A83 包装方法 标准查询与下载

JIS Z 0216:1991 包装件和包装容器的喷水试验方法

この規格は，散水による包装貨物及び容器の耐水性並びに内容品の保護性の試験方法について規定する。

Water spray test for packages and containers

NF H03-003-2:1990 木料包装.水果和蔬菜的矩形六面体体运输包装..第２部分:托盘化装运载荷的试验大纲

Wooden packaging. Rectangular parallepipedal packages for fresh fruit and vegetables transpor, tray. Part 2 : programme of tests on palletized loads.

DIN 55436-2:1990 包装试验.铝管.管体变形性的测定

This standard describes cylindrical tubes made of aluminium by DIN 5061 Teil 1. The test is for the determination of the deformation of the tube schell at cylindrical tubes made of aluminium.

Packaging test; tubes made of aluminium; determination of the deformability of the tube body

DIN 55542-4:1990 包装试验.锥形管包装容量的测定.锥形管

This standard applies to conical tubes made from aluminium. It specifies rules of calculation and capacities.

Packaging test; determination of capacity for packages, conical tubes

ASTM F1307-90 用电量传感器测定固体包装件氧渗透率的试验方法

1.1 This test method covers a procedure for the determination of the steady-state rate of transmission of oxygen gas into packages. More specifically, the method is applicable to packages that in normal use will enclose a dry environment. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

ASTM D5094-90(2003) 加螺纹或有耳密封罩容器中液体总泄漏量的测试方法

1.1 These test methods cover the determination of gross leaks in rigid and semi-rigid containers (up to 4 L (1.06 gal)) with threaded or lug-style closures. Such tests may be used to indicate the ability of a liquid container to survive the distribution environment without leaking. These test methods may not be suitable to determine the leak resistance of containers intended for transport of hazardous materials.1.2 Test Methods:1.2.1 Test Method A, Shipping Container Vibration and Storage Test, covers the ability of a shipping container and its interior packaging to protect the contents from leakage after transportation induced vibration and high-temperature storage.1.2.2 Test Method B, Shipping Container Vibration and Vacuum Chamber Test, is suitable for individual containers and is usually less severe than Test Method A. The advantage of Test Method B is the shortness of the test.1.3 This standard does not purport to address the safety conserns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures

JIS Z 0301:1989 防湿包装方法

この規格は，吸湿性のない製品又は吸湿許容量が少ない製品を包装するときに，包装内容物を湿気の災害から保護するために，防混包装材料及び包装用乾操剤(以下，乾操剤という。)を用いて乾繰状態に保つ防湿包装方法について規定する。

Method of moisture-proof packaging

NF H34-020:1989 塑料包装.水果和蔬菜重复使用的平行六面体包装.规范和试验

Plastic packaging. Re-usable parallelepipedal packaging for fruit and vegetables. Specifications and tests.

ISO 8317:1989 防儿童拆开的包装 可再次包装的要求和试验程序

Child-resistant packaging; requirements and testing procedures for reclosable packages

BS EN 22206:1988 整包运输包装件.在试验时各部件的识别方法

Gives a system for identifying parts of sacks, bags, parallelepipedal, cylindrical and miscellaneous packages when testing.

Complete, filled transport packages - Method for identifying parts when testing

BS EN 28474:1987 满包运输包装件.耐浸水性能测定方法

Determination of the degree of protection offered to the contents. It is primarily intended for packages which have some degree of 'water-proofness'.

Complete, filled transport packages - Method for determination of resistance to immersion in water

BS EN 28768:1987 满包运输包装件.耐颠覆损坏性能测定方法

For packages which, because of their dimensions, may be exposed to a toppling hazard during transport and storage.

Complete, filled transport packages - Method for determination of resistance to damage by toppling

JIS Z 0203:1987 包装货物试验前的预处理

Conditioning of packaged freights for testing

BS 1133-12:1986 包装规程.第12节:防震方法(减震装置除外)

Most common methods, basic cushioning theory, cushion design, and materials generally used.

Packaging code - Methods of protection against shock (excluding cushioning devices)

BS EN 22248:1986 整包运输包装件.耐垂直跌落碰撞的性能测定方法

Method to assess the protection given to the contents.

Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping

BS EN 22874:1986 整包运输包装件.压缩试验机用堆放试验方法

Method to assess the strength of the package and the protection given to its contents.

Complete, filled transport packages - Method of test for stacking using compression tester

BS EN 22876:1986 整包运输包装件.耐滚动破坏的性能测定方法

Method for carrying out rolling tests on complete, filled packages either as a single test or as part of a series designed to measure the ability of a package to withstand a distribution system that includes a rolling hazard.

Complete, filled transport packages. Method for determination of resistance to damage by rolling

DIN 55457-2 Bb.1:1986 包装试验.聚烯烃容器.用压力温度法检验抗应力裂纹性能.第2 Bb 1部分:试验设备设计示例

Packaging test; containers made from polyolefins; stress cracking resistance, pressure-temperature method; examples for the design of test equipment

DIN 55543-1:1986 包装试验.塑料袋试验方法.薄膜厚度的测定

This standard describes the test method for the determination of the film thickness of plastic sacks. The thickness tolerances can be determined over the width and the lenght of the samples to be tested.

Packaging test; test methods for plastic sacks; determination of the film thickness

WJ/Z 204-1986 兵器气相防锈包装指南

VCI Packaging Guide for Weapons