97.220.10 标准查询与下载

T/CASME 732-2023 家用和类似用途跑步机技术要求

本文件规定了家用和类似用途跑步机的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存和质量承诺。

Technical requirements for treadmills for home and similar purposes

ASTM F1551-23 合成草坪运动表面和材料综合表征的标准测试方法

Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials

ASTM F1346-23 游泳池、水疗中心和热水浴缸的安全罩的标准性能规范和所有罩的标签要求

1.1  This specification establishes requirements for safety covers for swimming pools, spas, hot tubs, and wading pools (hereinafter referred to as pools, unless otherwise specified). When correctly installed and used in accordance with the manufacturer's instructions, this specification is intended to reduce the risk of drowning by inhibiting the access of children under five years of age to the water. 1.2  This specification includes performance tests to demonstrate the compliance or noncompliance to requirements herein stated for safety covers. It also includes marking requirements for all covers. 1.3  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4  The following safety hazards caveat pertains only to the test methods section, Section 9 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

T/HTSJ 014-2023 悬浮运动地板

悬浮运动地板的术语和定义、总要求、分类、技术要求、试验方法、取样要求、检验规则及使用与维护保养。

Floating sports floor

T/HTSJ 017-2023 体育场地设施企业管理规范

本文件规定的所有要求适用于各种类型、不同规模和提供不同体育场地设施产品和服务的组织。 

Management standard for sports facilities enterprises

T/HTSJ 016-2023 国标体育场地设施产品评价规范

国标体育场地设施产品评价规范的术语和定义、国标体育场地设施产品分类、评价原则、评价通用要求、国标体育场地设施产品等级评价要求。

Evaluation standard for national standard sport venue product

T/HTSJ 015-2023 国标体育场地评价规范

国标体育场地评价规范的术语和定义、国标体育场地分类、评价原则、评价通用要求、国标体育场地评价规则。

Evaluation standard for national standard sport venue

DB43/T 2649-2023 食品接触材料及制品 1-己烯迁移量的测定

Determination of 1-hexene migration in food contact materials and products

T/HTSJ 013-2023 软塑运动地板

软塑运动地板的术语和定义、要求、试验方法、铺装技术要求、取样要求、检验规则、标志、包装、运输、贮存。

Elastomer plastic sports floor

T/SCSVA 0002.1-2023 《体育运动场地建设和验收》第1部分：合成材料面层

本标准规定了体育运动场地合成材料面层建设与验收的术语和定义、分类、基础层要求、原材料及成品面层质量控制、面层施工要求、验收等。 本标准适用于中小学、幼儿园、大专院校、公共及社会体育运动场地合成材料面层新建、改建、扩建工程的建设和验收。竞赛类运动场地面层、丙烯酸涂层面层有害物质限量及气味等级可参照执行。 本标准不适用于悬浮地板。

"Construction and Acceptance of Sports Venues" Part 1: Synthetic Material Surface

GSO ASTM F3188:2023 人造草坪填充材料中可萃取有害金属的标准规范

This specification covers all extractable hazardous metals (man-made or natural) that are intended for use as infill materials for synthetic turf sports surfaces. It specifies the amount of certain metals that have the potential to be extracted from synthetic turf infill materials if ingested. The time, temperature, and pH of the extraction fluid approximate the conditions the infill material would experience in the stomach during the digestive process. The levels of extractable metals are compared to maximum levels allowed in children's toys.This specification includes requirements with respect to performance (hazardous metal content), test methods, sampling, apparatus, reagents, and procedure.

Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials

T/CIPR 100-2023 弹跳力训练装置

本文件规定了弹跳力训练装置的分类、型号及示例、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于训练使用的弹跳力训练装置的制造。

Jump training device

T/HTSJ 012-2023 半预制合成材料面层运动场地

半预制合成材料面层运动场地的术语和定义、分类、技术要求、试验方法、取样要求及检验规则。

Sports areas with semi-prefabricated synthetic surfaces

T/CSSS 002-2023 健康成年人身体活动能量消耗参考值

本文件给出了健康成年人常见身体活动能量消耗参考值。 本文件适用于18岁～64岁健康成年人群常见身体活动能量消耗值的估算。

Physical activity energy expenditure reference value of healthy adults

T/HTSJ 011-2023 体育场地设施从业人员评价规范

体育场地设施从业人员的职业种类、能力要素、能力要素等级要求和评价方法。

Evaluation standard for practitioners of sports facilities

ASTM F1777-19(2023) 彩弹游戏现场操作的标准实施规程

1.1 This practice establishes minimum safety requirements for the operation of paintball playing game sites, and provides for certain materials and procedures required. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Paintball Game Site Operation

ASTM F2286-16(2023) 游泳池、热水浴缸和Spa用可拆卸网状围栏的标准设计和性能规范

1.1 This specification outlines the performance and design requirements for removable mesh safety barriers used for barriers for swimming pools, hot tubs, and spas to reduce the incidence of injuries or death for infants and children up to and including five years of age. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas

T/HTSJ 010-2023 天然-人造混合草坪管理规范

天然-人造混合草坪场地分类和分级、场地要求、人造草与天然草要求、施工质量要求、监理质量要求、检验方法及检验规则及验收质量要求。

Management specification for natural-artifical hrbird turf

BS EN 15330-4:2022 运动区域的表面 主要设计用于户外的合成草皮和针刺表面 合成草皮、针刺和纺织运动表面使用的减震垫规范

This document specifies minimum performance and durability requirements for shockpads used within synthetic turf and textile sports surfacing systems. The document also specifies appropriate performance tolerance for production and on-site quality control procedures. This document does not cover structural properties of shockpads. Where appropriate, compliance with other European or national standards and guidelines for these aspects should be followed. characteristics of the playing surface, any infill within the playing surface and the shockpad. The selection of the correct combination of each is complex and the responsibility of the sports surface system designer. It is important to take this into account when considering the performance of a shockpad. A shockpad alone is not be expected to satisfy the performance requirements of the complete sports surfacing system as specified in provision of the required sports performance properties. Some of these additional functions can, by design, mean that full compliance with all requirements of this document is not appropriate. the different synthetic turf for needle-punch textile sports surface designs. available. If such guidance or regulations are available, they supersede Annex E.

Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Specification for shockpads used with synthetic turf, needle-punch and textile sports surfaces

DB14/T 2654-2023 健身步道现浇型合成材料面层 质量要求

本文件规定了健身步道现浇型合成材料面层的术语和定义、基本要求、外观、物理性能、化学性能。 本文件适用于现浇型合成材料面层健身步道的检测与验收。

Quality requirements for cast-in-place synthetic material surfaces for fitness walkways