C75 劳动保护管理综合 标准查询与下载

MH/T 7019-2013 民用航空人员体检鉴定场所和设施设备配备规范

本标准规定了民用航空人员体检鉴定机构(以下简称体检机构)进行民用航空人员体检鉴定工作的场所和设备的要求。本标准适用于各体检机构。

Specification of site and equipments for medical examination agency and station for civil aviation personnel

MH/T 7018-2013 民用航空器事故调查员安全防护规范

本标准规定了民用航空器事故调查员(以下简称调查员)参与事故调查时采取的安全防护措施。本标准适用于民用航空器事故、事故征候及其他不安全事件调查。

Specification of safety precautions for investigator in civil aircraft accident

ANSI/NFPA 1026-2013 事故管理人员专业认证标准

Standard for Incident Management Personnel Professional Qualifications

DB12/T 465-2012 预防性健康检查 粪便中沙门氏菌、志贺氏菌的检测方法

本标准适用于疾病预防控制机构和医疗机构对食品、公共场所等行业从业人员，进行沙门氏菌和志贺氏菌健康带菌者的检测和确认。

Detection method of Salmonella and Shigella in feces in preventive health examination

DB46/ 218-2012 起重机械维修保养规范

适用于海南省行政区域内桥式起重机、门式起重机、门座式起重机、塔式起重机、施工升降机、旋臂式起重机、机械式停车设备和电动葫芦的维修保养服务

Lifting Machinery Maintenance Specifications

AQ 5210-2011 建筑涂装安全通则

本标准规定了建筑涂装作业安全的基本要求，包括建筑涂装施工要求、作业场所（部位）安全条件、涂料及化学品、危险告知、健康监护、培训、应急措施等。对建筑涂装从业人员职业健康安全接本技能及见注涂装作业危害辨识等作出了具体规定。 本标准适用于新建、扩建及既有建筑内外墙面、梁柱、顶面、地面及建筑物内的家具、门窗、饰物及其他配套件的涂料施工，也适用于防水涂层及防腐涂层作业。装饰装修的其他分部工程可参照执行。

General safety code for building surface coating application

DB23/ 1396.2-2010 机械制造业安全生产规范 安全技术基本要求

Basic Requirements for Safety Production Standards and Safety Technology in Machinery Manufacturing Industry

DB23/ 1396.1-2010 机械制造业安全生产规范 安全管理基本要求

Basic Requirements for Safety Production Standards and Safety Management in Machinery Manufacturing Industry

KS P ISO TS 22367:2009 医学实验室.通过风险管理和连续改进减少过失

이 기술표준은 검사실 의료주기의 검사측면, 특히 검사 전 및 검사 후 측면과 관련하여 위험

Medical laboratories-Reduction of error through risk management and continual improvement

LD/T 107-2008 劳动能力鉴定 职工工伤与职业病致残等级代码

Labor Ability Appraisal Workers' Work-related Injury and Occupational Disease Disability Grade Codes

ASTM E2693-09 在湿金属切削环境中防止皮炎的标准规程

Use of this practice is intended to reduce occupational dermatitis caused by exposure to the wet metal removal environment. Complaints of dermatitis conditions are often associated with exposures to metal removal fluid. Implementation of this practice and incorporation of metal removal fluid management program has the potential to reduce complaints of occupational dermatitis. Elements of an effective program include: understanding dermatitis and associated causes; prevention of dermatitis and exposure to metal removal fluids; appropriate product selection; good management of additives, microorganisms, and fluids; appropriate additive (including antimicrobial pesticides) selection and additive control; appropriate tool design and assessment and control of metal removal fluid exposures including aerosols.1.1 This practice sets forth guidelines for reducing dermatitis caused by exposure to the wet metal removal environment. The scope of this practice does not include exposure to chemicals that enter the body through intact skin (cutaneous route), which has the potential to cause other toxic effects. 1.2 This practice incorporates means and mechanisms to reduce dermal exposure to the wet metal removal environment and to control factors in the wet metal removal environment that have the potential to cause dermatitis. 1.3 This practice focuses on employee exposure to the skin via contact and exposure to metal removal fluid (MRF). 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

BS DD CEN ISO/TS 22367:2008 医学实验室.通过风险管理和连续改进减少误差

Medical laboratories - Reduction of error through risk management and continual improvement

ARP 22399-2008 社会安全.事故预防和事故持续性管理指南

Provides general guidance for an organization - private, governmental, and non-governmental organizations - to develop its own specific performance criteria for incident preparedness and operational continuity, and to design an appropriate management sys

Societal security - Guideline for incident preparedness and operational continuity management

GA/T 769-2008 道路交通事故受伤人员救治项目评定规范

本标准规定了道路交通事故受伤人员（以下简称受伤人员）救治项目评定的原则、方法和内容。 本标准适用于受伤人员实施救治项目的必要性、合理性的评定。其他原因受伤人员可参照执行。

The criterion for assessment of medical treatment of the injured in road traffic accident

ISO/TS 22367:2008 医学实验室.通过风险管理和连续改进减少过失

ISO/TS 22367:2008 characterizes the application of ISO 15189 as a system for reducing laboratory error and improving patient safety by applying the principles of risk management, with reference to examination aspects, especially to pre- and post-examination aspects, of the cycle of laboratory medical care. ISO/TS 22367:2008 proposes a methodology for finding and characterizing medical laboratory error that would be avoided with the application of ISO 15189.

Medical laboratories - Reduction of error through risk management and continual improvement

ASTM F1127-07 紧急事件处理人员对危险材料泄露采取的应对策略的标准指南

This guide contains information regarding the containment of a hazardous material that has escaped from its container. If a material can be contained, the impact on the environment and the threat it poses to responders and the general public is usually reduced. The techniques described in this guide are among those that may be used by emergency responders to lessen the impact of a discharge. Emergency responders might include police, fire service personnel, government spill response personnel, industrial response personnel, or spill response contractors. In order to apply any of the techniques described in this guide, appropriate training is recommended.1.1 This guide describes methods to contain the spread of hazardous materials that have been discharged into the environment. It is directed toward those emergency response personnel who have had adequate hazardous material response training.

Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel

BS 8800:2004 职业健康和安全管理系统.指南

This guide is intended to help those with responsibility for ensuring OH&S issues are managed effectively to develop and maintain their own system. This British Standard gives guidance on: a) the design and implementation of OH&S management systems; b) the evaluation of effective OH&S management with a view to continual improvement; c) the relationships to and integration of an OH&S management system with other management systems standards. This guide is intended for use by organizations of all sizes and regardless of the nature of their activities. It is intended that its application is proportional to the circumstances and needs of the particular organization.

Occupational health and safety management systems - Guide

DB42/ 059-2002 普通防护鞋安全要求

本标准规定了普通防护鞋的分类、安全技术条件、试验规则、包装、标志和运输、贮存。本标准适用于以皮革或帆布制作的用于防尘、脏污及一般机械伤害的防护鞋。

Safety requirements for general protective shoes

ASTM F1127-01(2007) 紧急事件处理人员对危险材料泄露采取的应对策略的标准指南

1.1 This guide describes methods to contain the spread of hazardous materials that have been discharged into the environment. It is directed toward those emergency response personnel who have had adequate hazardous material response training.

Standard Guide for Containment by Emergency Response Personnel of Hazardous Material Spills

BS 8444-3:1996 风险管理 技术系统风险分析指南

This section of IEC 300-3 provides guidelines for selecting and implementing risk analysis techniques, primarily for risk assessment of technological systems. The objective of this standard is to ensure quality and consistency in the planning and execution of risk analyses and the presentation of results and conclusions. This standard contains guidelines for risk analysis, presented as follows: risk analysis concepts, risk analysis process, risk analysis methods. This section of IEC 300-3 is applicable as: - a guideline for planning, executing and documenting risk analyses; - a basis for specifying quality requirements for risk analysis (this can be particularly important when dealing with external consultants); - a basis for evaluating risk analyses after completion. Risk analysis carried out to this standard provides an input to risk management activities (see figure 1). NOTE - This standard does not provide specific criteria for identifying the need for risk analysis, or specify the type of risk analysis method that is required for a given situation. Nor does it offer detailed guidelines for specific hazards or include insurance, actuarial, legal, or financial interests.

Risk management. Guide to risk analysis of technological systems