B95 营林机械与机具 标准查询与下载

ISO 11680-1:2011 林业机械 动力杆式修枝锯的安全要求和试验 第1部分:侧挂式杆式修枝锯

This part of ISO 11680 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners having an integral combustion engine as their power unit and using a drive shaft to transmit power to a cutting attachment consisting of a saw chain or a reciprocating or circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This part of ISO 11680 deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instruction handbook), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE See Annex A for a list of significant hazards. This part of ISO 11680 is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication.

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine

ISO 11680-2:2011 林业机械 动力杆式修枝锯的安全要求和试验 第2部分:携背负式杆式修枝锯

This part of ISO 11680 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a back-pack power unit and using a drive shaft to transmit power to a cutting attachment consisting of a saw chain or reciprocating or circular saw blade (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This part of ISO 11680, together with the relevant sections of ISO 11680-1, deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instruction handbook) and whole-body vibration from the back-pack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is presently not available. NOTE 2 See Annex A for a list of significant hazards. This part of ISO 11680 is applicable to portable, hand-held, pole-mounted powered pruners with back-pack power unit manufactured after its date of publication.

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source

NF U34-140:2011 林业机械.便携式链锯.反弹试验

Forestry machinery - Portable chain-saws - Kickback test.

ISO 11681-2:2011 林业机械.便携式链锯的安全要求和试验.第2部分:修枝链锯

This part of ISO 11681 gives safety requirements and measures for their verification for the design and construction for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass — without guide bar or saw chain and with tanks empty — of 4,3 kg, intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator for pruning and dismantling standing tree crowns, and by persons having read and understood the safety requirements provided in the instruction handbook, using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This part of ISO 11681 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE See Annex B for a list of significant hazards. This part of ISO 11681 is applicable to chain-saws manufactured after its date of publication.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service

ISO 22867:2011 林业和园艺机械.使用内燃机的便携式手持机械振动测定规范.手把振动

This International Standard specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-enginepowered forest and garden machinery, including chain-saws (with the exception of high-handled chain-saws), brush-cutters, grass-trimmers, pole-mounted powered pruners, hedge-trimmers and garden-blowers. Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation.

Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles

ISO 11850:2011 林业机械基本安全性要求

Machinery for forestry - General safety requirements

NY/T 260-2011 剑麻加工机械制股机

本标准规定了剑麻加工机械制股机的术语和定义、型号规格、技术要求、试验方法、检验规则及标志和包装等要求。 本标准适用于将剑麻纱加工成股条的机械；其他采用天然纤维和合成纤维的纱线加工成股条的机械，也可参照使用。

Machinery for sisal hemp processing.Stranding machine

NY/T 340-2011 天然橡胶初加工机械洗涤机

本标准规定了天然橡胶初加工机械洗涤机的术语和定义、型号规格和主要技术参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求。 本标准适用于天然橡胶初加工机械洗涤机。

Machinery for primary processing of natural rubber.Scrap washer

NY/T 2092-2011 天然橡胶初加工机械 螺杆破碎机

本标准规定了天然橡胶初加工机械螺杆破碎机的产品型号规格、主要技术参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求。 本标准适用于天然橡胶初加工机械螺杆破碎机的设计制造及质量检验。

Machinery for primary processing of natural rubber. Screw crusher

NY/T 232-2011 天然橡胶初加工机械基础件

本标准规定了天然橡胶初加工机械辊筒、筛网、锤片的主要尺寸参数、结构型式、技术要求、试验方法、检验规则及标志、包装、运输和贮存要求。 本标准适用于天然橡胶初加工机械辊筒、筛网、锤片。

Machinery for primary processing of natural rubber.Basic parts

NY 2091-2011 木薯淀粉初加工机械. 安全技术要求

本标准规定了木薯淀粉初加工机械的有关术语和定义、以及在设计、制造、安装、维护和使用操作等方面的安全技术要求。 本标准适用于以鲜木薯和木薯干片为加工原料的木薯淀粉初加工机械，其他薯类淀粉初加工机械可参照使用。

Machinery for primary processing of cassava starch. Technical means for ensuring safety

ISO 11837:2011 林业机械.锯链节保护系统.试验方法与性能标准

Machinery for forestry - Saw chain shot guarding systems - Test method and performance criteria

DIN EN 60745-2-13:2011 手持式电动工具.安全性.第2-13部分:链锯的特殊要求(IEC 60745-2-13-2006,已修改 + A1-2009);德文版本EN 60745-2-13-2009 + A1-2010

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006, modified + A1:2009); German version EN 60745-2-13:2009 + A1:2010

LY/T 1041-2011 林业机械.苗圃筑床机

本标准规定了林业苗圃筑床机（以下简称筑床机）的术语和定义、产品型号及基本参数、技术要求、试验方法、检验规则、标志、包装、使用说明书、运输和贮存。 本标准适用于以拖拉机或苗圃通用底盘为动力的悬挂式连接的苗圃筑床机。

Forestry machinery.Seed bed former for nursery

LY/T 1988-2011 林业机械.背负式高射程喷雾喷粉机

本标准规定了背负式高射程喷雾喷粉机的术语和定义、型号编制方法、技术要求、试验方法、检验规则、标志、包装、使用说明书、运输和贮存。 本标准适用于配用汽油机驱动的离心式风机，且垂直射程达到18m以上的背负式高射程喷雾喷粉机。

Forestry machinery.Knapsack high-range sprayer-duster

LY/T 1346-2011 林业机械.便携式油锯.平衡和最大握持力矩的测定

本标准规定了以内燃机为动力的便携式手持油锯的纵向和横向平衡的试验方法。 本标准还规定了测定修枝油锯的最大握持力矩的试验方法。

Forestry machinery.Portable chain-swas.Determination of balance and maximum holding moment

LY/T 1166-2011 林业机械.便携式油锯护手器.机械强度

本标准规定了以内燃机为动力的便携式林用油锯前、后护手器的机械强度要求及试验方式。

Forestry machinery.Portable chain-saw hand-guards.Mechanical strength

DIN EN ISO 22868:2011 林业和园林机械.带内燃机的便携手持式机械的噪声试验规范.工程法(2级准确度)(ISO 22868-2011);德文版本EN ISO 22868-2011

This International Standard specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable hand-held, combustion engine powered forest machines such as chain saws, brush-cutters, grass trimmers, pole-mounted powered pruners, hedge trimmers and garden blowers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level.

Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011); German version EN ISO 22868:2011

DB23/T 1424-2011 退化草原牧草机械化补播技术规范

Technical specification for pasture mechanized reseeding in degraded grasslands

DIN EN ISO 11680-2 Berichtigung 1:2010 林业机械.杆式电动修枝机用安全性要求和试验.第2部分:可使用背负式电源的修枝机(ISO 11680-2-2000);德文版本EN ISO 11680-2-2008, DIN EN ISO 11680-2-2009-01的技术勘误

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000); German version EN ISO 11680-2:2008, Corrigendum to DIN EN ISO 11680-2:2009-01