom (6DOF) equations of motion or another mathematical representation that meets the objective for the weapon system LAR.

Common Launch Acceptability Region (CLAR) Truth Data Generator Interface Control Document (ICD) for the CLAR Approach (CLARA)

SAE AS5680A-2012 引信密封机械接口

This interface standard applies to fuzes used airborne weapons that use a 3-in fuze well. It defines: Physical envelope of the fuze well at the interface with the fuze; Load bearing surfaces of the fuze well; Physical envelope of the fuze and its connector; Mechanical features (e.g. clocking feature); Connector type, size, location and orientation; Retaining ring and its mechanical features (e.g. thread, tool interface); Physical envelope of the retaining ring at the interface with the fuze; Physical space available for installation tools; Torque that the installation tool shall be capable of providing. This standard does not address: Materials used or their properties; Protective finish; Physical environment of the weapon; Explosive interface or features (e.g. insensitive munitions (IM) mitigation); Charging tube; Torque on the retaining ring or loads on the load bearing surfaces. Each fuze and weapon combination should be evaluated to ensure that the weapon system will satisfy all safety, reliability, and performance requirements throughout its lifecycle.

Fuze Well Mechanical Interface

DS/EN 16341:2012 国防产品和服务的标准和类标准文件的选择 优先顺序

This Standard applies to the provision, development, use, improvement and disposal of defence products and services in accordance with Chapter 2 of Directive 2009/81/EC. It also applies to measures intended to maintain the operational readiness of product

Selection of standards and standard-like documents for defence products and services - Order of preference

DIN EN 16341:2012 军用产品和服务用标准和类似标准文档的选择.选择次序.德文版本EN 16341-2012

Selection of standards and standard-like documents for defence products and services - Order of preference; German version EN 16341:2012

DS/CWA 15517:2012 欧洲国防采购手册

This CWA provides information about the CEN Workshop 10 """"Standardization for Defence Procurement"""" (2002-2005 for Phase I, 2007-2008 for Phase II and 2010-2011 for Phase III) and its deliverable, the website """"European Handbook for Defence Procurement"""".The European Handbook for Defence Procurement contains lists of recommended standards and specifications to be used in Defence Procurement for the following topics:- NBC detectors (CBRN Defence)- Energetic materials- Fuels and lubricants- Batteries- Packaging- Electrical interfaces- Electromagnetic environment- Environmental engineering- Armoured Land Vehicle Technology- Ammunition- Paints and coati

European Handbook for Defence Procurement

BS CWA 15517:2011 欧洲国防采购指南

European Handbook for Defence Procurement

ISO/CD 17201-2:2011 声学 射击场的噪声 第 2 部分：枪口爆炸的预测

Acoustics — Noise from shooting ranges — Part 2: Prediction of muzzle blast

DS/CLC/TR 50538:2011 为军事目的设计的设备的 EMC 指令符合性指南

This Technical Report is applicable to any non-exempt military equipment.This Technical Report does not affect the requirements to meet military standards. This Technical Report only covers aspects related to EMC as covered by the EMC Directive 2004/108/EC and other directives that address EMC. In this respect there is no distinction between civilian and defence equipment.For the purpose of this Technical Report the term “military” is equivalent to the term “defence”.Annex B describes Article 346 and Annex C provides the associated EC Council List of items under Article 346 [12].The definitions in EMC Directive 2004/108/EC of “apparatus” and “fixed installa

Guide to EMC Directive conformity of equipment designed for military purposes

ASTM E1773-10 用多硫化物基密封剂密封刚性壁作战掩体的标准操作规程

This recommended practice is intended to provide information on the storage, mixing, handling, and application of polysulfide based sealants. Tooling and equipment requirements for the satisfactory application of the sealants to joints in tactical shelters are also provided.1.1 This practice covers the procedures for sealing rigid wall tactical shelters. It outlines the techniques for the storage, mixing, handling, and application of polysulfide based sealants. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

SAE AS5726-2009 迷你军需用品接口,接口标准

This standard only defines interconnect, electrical and logical (functional) requirements for the interface between a Micro Munition and the Host. The physical and mechanical interface between the Micro Munition and Host is undefined. Individual programs will define the relevant requirements for physical and mechanical interfaces in the Interface Control Document (ICD) or system specifications. It is acknowledged that this does not guarantee full interoperability of Interface for Micro Munitions (IMM) interfaces until further standardization is achieved. The purpose of this standard is to minimize proliferation of divergent electrical interfaces between the Host and Micro Munitions to promote interoperability across different programs and services. This standard applies to all Hosts and Micro Munitions that electrically interface with each other. A Micro Munition is a weapon characterized by a mass up to 25 kilograms and a minimum outer diameter of 38 millimeters. Other munitions may use this standard

Interface Standard, Interface for Micro Munitions

BS CWA 15044:2009 采矿机械的评价和试验

Test and evaluation of demining machines