A41 数学 标准查询与下载

GOST R ISO 22514-8-2015 统计方法. 过程管理. 第8部分. 多态生产过程的机械性能

Statistical methods. Process management. Part 8. Machine performance of a multi-state production process

GOST R ISO 22514-3-2015 统计方法. 过程管理. 第3部分. 离散零件测量数据的整机性能研究

Statistical methods. Process management. Part 3. Machine performance studies for measured data on discrete parts

GOST R ISO 13053-1-2015 统计方法. 过程改进中的定量方法. 六标准差. 第1部分. DMAIC方法

Statistical methods. Quantitative methods in process improvement «Six Sigma». Part 1. DMAIC methodology

GOST R ISO 13053-2-2015 统计方法. 过程改进中的定量方法. 六标准差. 第2部分. 技术

Statistical methods. Quantitative methods in process improvement «Six Sigma». Part 2. Techniques

GOST R ISO 7870-2-2015 统计方法. 控制图. 第2部分. 休哈特控制图

Statistical methods. Control charts. Part 2. Shewhart control charts

GOST R ISO 3951-1-2015 统计方法. 通过变量检验的取样程序. 第1部分. 按验收质量限制 (AQL) 检索且用于单一质量特征和单一验收质量限制逐批检验的单次抽样计划规范

Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by AQL for lot-by-lot inspection for a single quality characteristic and a single AQL

GOST R ISO 17258-2015 统计方法. 过程改进中的定量方法. 六标准差. 基准

Statistical methods. Quantitative methods in process improvement «Six Sigma». Benchmarking

GOST R ISO 22514-1-2015 统计方法. 过程管理. 第1部分. 通用原则

Statistical methods. Process management. Part 1. General principles

GOST R ISO 11843-6-2015 统计方法. 检测能力. 第6部分. 利用常态近似值在泊松分布中进行临界值和最小可检测值测定的方法体系

Statistical methods. Capability of detection. Part 6. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

GOST R ISO 22514-2-2015 统计方法. 过程管理. 第2部分. 时间依赖性进程模型的处理能力和性能

Statistical methods. Process management. Part 2. Process capability and performance of time-dependent process models

KS B ISO 8062-1:2014 产品几何技术规范(GPS).模制件尺寸和几何公差.第1部分:词汇

Geometrical product specifications(GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary

NF X06-075-1*NF ISO 22514-1:2014 过程管理中的统计学方法.能力及性能.第1部分:总则及概念

La présente partie de l'ISO 22514 décrit les principes fondamentaux de l'aptitude et de la performance des processus de fabrication. Elle a été élaborée pour fournir des recommandations concernant les circonstances dans lesquelles une étude d'aptitude est exigée ou nécessaire pour déterminer si le résultat d'un processus de fabrication ou le matériel de production (une machine de fabrication) est acceptable selon des critères appropriés. Ces circonstances sont courantes dans le processus de contrôle de la qualité, lorsque l'objet de l'étude fait partie intégrante d'un certain type d'acceptation de la production.Ces études peuvent également être utilisées lo

Statistical methods in process management - Capability and performance - Part 1 : general principles and concepts

DIN ISO 2859-1:2014 计数抽样检验程序.第1部分:用于逐批检验按可接受质量界限(AQL)检索的抽样计划

Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English

DIN EN 1325:2014 价值管理. 词汇. 术语和定义; 德文版本EN 1325-2014

Value Management - Vocabulary - Terms and definitions; German version EN 1325:2014

BS ISO 22514-8:2014 过程管理的统计方法. 能力和性能. 多态生产过程的机械性能

Statistical methods in process management. Capability and performance. Machine performance of a multi-state production process

BS ISO 22514-1:2014 过程管理的统计方法.容量和性能.一般原则和概念

Statistical methods in process management. Capability and performance. General principles and concepts

ISO 22514-1:2014 过程管理统计方法.能力和性能.第1部分:一般原则和概念

This part of ISO 22514 describes the fundamental principles of capability and performance of manufacturing processes. It has been prepared to provide guidance about circumstances where a capability study is demanded or necessary to determine if the output from a manufacturing process or the production equipment (a production machine) is acceptable according to appropriate criteria. Such circumstances are common in quality control when the purpose for the study is part of some kind of production acceptance. These studies can also be used when diagnosis is required concerning a production output or as part of a problem solving effort. The methods are very versatile and have been applied for many situations. This part of ISO 22514 is applicable to the following: — organizations seeking confidence that their product characteristics requirements are fulfilled; — organizations seeking confidence from their suppliers that their product specifications are and will be satisfied; — those internal or external to the organization who audit it for conformity with the product requirements; — those internal to the organization who deal with analysing and evaluating the existing production situation to identify areas for process improvement.

Statistical methods in process management - Capability and performance - Part 1: General principles and concepts

ISO 13322-1:2014 粒度分析.图像分析法.第1部分:静态图像分析法

This part of ISO 13322 is applicable to the analysis of images for the purpose of determining particle size distributions where the velocity of the particles against the axis of the optical system of the imaging device is zero. The particles are appropriately dispersed and fixed in the object plane of the instrument. The field of view may sample the object plane dynamically either by moving the sample support or the camera provided this can be accomplished without any motion effects on the image. Captured images can be analysed subsequently. This part of ISO 13322 concentrates upon the analysis of digital images created from either light or electron detection systems. It does not address the method of creating the image although the detection settings chosen together with its calibration are important to particle sizing accuracy. This part of Both the type of distribution, (by number or by volume) together with the width of the particle size distribution has a very material influence upon the number of particles to be measured to secure the desired accuracy within the specified confidence limits. An example is shown in Annex A. Automation of the analysis is possible in order to measure sufficient particle numbers for a required degree of precision. This part of ISO 13322 does not address the sample preparation. However, the sub sampling, dispersion and presentation of particles to be measured are a vital part of the operational chain of actions necessary to ensure accuracy and precision of any final result. NOTE Further details about sampling and sample preparation can be found in ISO 14887 and ISO 14488.

Particle size analysis - Image analysis methods - Part 1: Static image analysis methods

BS ISO 3534-4:2014 统计学. 词汇和符号. 调查取样

Statistics. Vocabulary and symbols. Survey sampling

ISO 3534-4:2014 统计学. 词汇和符号 第4部分: 调查取样

Statistics - Vocabulary and symbols - Part 4: Survey sampling