C80 消防综合 标准查询与下载

DB34/T 3221-2018 火灾高危单位消防安全评估规程

本标准规定了火灾高危单位消防安全评估的术语和定义、评估内容、评估程序、判定标准及评估报 告。 本标准适用于消防安全评估机构对火灾高危单位消防安全体系及运行情况的评估及火灾高危单位 的消防安全自我评估。 其他消防安全重点单位可参照执行。

Fire safety assessment procedures for high-fire risk units

DB42/T 348-2018 线型光纤光栅感温火灾报警系统设计、施工及验收规范

Specifications for design, construction and acceptance of linear fiber grating temperature sensing fire alarm system

DIN EN 1366-11:2018 服务设施的防火试验.第11部分:电缆系统及其相关部件的防火系统;德文版本EN 1366-11-2018

This European Standard describes the method to evaluate the performance of protective systems for electrical cable and busbar systems in order to maintain the circuit integrity under fire conditions to classify the protective system according to EN 13501-3 for the P classification. The test examines the behaviour of cable protection systems exposed to fire from outside. The tests specified in this standard are not aimed for assessing the performance of the fire protective system and the penetration seal for maintaining the requirements of the penetrated wall or ceiling (classification E / I). This method is very different to EN 50200 for the PH classification and also to IEC 60331-11, IEC 60331-21, IEC 60331-23, and IEC 60331-25, which are not designed for fire protective systems for electrical cable systems. This standard should be used in conjunction with EN 1363-1. The test results apply to fire protective systems for electrical cable systems rated for voltages up to 1 kV. The test procedure should also be used to determine the performance of protective systems for use with data and optical cables, however, verification procedures for such cables are still under development. Proposals are given in Annex C. The protective system may include ventilation devices, inspection hatches, fixed or removable lids etc. The tests specified in this standard are not aimed for assessing the performance of sprayed or painted coatings (e. g. intumescent or ablative coating, plastic film, epoxy resin) and similar protective layers (e. g. wrap, bandage) applied directly on the cables or bus bars as fire protective system. Also, cables and bus bars with intrinsic resistance to fire, and without fire protective systems around, are excluded (see CENELEC standard EN 50577). This test method is not applicable for cabinets for electrical accessory containing bus systems, relays or similar.

Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components; German version EN 1366-11:2018

BS ISO 19703:2018 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算

Generation and analysis of toxic gases in fire. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires

ISO 19703:2018 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算

This document provides definitions and equations for the calculation of toxic product yields and the fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency. Sample calculations for practical cases are provided. The methods are intended to be used to produce either instantaneous or averaged values for those experimental fires in which time-resolved data are available. This document is intended to provide guidance to fire researchers for — recording appropriate experimental fire data, — calculating average yields of gases and smoke in fire effluents in fire tests and fire-like combustion in reduced scale apparatus, — characterizing burning behaviour in experimental fires in terms of equivalence ratio and combustion efficiency using oxygen consumption and product generation data. This document does not provide guidance on the operating procedure of any particular piece of apparatus or interpretation of data obtained therein (e.g. toxicological significance of results).

Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires

ISO 7240-7:2018 火灾探测和报警系统.第7部分:使用散射光,透射光或电离作用的尖形烟雾探测器

This document specifies requirements, test methods and performance criteria for point-type smoke detectors that operate using scattered light, transmitted light or ionization, for use in fire detection and alarm systems installed in buildings (see ISO 7240-1). This document also covers point-type smoke detectors that incorporate more than one smoke sensor operating on these principles. Additional requirements and test methods for such detectors are given in Annex N. For the testing of other types of smoke detectors, or smoke detectors working on different principles, this document is only intended to be used for guidance. This document is not applicable to smoke detectors with special characteristics, developed for specific risks. NOTE Certain types of detectors contain radioactive materials.

Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

JIS C 60695-10-2:2018 火灾测试.第10-2部分:异常热度.球压试验方法

Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test method

GA/T 1465-2018 消防产品市场准入信息管理

Fire protection product market access information management

GA/T 1463-2018 文物建筑消防安全管理

Cultural Heritage Building Fire Safety Management

GA/T 1464-2018 火灾调查职业危害安全防护规程

Fire investigation occupational hazard safety protection regulations

DIN EN ISO 13943:2018 防火安全.词汇(ISO 13943-2017);德文和英文版本EN ISO 13943-2017

This International Standard defines terminology relating to fire safety as used in ISO and IEC fire standards. Over the last two decades, there has been significant growth in the field of fire safety. There has been a considerable development of fire safety engineering design, especially as it relates to construction projects, as well as the development of concepts related to performance-based design. With this continuing evolution, there is an increasing need for agreement on a common language in the broad and expanding area of fire safety, beyond what traditionally has been limited to the field of fire testing.

Fire safety - Vocabulary (ISO 13943:2017); German and English version EN ISO 13943:2017

DB11/T 1483-2017 小型消防站建设规范

Specifications for the construction of small fire stations

BS EN ISO 13943:2017 消防安全 词汇

Fire safety. Vocabulary

GA/T 1427-2017 建筑火灾荷载调查与统计分析方法

Investigation and Statistical Analysis Method of Building Fire Load

DIN EN 60695-8-1:2017 火灾测试.第8-1部分:热释放.通用指南(IEC 60695-8-1-2016);德文版本EN 60695-8-1-2017

This part of IEC 60695 provides guidance in the assessment of heat release from electrotechnical products.

Fire hazard testing - Part 8-1: Heat release - General guidance (IEC 60695-8-1:2016); German version EN 60695-8-1:2017

DB32/T 3293-2017 企业专职消防队建设和管理规范

本标准规定了企业专职消防队的术语和定义、分类与设置、选址、设施、装备配备、人员配备、执勤训练管理。 本标准适用于企业专职消防队的建设和管理。

Specifications for the construction and management of full-time fire brigades in enterprises

DIN EN 1366-10:2017 服务设施的防火试验.第10部分:排烟防火阀;德文版本EN 1366-10-2011+A1-2017

Fire resistance tests for service installations - Part 10: Smoke control dampers; German version EN 1366-10:2011+A1:2017

DB45/T 1553-2017 电动自行车停放充电场所消防安全规范

Fire safety regulations for parking and charging places for electric bicycles

DIN EN 60695-10-3:2017 着火试验.第10-3部分:不正常热.模型应力释放扭变试验(IEC 60695-10-3-2016);德文版本EN 60695-10-3-2016

Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test (IEC 60695-10-3:2016); German version EN 60695-10-3:2016

ISO 3008-2:2017 耐火试验. 第2部分: 电梯门组件

This document specifies the method of test for determining the fire-resistance of lift landing door assemblies which can be exposed to a fire from the landing side. The procedure is applicable to all types of lift landing door assemblies used as a means of access to lifts in buildings and which are intended to provide a fire barrier to the spread of fire via the lift well. The procedure allows for the measurement of integrity and, if required, the measurement of radiation and thermal insulation. No requirements other than the verification that the specimen is operational are included for the mechanical conditioning before the test.

Fire-resistance tests - Part 2: Lift landing door assemblies