A42 物理学与力学 标准查询与下载

DIN ISO 9211-4:2014 光学和光子学. 光学涂层. 第4部分:特定试验方法 (ISO 9211-4-2012)

Optics and photonics - Optical coatings - Part 4: Specific test methods (ISO 9211-4:2012)

ISO/TS 16550:2014 纳米技术. 通过金黄色葡萄球菌释放胞壁酸对银纳米颗粒效力的测定

Nanotechnologies - Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus

ISO/TR 16197:2014 纳米技术. 制造纳米材料毒理学筛选方法的编制和描述

Nanotechnologies - Compilation and description of toxicological screening methods for manufactured nanomaterials

IEC 62607-3-1:2014 纳米制造. 关键控制特性. 第3-1部分: 发光纳米材料. 量子效率

This part of IEC 62607 describes the procedures to be followed and precautions to be observed when performing reproducible measurements of the quantum efficiency of luminescent nanomaterials. Luminescent nanomaterials covered by this method include nanoobjects such as quantum dots@ nanophosphors@ nanoparticles@ nanofibers@ nanocrystals@ nanoplates@ and structures containing these materials. The nanomaterials may be dispersed in either a liquid state (e.g.@ colloidal dispersion of quantum dots) or solid-state (e.g.@ nanofibers containing luminescent nanoparticles). This standard covers both relative measurements of liquid state luminescent nanomaterials and absolute measurements of both solid and liquid state nanomaterials.

Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency

DIN 19698-1:2014 固体特性. 固体和半固体材料的取样. 第1部分: 未知成分库存的分段取样指南

Characterization of solids - Sampling of solid and semi-solid materials - Part 1: Guidance for the segmental sampling of stockpiles of unknown composite

BS ISO 12154:2014 通过体积排量测定密度. 通过气体比重瓶测定法测定骨架密度

Determination of density by volumetric displacement. Skeleton density by gas pycnometry

DIN EN 61788-12:2014 超导性. 第12部分:超导体基体的体积比测量. Nb3Sn复合超导导线的铜与非铜的体积比 (IEC 61788-12-2013); 德文版本EN 61788-12-2013

Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013

DIN IEC/TS 62607-3-2:2014 纳米加工.关键控制特性.第3-2部分:发光纳米粒子.量子点分散质量的测定(IEC 113/203/CD-2013)

Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)

DIN EN 61788-5:2014 超导性. 第5部分: 超导或体积比测量矩阵. Cu/Nb-Ti复合超导线材的铜与超导体体积比(IEC 61788-5-2013); 德文版本EN 61788-5-2013

Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013

BS ISO 9022-23:2013 光学和光子学.环境试验方法.寒冷、室温及干燥和湿热下的低压

Optics and photonics. Environmental test methods. Low pressure combined with cold, ambient temperature and dry and damp heat

BS EN 61788-18:2013 超导性. 机械性能测量. Ag和/或Ag合金护套Bi-2223和Bi-2212复合超导体的室温拉伸试验

Superconductivity. Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors

BS EN 61672-3:2013 电声学.声级计.周期性试验

Electroacoustics. Sound level meters. Periodic tests

IEEE Std C63.4-2014 从频率范围为9 kHz至40 GHz的低压电气和电子设备排放的无线电噪声辐射的测量方法用美国国家标准

American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

DIN ISO 9277:2014 用气体吸附法进行固体表面积测定.BET法(ISO 9277-2010)

Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)

ISO/TR 14786:2014 纳米技术.选定的纳米物体化学命名法制定的注意事项

Nanotechnologies - Considerations for the development of chemical nomenclature for selected nano-objects

ISO/TS 12901-2:2014 纳米技术.适用于工程纳米材料的职业风险管理.第2部分:联合控制方法的使用

Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 2: Use of the control banding approach

BS EN 61672-1:2013 电声学.声级计.规格

Electroacoustics. Sound level meters. Specifications

ISO/TS 13830:2013 纳米技术.包含已制造纳米对象的消费者产品自愿标签导则

This Technical Specification provides guidance on the content of voluntary labels for consumer products containing manufactured nano-objects (PCMNO). This Technical Specification is not applicable to consumer products that contain naturally occurring nano-objects that were not subjected to manufacturing processes. Consumer products containing nanoobjects that are incidentally present (i.e. unintentional by-products of a process) are also outside the scope of this Technical Specification.

Nanotechnologies.Guidance on voluntary labelling for consumer products containing manufactured nano-objects

ISO/TS 80004-8:2013 纳米技术.词汇表.第8部分:纳米加工工艺

This Technical Specification gives terms and definitions related to nanomanufacturing processes in the field of nanotechnologies. It forms one part of multi-part terminology and definitions documentation covering the different aspects of nanotechnologies.

Nanotechnologies.Vocabulary.Part 8: Nanomanufacturing processes

ISO 9022-23:2013 光学和光子学.环境试验方法.第23部分:寒冷、室温及干燥和湿热下的低压

This part of ISO 9022 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices),under equivalent conditions, for their ability to resist the influence of low air pressure combined with cold, including the potential condensation and freezing of water, ambient temperature, and dry or damp heat.

Optics and photonics.Environmental test methods.Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat