A15 电影与摄影技术 标准查询与下载

BS ISO 2907:2003 电影.35mm电影胶片上最大可放映画面区域.位置和尺寸

This International Standard specifies the maximum dimensions of the film image area intended for projection from a 35 mm motion-picture film and the position of this area relative to the perforations and the reference edge of the film. This International Standard specifies three types of image areas intended for theatrical projection (see A.4 in informative annex A): — Style A: general theatrical release prints commonly referred to as non-anamorphic or wide screen; — Style B: theatrical release prints with an anamorphic image; — Style C: classic theatrical prints.

Cinematography - Maximum projectable image area on 35 mm motion-picture film - Position and dimensions

BS ISO 8567:2003 电影.35mm和16mm电影发行拷贝上说明字幕的最大允许区域.尺寸和位置

This International Standard specifies the position and dimensions of the maximum area permitted for subtitles on 35 mm and 16 mm motion-picture release prints for normal projection as specified in ISO 359 and ISO 2907. This International Standard does not replace ISO 1223:—, Cinematography —Picture areas for motion-picture films for television — Position and dimensions, which specifies the safe areas for prints intended for transmission by television. note: 1) To be published. (Revision of ISO 1223:1993)

Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions

KS A ISO 1230:2003 摄影摄影.闪存指南数的测定方法

이 규격은 반사갓이 장착 또는 미장착된 사진용 섬광 램프와 전자식 플래시 장치를 포함하

Photography-Determination of flash guide numbers

KS A ISO 1189:2003 电影摄影.35mm电影用磁性声音的录音特性.图片电影除外.规格

이 규격은 상영용 자기 녹음 프린트 이외의 35 mm 영화용 필름에 자기 사운드를 녹음할

Cinematography-Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints-Specifications

ISO 1223:2003 电影技术.电视用影片和幻灯片的画面区域.位置和尺寸

This International Standard specifies the screw connections to be used between a camera and a tripod or other accessories.

Cinematography - Picture areas for motion-picture films for television - Position and dimensions

DIN ISO 8374:2003 摄影技术.ISO安全光条件测定

Photography - Determination of ISO safelight conditions (ISO 8374:2001)

KS A ISO 1754:2002 摄影.使用35mm胶片和胶卷的照相机.画幅尺寸

이 규격은 영상 치수가 카메라 틀에 따라 정해지는 카메라로 만들어진 스틸 사진의 영상

Photography－Cameras using 35mm film and roll film－Picture sizes

KS A ISO 12608:2002 电影摄影.电视电影用工作的空间及环境

이 규격은 텔레비전 또는 비디오 작업의 환경 및 조건에 관한 것으로 공간의 치수, 컬러 모

Cinematography－Room and surround conditions for evaluating television display from telecine reproduction

KS A ISO 12606:2002 电影摄影.电影和电视用磁性录音媒体的管理和养护

이 규격은 영화와 텔레비전용 자기 오디오 녹음 매체의 보존과 저장고의 조건에 대한 권장 사

Cinematography－Care and preservation of magnetic audio recordings for motion pictures and television

KS A ISO 12611:2002 电影摄影.国际素材交换的35mm磁片带头检测信号.规范和位置

이 규격은 2트랙에서 6트랙까지의 영화용 오디오 마스터 필름의 국제 유통을 위한 헤드 리더

Cinematography－Audio head tones for use in international exchange of 35 mm magnetic film masters－Specifications and location

BS ISO 2939:2002 电影术.在35mm电影发行拷贝上的画面.位置和尺寸

This International Standard specifies the position and dimensions of picture image areas on 35 mm motion-picture release prints, which have been assigned for optical projection based on ISO 2907 or transmitted by television based on ISO 1223.

Cinematography - Picture image area on 35 mm motion-picture release prints - Position and dimensions

ISO 7004:2002 摄影技术.工业用射线照相胶片.置于X射线和γ射线下的胶片ISO感光度、ISO平均梯度和ISO梯度G2和64的测定

This International Standard specifies methods for determining sensitometric curve shape, ISO speed, ISO average gradient and ISO gradients G2 and 64 for industrial radiographic systems consisting of film and film processing when exposed directly to X-rays and γ-rays. The measurement of characteristics of film systems used in industrial radiography with fluorescent intensifying screens is not specified in this International Standard. NOTE Units of measured energy are given for information in annex A.

Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and 64 when exposed to X- and gamma-radiation

ISO 2939:2002 电影摄影.35mm电影发行拷贝上画面区域.位置和尺寸

This International Standard specifies the position and dimensions of picture image areas on 35 mm motion-picture release prints, which have been assigned for optical projection based on ISO 2907 or transmitted by television based on ISO 1223.

Cinematography - Picture image area on 35 mm motion-picture release prints - Position and dimensions

BS ISO 7589:2002 摄影.感光测定用光源.日光、白炽钨丝和洗印机规范

This International Standard specifies the spectral characteristics of illuminants for sensitometry appropriate for evaluating camera films used for pictorial photography in natural daylight, studio tungsten and photoflood, including colour and black-and-white films, both reversal and negative types, and for evaluating black-and-white papers used with incandescent tungsten printers. It also describes methods for evaluating the acceptability of illuminants for sensitometry and specifies tolerances. It does not include illuminants for use with colour papers, since this would need to take account of the coloured mask of the negative material, for which no standard information is at present available.

Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer

BS ISO 17266:2002 电影摄影.35mm电影胶片图和负片上多通道逻辑和数字图片声音和控制记录,以及70mm电影胶片图和负片上数字图片声音和控制记录.正片和宽度尺寸

This International Standard specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.

Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions

ISO 491:2002 电影摄影.35mm电影胶片和涂磁胶片.剪切和穿孔尺寸

This International Standard specifies the cutting and perforating dimensions for 35 mm unexposed motion-picture film and 35 mm magnetic film, and the types of perforations used.

Cinematography - 35 mm motion-picture film and magnetic film - Cutting and perforating dimensions

ISO 5758:2002 电影.供交换用影片及磁性(声迹)素材.容器标签的最低限内容

This International Standard specifies the information to be included on the label and/or accompanying documents, for identifying the contents of containers for processed motion-picture film and magnetic sound records. It specifies the minimum information necessary for the exchange of materials NOTE It does not apply to the labelling of containers of unexposed motion-picture films and magnetic materials specified in ISO 3042.

Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials

ISO 2907:2002 电影技术.在35mm电影胶片上可放映的最大影象区.位置和尺寸

This International Standard specifies the maximum dimensions of the film image area intended for projection from a 35 mm motion-picture film and the position of this area relative to the perforations and the reference edge of the film. This International Standard specifies three types of image areas intended for theatrical projection (see A.4 in informative annex A): — Style A: general theatrical release prints commonly referred to as non-anamorphic or wide screen; — Style B: theatrical release prints with an anamorphic image; — Style C: classic theatrical prints.

Cinematography - Maximum projectable image area on 35 mm motion-picture film - Position and dimensions

ISO 8567:2002 电影摄影.在35mm和16mm电影发行拷贝上说明字幕的最大允许区域.尺寸和位置

This International Standard specifies the position and dimensions of the maximum area permitted for subtitles on 35 mm and 16 mm motion-picture release prints for normal projection as specified in ISO 359 and ISO 2907. This International Standard does not replace ISO 1223:—, Cinematography —Picture areas for motion-picture films for television — Position and dimensions, which specifies the safe areas for prints intended for transmission by television. note: 1) To be published. (Revision of ISO 1223:1993)

Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions

ISO 17266:2002 电影摄影.在35mm和70mm电影拷贝及底片上多频道模拟数字电影摄影声音和控制录音.位置和宽度尺寸

This International Standard specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.

Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions