97.220.10 标准查询与下载

BS EN 17467:2022 运动区域的表面 测定合成或有机填充颗粒静载后残余变形的试验方法

1   Scope This document specifies a test method for the determination of the residual deformation and visual inspection of synthetic or organic granules used in synthetic turf for sports surfaces after static load.

Surfaces for sports areas. Test method for the determination of the residual deformation of synthetic or organic infill granules after static load

T/CAAB 0001-2022 健身步道指南

本文件规定了健身步道的通用要求、标识系统要求、材料要求、检测方法、合格判定规则及验收评定要求。 本文件适用于新建、改建和扩建的健身步道。

Fitness Trail Guidance

T/GDID 1043-2022 人造草坪软基础技术要求及检验方法

主要技术内容有术语和定义、结构、技术要求、检验方法和合格判定规则。

Technical requirements and test methods for soft base of artificial turf

DB34/T 4149-2022 体育场馆运营管理规范

Gym Operations Management Specifications

DB34/T 4148-2022 游泳场馆风险管理规范

Risk Management Specifications for Swimming Centers

T/QAQ 003-2022 学校运动场地用弹性颗粒

包括学校运动场地用弹性颗粒的术语和定义、产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。

Elastic granules for school sports grounds

T/QAQ 002-2022 学校运动场地用人造草

包括学校运动场地用人造草的术语和定义、产品分类和规格、要求、试验方法、检验规则及标志、包装、运输、贮存。

Artificial grass for school sports fields

T/QAQ 004-2022 学校运动场地人造草坪用填充砂

包括学校运动场地人造草坪用填充砂的术语和定义、产品分类、要求、试验方法、检验规则及标志、包装运输、贮存。

Filling sand for artificial turf in school sports field

T/QAQ 006-2022 学校运动场地人造草合成面层 检验验收规范

包括学校运动场地人造草面层检验验收规范的术语和定义、一般规定、实验室检验项目、现场验收、现场验收方法、验收规则。

Specification for inspection and acceptance of artificial turf synthetic surface for school sports field

T/QAQ 005-2022 学校运动场地人造草坪用弹性垫层

包括学校运动场地人造草坪用弹性垫层产品的术语和定义、要求、试验方法、检验规则及标志、包装、运输、贮存。

Resilient underlayment for artificial turf in school sports fields

BS EN 17435:2021 运动区域的表面 测定头部受伤标准（HIC）和临界坠落高度（CFH）的试验方法

What is BS EN 17435 about?   BS EN 17435 on surfaces for sports areas specifies test methods for measuring the impact attenuation of sports surfaces. Three different methods are specified.   In Procedure A, a series of tests are undertaken from differing drop heights and the HIC values are plotted, and the Critical Fall Height is determined   In Procedure B, a single test is undertaken from differing drop heights and the HIC values are plotted, and the Critical Fall Height is determined   In Procedure C a series of tests are made at a fixed drop height and the maximu...

Surfaces for sports areas. Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)

KS G 7001-2021 车辆使用者防护头盔

Protective helmets for vehicular users

T/CAMF KD001-2021 卡丁车场地技术规范

本标准规定了卡丁车场地的分类与等级划分要求、赛道、安全设施、赛事设施、功能性建筑及附属设施、管网设施和夜间照明的技术要求。

Technical specifications for karting venues

ASTM F2940-21 空气软场操作的标准实施规程

1.1 This practice establishes minimum safety requirements for the operation of air soft playing fields, and provides for certain materials and procedures required. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Air Soft Field Operation

ASTM F1015-21 人造草皮运动表面相对耐磨性的标准试验方法

1.1 This test method is applicable to both laboratory and field measurement of synthetic turf surfaces used for sports. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

ASTM F3188-16(2021) 合成草皮填充材料中可提取有害金属的标准规范

1.1 This specification relates to the amount of certain metals that have the potential to be extracted from synthetic turf infill materials if ingested. The time, temperature, and pH of the extraction fluid approximate the conditions the infill material would experience in the stomach during the digestive process. The levels of extractable metals are compared to maximum levels allowed in children’s toys. 1.2 This specification applies to all materials (man-made or natural) that are intended for use as infill materials for synthetic turf sports surfaces. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials

T/JSEA 001-2021 游泳场馆服务规范

本标准规定了游泳场馆服务规范的术语和定义、基础要求、服务保障、服务提供、服务质量与改进的要求。 本标准适用于满足人们进行游泳健身活动的经营性室内游泳场馆。 文本格式依据GB/T 1.1—2020给定的规则。 主要内容依据GB 19079.1-2013《体育场所开放条件与技术要求　第1部分：游泳场所》和江苏省五台山体育中心的企业标准Q/WTSBZ?1033-2021《游泳馆服务规范》。

Swimming pool service specification

OENORM S 4720-2021 公共浴池水域的游乐设备 技术安全要求 OENORM EN 17232 的附加要求

Play equipment in the water area of public baths - Technical safety requirements - Additional requirements to OENORM EN 17232

PN-EN 16582-1+A1-2021-10 E 家用游泳池 第1部分：包括安全和测试方法在内的一般要求

Domestic swimming pools - Part 1: General requirements including safety and test methods

OENORM EN 12230-2021 运动场表面 合成运动表面拉伸性能测定的试验方法

Surfaces for sports areas - Test method for the determination of tensile properties of synthetic sports surfaces