C70 工业防尘防毒技术 标准查询与下载

BS EN 13890:2009 工作场所暴露.空气载粒子中金属和类金属物的测量规程.试验方法和要求

This European Standard specifies performance requirements and test methods for the evaluation of procedures for measuring metals and metalloids in airborne particles sampled onto a suitable collection substrate, e.g. a filter. This European Standard specifies a method for estimating the uncertainties associated with random and systematic errors and combining them to calculate the expanded uncertainty of the measuring procedure as a whole, as prescribed in EN 482. This European Standard is applicable to measuring procedures in which sampling and analysis is carried out in separate stages, but it does not specify performance requirements for collection, transport and storage of samples, since these are dealt with in EN 13205 and ISO 15767. This European Standard is not applicable to procedures for measuring metals or metalloids present as inorganic gases or vapours, e.g. mercury, arsenic (see EN 838 and EN 1076), or to procedures for measuring metals and metalloids in compounds that could be present as a particle/vapour mixture, e.g. arsenic trioxide.

Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods

BS ISO 15767:2009 工作场所大气.采集的气溶胶称重的控制和表征不确定性

Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols

ISO 8761:1989/cor 1:2009 工作场所空气.二氧化氮质量浓度的测定.直接显示的短期取样用检测管法.技术勘误表1

Work-place air - Determination of mass concentration of nitrogen dioxide - Method using detector tubes for short-term sampling with direct indication; Technical Corrigendum 1

ISO 8760:1990/cor 1:2009 工作场所的空气.一氧化碳质量浓度的测定.带直接指示的快速取样用检测管法.技术勘误表1

Work-place air - Determination of mass concentration of carbon monoxide - Method using detector tubes for short-term sampling with direct indication; Technical Corrigendum 1

ISO 15767:2009 工作场所空气.称重已收集大气悬浮物的控制与表征不确定度

Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols

SANS 6164:2009 以原子吸收光谱法测定工作场所空气中的铅(无机铅及四烷基铅)

Specifies the determination of lead (inorganic and tetra-alkyl) in the workplace air by atomic absorption spectrophotometry.

Determination of lead (inorganic and tetra-alkyl) in workplace air by atomic absorption spectrophotometry

ISO 17735:2009 工作场所空气.使用1-(9-蒽甲基)哌嗪(MAP)试剂和液相色谱法测定空气中总异氰酸酯基

Workplace atmospheres - Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography

ISO 29042-3:2009 机械的安全性.气载有害物质的排放评估.第3部分:给定污染物排放率的测量用试验工作台方法

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

ISO 29042-2:2009 机械的安全性.气载有害物质的排放评估.第2部分:给定污染物排放率的测量用探测气体方法

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

DIN EN 626-2 Berichtigung 1:2009 机械安全.机械排放的有害物质对健康危害的减少.第2部分:鉴定程序方法学.技术勘误DIN EN 626-2-2008

Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures; German version EN 626-2:1996+A1:2008, Corrigendum to DIN EN 626-2:2008-09

DIN EN 626-1 Berichtigung 1:2009 机械安全.机械排放的有害物质对健康危害的减少.第1部分:机械制造商用原则和规范.技术勘误DIN EN 626-1-2008

Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers; German version EN 626-1:1994+A1:2008, Corrigendum to DIN EN 626-1:2008-09

ISO 29042-4:2009 机械安全 气载有害物质排放的评估 第4部分 排放系统俘获效率的测量用示踪方法

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system

KS I ISO 16200-1:2008 工作场所空气质量.采用溶剂解吸作用/气相色谱法对挥发性有机化合物取样和分析.第1部分:注塑模具采样方法

1.1 이 표준에서는 펌프를 이용한 공기 중 휘발성 유기화합물(VOCs)의 샘플링 및 용매

Workplace air quality－Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography－Part 1：Pumped sampling method

KS I ISO 15202-2:2008 工作场所空气.用感应耦合等离子发射光谱法测定空气中悬浮颗粒物质中的金属和类金属物.第2部分:样品的制备

1.1 이 표준은 KS I ISO 15202-3에 기술된 방법을 이용하여 ICP-AES에

Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 2:Sample preparation

ISO 15011-4:2006/Amd 1:2008 焊接和相关工艺中的健康和安全.烟尘和气体取样用实验室方法.第4部分:烟尘数据单.修改件1

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets; Amendment 1

AQ 4204-2008 呼吸性粉尘个体采样器

本标准规定了呼吸性粉尘个体采样器的术语、技术要求、试验方法、检验规则，标识、包装和贮存。 本标准适用于个人佩带，能够连续8h采集呼吸性粉尘的采样器。

Personal sampler for respirable dust

AQ 4205-2008 矿山个体呼吸性粉尘测定方法

本标准规定了矿山个体呼吸性粉尘的测定方法。 本标准适用于矿山和选矿厂个体呼吸性粉尘浓度和粉尘中游离二氧化硅含量的测定。 本标准不适用于纤维性粉尘的测定。

Determination of personal respirable dust in mine

AQ 4203-2008 作业场所空气中呼吸性岩尘接触浓度管理标准

本标准适用于作业场所含游离二氧化硅的岩石粉尘的管理，不适用于纤维性矿尘和放射性矿尘的管理。

Administrative standards for personal exposure concentration of respirable rock dust in the air of workplace

AQ 4202-2008 作业场所空气中呼吸性煤尘接触浓度管理标准

本标准适用于作业场所空气中游离二氧化硅含量少于5%的煤尘的管理。

Administrative standard for personal exposure concentration of respirable coal dust in the air of workplace

AQ 4201-2008 电子工业防尘防毒技术规范

本标准规定了电子工业企业防尘防毒的技术要求、措施和管理。 本标准适用于电子工业企业生产过程中粉尘、毒物危害的工程技术和管理防范，也适用于安全生产和职业病危害监督管理部门对电子工业企业生产过程中粉尘、毒物危害的监督。

Technology code of dust and poison control for electronic industry