C68 生产设备安全技术 标准查询与下载

DB3308/T 035-2017 特种设备安全主体责任落实及评价规范

Responsibility implementation and evaluation specification for special equipment safety subject

IEC 61511-1:2016/COR1:2016 功能安全. 加工工业部门用安全仪表化系统. 第1部分: 框架, 定义, 系统, 硬件和应用程序要求; 勘误表1

Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements; Corrigendum 1

IEC TS 60204-34:2016 机械的安全性. 机械的电气设备. 第34部分: 机床要求

This clause of IEC 60204-1 is applicable except as follows: Replacement: This part of IEC 60204 applies to electrical, electronic and programmable electronic equipment and systems of machine tools not portable by hand while working, including a group of machines working together in a co-ordinated manner. In this part of IEC 60204, machine tools means all machines for the working of metal, wood, plastics and stone, operating by forming or removal of material. The following list includes examples of machine tools but not limited to: Turning machines (i.e. manually controlled turning machines without numerical control, manually controlled turning machines with limited numerically controlled capability, numerically controlled turning machines and turning centres, single- or multi-spindle automatic turning machines); Milling machines(including boring machines); Machining centres; Planing machines; Drilling machines; Grinding machines; Laser processing machines; Electro Discharge Machines(EDM) (except their power circuit for discharge); Sawing machines for cold metal; Guillotine shears; Hydraulic press brakes; Mechanical (or hydraulic, pneumatic) presses. Power circuits where electrical energy is directly used as a working tool are excluded from this part of IEC 60204. In addition to this document, the applicable C-standard for the machines listed in the examples can be referred for more information.

Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools

BS EN ISO 14122-4:2016 机械安全 永久接触机器的方式 固定梯子

Safety of machinery. Permanent means of access to machinery. Fixed ladders

BS EN ISO 14122-1:2016 机械安全 永久接触机器的方式 固定方式的选择和访问的一般要求

Safety of machinery. Permanent means of access to machinery. Choice of fixed means and general requirements of access

BS EN ISO 14122-2:2016 机械安全 永久接触机器的方式 工作平台和走道

Safety of machinery. Permanent means of access to machinery. Working platforms and walkways

BS EN ISO 14122-3:2016 机械安全 永久接触机器的方式 楼梯、活梯和护栏

Safety of machinery. Permanent means of access to machinery. Stairs, stepladders and guard-rails

EN 71-5:2015 玩具的安全性.第5部分:实验装置以外的化学玩具(套)

This European Standard specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are: those classified as dangerous by the EU-legislation applying to dangerous substances and dangerous mixtures; substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and; any other chemical substance(s) and mixture(s) delivered with the chemical toy. NOTE The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008. Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information. This Part of EN 71 applies to: plaster of Paris (gypsum) moulding sets; oven-hardening plasticised PVC modelling clay sets; polystyrene granules sets; embedding sets; adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets.

Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

PD CEN/TR 15071:2015 玩具的安全性.EN71系列使用的警告和说明的国家翻译

Safety of toys - National translations of warnings and instructions for use in the EN 71 series

AQ 3053-2015 立式圆筒形钢制焊接储罐安全技术规程

本标准规定了立式圆筒形钢制焊接储罐的材料、设计、预制、施工和验收、防雷、防静电、防腐、使用管理、检验和安全附件各方面的基本安全要求。 本标准适用于设计压力小于0. 1 MPa(G)且公称容积大于或等于1000 m、建造在地面上、储存毒性程度为非极度或非高度危害的石油、石油产品或化工液体介质、现场组焊的立式圆筒形钢制焊接储罐。公称容积小于1000 m、储存其他类似液体介质的储罐，可参照本标准执行。 本标准适用的储罐，其范围包括储罐本体、安全附件和储罐接管的法兰盖、密封垫片及其紧固件。 本标准不适用于冷冻式低温储罐。

Safety technical code for vertical cylindrical steel welded tank

DB36/ 789-2014 钢制压力管道超声导波检测方法

Ultrasonic guided wave testing method for steel pressure pipelines

DB31/T 812-2014 低压用户电气装置安全检验规程

本标准规定了低压用户电气装置安全检验的基本要求、检验项目及其技术要求以及检验方法。 本标准适用于低压用户电气装置安全检验。 本标准不适用于危险场所电气防爆安全检测和防雷电气安全检测。

Safety inspection regulations for low-voltage consumer electrical installations

BS 8607:2014 机械操作式按钮锁具. 要求和试验方法

This British Standard specifies requirements and test methods for durability, strength and function of mechanically operated push-button Iocksets and their locking plates for use on doors,window doors and entrance doors in buildings. This British Standard includes requirements for Iocksets intended for use on fire-resisting and smoke control doors.It does not specify requirements for Iocksets intended for use on final exit doors on escape routes,which are covered in BS EN 179.

Mechanically operated push-button locksets. Requirements and test methods

ISO 18436-7:2014 机器的工况监测和诊断. 人员资格认定和评估要求. 第7部分: 温度记录

This part of ISO 18436 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using infrared thermography. A certificate or declaration of conformity to this part of ISO 18436 will provide recognition of the qualifications and competence of individuals to perform thermal measurements and analysis for machinery condition monitoring using portable thermal imaging equipment. This procedure might not apply to specialized equipment or other specific situations. This part of ISO 18436 specifies a three-category classification programme that is based on the technical areas delineated herein.

Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 7: Thermography

BS ISO 18436-6:2014 机器的工况监测和诊断. 人员的资格和评估要求. 声发射

Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Acoustic emission

AQ/T 4123-2014 烟花爆竹 烟火药火焰感度测定方法

本标准规定了烟火药火焰感度测定的材料和仪器、试验准备、试验步骤、发火与瞎火的判别、试验结果处理和火焰感度仪标定方法。本标准适用于烟花爆竹用烟火药火焰感度的测定。含烟火药效果件火焰感度可参照执行。

Method for testing pyrotechnics flame sensitivity for Fireworks

AQ 4125-2014 烟花爆竹 单基火药安全要求

本标准规定了烟花爆竹用退役单基火药的安全指标,检测方法,产品包装,验收规则,以及运输、贮存和使用安全要求。本标准适用于烟花爆竹用退役单基火药。

Safety requirements of single-base propellant for Fireworks

AQ/T 4124-2014 烟花爆竹 烟火药危险性分类定级方法

本标准规定了烟火药危险性的分类定级方法和烟火药危险性分类定级所用到的各种能量输入、输出参数测试方法。本标准适用于烟花爆竹用烟火药的危险性分类定级。

Hazard classification method of pyrotechnics for Fireworks

AQ/T 4122-2014 烟花爆竹 烟火药吸湿率测定方法

本标准规定了烟火药吸湿率测定的试剂、材料和仪器,试验准备,试验步骤,以及试验结果处理的要求。本标准适用于烟花爆竹用烟火药吸湿率的测定。

Method for testing pyrotechnics hygroscopicity for Fireworks

ISO 18436-4:2014 机器的工况监测和诊断. 人员的资格和评估要求. 第4部分: 现场润滑分析

This part of ISO 018436 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using field lubricant analysis. A_ certificate or declaration of conformity to this part of ISO 18436 will provide recognition of the qualifications and competence ofindividuals to perform fieldlubricant analysis for machinery condition monitoring. This procedure is not applicable to specialized equipment or other Specific situations. This partofISO 18436 specifies athree-category classification programmethatis based on thetechnical areas delineated herein，

Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 4: Field lubricant analysis