C69 防护设备的安全要求 标准查询与下载

EN ISO 14119:2013 机械安全 带有联锁装置的保护装置 设计和选择原则

Diese Internationale Norm legt Leitlinien fur die Gestaltung und Auswahl - unabhangig von der Energieart - von Verriegelungseinrichtungen in Verbindung mit trennenden Schutzeinrichtungen fest. Diese Internationale Norm behandelt Teile von trennenden Schutzeinrichtungen, die Verriegelungseinrichtungen betatigen. ANMERKUNG ISO 14120 legt allgemeine Anforderungen an die Gestaltung und die Konstruktion von trennenden Schutzeinrichtungen fest, die hauptsachlich dafur vorgesehen sind, Personen vor mechanischen Gefahrdungen zu schutzen. Die Verarbeitung des von der Verriegelungseinrichtung ausgehenden Signals zum Anhalten und Stillsetzen der Maschine wird in ISO 13849-1 oder IEC 62061 behandelt. Diese Internationale Norm enthalt nicht unbedingt alle spezifischen Anforderungen an Schlusseltransfersysteme. Diese Internationale Norm stellt Masnahmen bereit, um ein Umgehen von Verriegelungseinrichtungen auf eine vernunftigerweise vorhersehbare Art zu minimieren.

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection [Superseded: CEN EN 1088]

KS G ISO 16024:2010 高空防坠落用个人防护设备.柔性水平救生索系统

이 표준은 높은 곳에서의 추락 방지용 개인용 보호 장비 연결장치 전용으로 한번에 최대 3명

Personal protective equipment for protection against falls from a height－Flexible horizontal lifeline systems

NF E85-004/A1:2010 机械安全性.机械装置的永久性专用通道.第4部分:固定式梯子.修改件1

Safety of machinery - Permanent means of access to machinery - Part 4 : fixed ladders - Amendment 1.

EN 1265:1999+A1:2008 机械安全.铸造机械和设备的噪音测试规程

This noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission values of several groups of foundry machinery. It specifies noise measurement methods that are available and operating and mounting conditions that shall be used for the test. Noise emission values include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for: manufacturers to declare the noise emitted; comparing the noise emitted by machines in the group concerned; purposes of noise control at the source at the design stage. The use of this standard ensures the reproducibility of the determination of the noise emission values within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3). This standard has a main body giving general requirements common to the foundry machines family. Six normative Annexes give requirements specific to the groups of foundry machinery listed below: core making machines (EN 710); moulding machines (EN 710); knock-out grids and knock-out trays (EN 710); dry abrasive blasting equipment (not restricted to foundry application) (EN 1248); air blasting equipment (EN 1248); diecasting machines (EN 869); and six informative Annexes giving guidance for the definition of specific operating conditions. The main body of this standard also gives guidance for the measurement of the noise emission of foundry machines not dealt with in the Annexes. This standard does not cover the computation of personnel daily noise exposure.

Safety of machinery - Noise test code for foundry machines and equipment

EN ISO/TS 25377:2007 呼吸保护装置.人的因素.第1部分:代谢率和呼吸流速

Respiratory protective devices - Human factors - Part 1: Metabolic rates and respiratory flow rates

EN 14120:2003+A1:2007 防护服.轮滑运动装备的手腕,手掌,膝盖和肘部保护.要求和试验方法

This European Standard specifies the requirements and test methods for ergonomics, innocuousness, comfort, restraint, strength, abrasion, impact performance as well as provisions for marking and instructions supplied by the manufacturer for wrist, palm, knee and elbow protectors (hereinafter referred to as protectors) for all users of roller sports equipment. It does not apply to protectors used in roller sports hockey.

Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods

BS DD ISO/TS 4869-5:2006 声学.听力保护.与新的试验目标对应的噪声消减估算方法

This Technical Specification specifies a method for measuring noise reduction of passive hearing protectors at the threshold of hearing. The method is designed to provide estimates of the noise reduction obtained by typical groups of users in real-world occupational settings, who may lack the training and motivation to wear hearing protectors in an optimum manner. The principle of the test method is to measure the difference in hearing threshold with and without wearing a hearing protector. This difference between the thresholds constitutes the noise reduction. The measurement is done twice on a given number of test subjects. NOTE 1 The principle of measuring the influence of a hearing protector on the hearing threshold is used in ISO 4869-1 and in this Technical Specification. The method described in ISO 4869-1 yields the sound attenuation of the hearing protector under test. The result of the measurement is a pure physical characteristic of the hearing protector. The method described in this Technical Specification yields the performance of the system as a whole, i.e. the influence of hearing protector, test subjects, fitting and instruction. This test method yields data that are collected at low sound pressure levels (close to the threshold of hearing), but which are also representative of the noise reduction values of hearing protectors at higher sound pressure levels. This Technical Specification is inapplicable for level-dependent hearing protectors for sound pressure levels above the point at which their level-dependent characteristics become effective. NOTE 2 At frequencies below 500 Hz, real-ear noise reduction data measured according to this Technical Specification may be spuriously high by a few decibels, with the error increasing as the frequency decreases. The error results from masking of the occluded-ear threshold by physiological noise during testing.

Acoustics - Hearing protectors - Method for estimation of noise reduction using fitting by inexperienced test subjects

ISO 16024:2005 高空防坠落用个人防护设备.柔性水平救生索系统

This International Standard specifies design and performance requirements, test methods, user instructions, marking and labelling as appropriate, of flexible horizontal lifeline systems for use at any one time by up to three persons, exclusively for the attachment of personal protective equipment for protection against falls from a height. It does not stipulate designs for flexible horizontal lifelines, except for design limitations that are necessary for safe and durable service. This International Standard does not cover rigid rail systems, nor is it intended to cover flexible guardrails, hand lines and work-positioning anchor lines.

Personal protective equipment for protection against falls from a height - Flexible horizontal lifeline systems

WJ 2665-2005 车载三防方舱滤毒通风装置通用规范

General specifications for vehicle shelter NBC filtration and ventilation units

ANSI/IEEE 1307:2004 用于施工的防坠落设备的标准

Provides general recommendations for a fall protection program for substation and generation structures and equipment, communication [including Community Antenna Television (CATV)], transmission, and distribution structures.

Standard for Fall Protection for Utility Work

ASTM F2266-03 测试营救系统和部件附属人员和设备的标准规范

1.1 This specification defines the masses to be used when testing rescue systems and components.1.2 The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment.1.2.1 The masses chosen have been used in the past or are in current use in testing of rescue systems and components. Limiting testing to the masses listed in this specification allows meaningful comparisons between past, current, and future test results.1.3 The user of this specification shall determine which mass(es) represent(s) the personnel and equipment attached to the system or component under test.1.4 For the purposes of this specification, mass and weight are synonymous when the object(s) representing the mass(es) are weighed in air anywhere on Earth.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Masses Used in Testing Rescue Systems and Components

ASTM F2266-03(2008)e1 用于测试营救系统和组件的主体的标准规范

1.1 This specification defines the masses to be used when testing rescue systems and components. 1.2 The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment. 1.2.1 The masses chosen have been used in the past or are in current use in testing of rescue systems and components. Limiting testing to the masses listed in this specification allows meaningful comparisons between past, current, and future test results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 The user of this specification shall determine which mass(es) represent(s) the personnel and equipment attached to the system or component under test. 1.5 For the purposes of this specification, mass and weight are synonymous when the object(s) representing the mass(es) are weighed in air anywhere on Earth. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Masses Used in Testing Rescue Systems and Components

BS EN 1263-2:2002 安全网.定位极限的安全性要求

This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263-1. Small safety nets of system S according to EN 1263-1 (less than 35 m and 5,0 m on the shortest side) are not dealt with in this European Standard.

Safety nets - Safety requirements for the positioning limits

DIN IEC 61577-2:2001 辐射防护装置.氡和氡衰减产品测量装置.第2部分:氡测量装置的特殊要求

The document specifies the specific requirements for radon measuring instruments. It is based on the general requirements and test procedures given in Part 1.

Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for radon measuring instruments (IEC 61577-2:2000)

NF S71-513/A1:2000 高处坠落防护.锚固装置.要求和试验

Protection against falls from a height - Anchor devices - Requirements and testing.

DIN EN 1746:1998 机械的安全性.安全标准中噪音要求章节的起草指南

The document gives guidance on how to deal with noise in type C-standards where noise is identified as a significant hazard. As such, it supplements the rules given in EN 414.#,,#

Safety of machinery - Guidance for the drafting of the noise clauses of safety standards; German version EN 1746:1998

DIN EN 1891:1998 预防个人从高处坠落的保护设备.低延伸性芯套绳索

The document applies to low stretch textile ropes of kernmantel construction 8,5 mm to 16 mm diameter, for use by personnel in rope access including all kinds of work positioning and restraint; for rescue and in speleology. Two types of low stretch kernmantel ropes are defined: A and B. It specifies requirements, testing, marking and information to be supplied by the manufacturer including instructions for use of such low stretch kernmantel ropes.

Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes; German version EN 1891:1998

NF C20-013*NF EN 61032:1998 防护罩对人员和设备的保护.验证用探针

Protection of persons and equipment by enclosures. Probes for verification.

NF S71-501/A1:1997 NF EN 341-1993的修改件1

Personal protective equipment against falls from a height - Descender devices.

JC/T 530-1994 水泥工业用分室高压脉冲袋式除尘器

Chamber high pressure pulse bag filter for cement industry