C81 火警监视、报警与消防调度系统 标准查询与下载

NF S61-983/A1:2002 火灾探测和火警系统.第3部分:火警设备.发声器

Fire detection and fire alarm systems - Part 3 : fire alarm devices - Sounders.

NF S62-303:2002 烟雾和热气控制系统.第3部分:烟雾和热气排气口用电动通风机规范

Smoke and heat control systems - Part 3 : specification for powered smoke and heat exhaust ventilators.

DIN EN 54-5/A1:2002 火灾探测和火灾报警系统.第5部分:热度探测器.定位探测器.修改件 A1; 德文版本 EN 54-5:2000/A1:2002

With the amendment A1 the relationship to the EU Construction Products Directive 89/106/EEC is given. The requirements to the performance characteristics and test methods as specified in DIN EN 54-5:2001 are unchanged. The product standard specifies the requirements for sounders which are used in fire detection and fire alarm systems. The requirements for the design and use of sounders according to DIN EN 54-3 for operation of fire detection and fire alarm systems in buildings are specified in the National Standards DIN 14675 and DIN VDE 0833-2 (VDE 0833 Part 2).

Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; Amendment A1; German version EN 54-5:2000/A1:2002

EN 54-5:2000/A1:2002 火灾探测和火灾报警系统.第5部分: 热探测器;着火位置探测器;修正A1

Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; Amendment A1

GA 384.2-2002 火警受理设备 第2部分：火警终端台

本标准规定了火警终端台的产品分类、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输、贮存。 本标准适用于公安消防部队及油田、工矿、石化、民航等企业消防部门使用的火警终端台。

Fire alarm receiving and dispatching equipment - Part 2:Fire alarm terminal console

GA 384.1-2002 火警受理设备 第1部分：火警受理台

本标准规定了火警受理台的产品分类、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 标准适用于公安消防部队及油田、工矿、石化、民航等企业消防部门使用的火警受理台。

Fire alarm receiving and dispatching equipment - Part 1:Fire alarm receiving and dispatching console

DIN EN 54-10:2002 火灾探测和火灾报警系统.第10部分:火焰探测器.火警点探测器; 德文版本 EN 54-10:2002

Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors; German version EN 54-10:2002

SANS 50054-11:2001 火警探测和火灾报警系统．第11部分：手动报警点

Specifies requirements and methods of test for manual call points in fire detection and fire alarm systens in and around buildings. Takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for direct operat

Fire detection and fire alarm systems Part 11: Manual call points

SANS 50054-3:2001 火灾探测及火警系统.第3部分:火灾报警设备-探测仪

Specifies requirements, test methods and performance criteria for fire alarm sounders in a fixed installation intended to signal an audible warning of fire between a fire detection and fire alarm system and the occupants of a building. Specifies fire ala

Fire detection and fire alarm systems Part 3: Fire alarm devices - Sounders

BS DD 245:2002 假警报管理的实施规程

Code of practice for management of false alarms

BS EN 54-10:2002 火灾探测和火灾警报系统.火焰探测器.着火位置探测器

This European Standard specifies requirements, test methods and performance criteria for point-type, resettable flame detectors that operate using radiation from a flame for use in fire detection systems installed in buildings. This standard does not cover flame detectors working on different principles from those described in this standard (although the standard may be used as guidance in assessing such products).

Fire detection and fire alarm systems - Flame detectors - Point detectors

UL 864 BULLETINS-2002 火灾警报系统用控制装置和附件

Propoals for ANSI/UL 864 to revise (1) exception to 55.2.1 to change the retard-reset-restart period duration, (2) 49.3 to indicate that ground-fault annunciation is not required where normal operation is not affected by a single ground-fault and Figure 49.1 editorially, and (3) revise NAC compatibility requirements in Sections 61.2 and 90.

Control Units and Accessories for Fire Alarm Systems

AS 3786:1993/AMD 3:2001 AS 3786-1993烟雾报警器的3号修改件

This Amendment applies to the Clauses 1.2, 1.5, 2.2.1, 2.2.2, 2.3.7, 2.13, 3.2, 4.1(g), and Table 5.1.

Amendment No. 3 to AS 3786—1993 Smoke alarms

SANS 50054-5:2000 火灾探测及火警系统.第5部分:热探测器-点探测器

Specifies the requirements, test methods and performance criteria for point heat detectors for use in fire detection and fire alarm systems for buildings.

Fire detection and fire alarm systems Part 5: Heat detectors - Point detectors

SANS 50054-7:2000 火灾探测及火警系统.第7部分:烟气探测器-使用散射光、透射光或电离的点探测器

Specifies requirements, test methods and performance criteria for point smoke detectors that operate using scattered light, transmitted light or ionization, for use in fire detection and fire alarm systems for buildings.

Fire detection and fire alarm systems Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization

DIN EN 54-11:2001 火灾探测和报警系统.第11部分:手动呼叫点

The document specifies the requirements and methods of test for manual call points in fire detection and fire alarm systems in and around buildings. It takes into account indoor and outdoor conditions," the appearance and operation of the manual call points for type A ""direct operation"" and type B ""indirect operation"" and covers those which are simple mechanical switches", those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control panels for signalling and identifying, for example, an address or location. It does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions.

Fire detection and fire alarm systems - Part 11: Manual call points; German version EN 54-11:2001

HB 10199-2001 火警预报.管理指南

Fire Precautions - A guide for management

DIN 14661:2001 消防设备.消防队用火灾探测和报警系统控制面板

The document specifies the requirements for fire brigade panels and gives principles for its conformity testing, marking, installation, inspection, operation and maintenance. The fire brigade panels serve to the connection of fire detection and fire alarm systems to the control and indicating equipment according to DIN 14675 which are connected to an automatic fire protection equipment for the automatic call of the fire brigade.

Firefighting equipment - Fire-brigade control panel for fire detection and fire alarm systems

BS EN 54-11:2001 火灾探测和火灾警报系统.手摇呼叫地点

This European Standard specifies the requirements and methods of test for manual call points in fire detection and fire alarm systems in and around buildings. It takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A "direct operation" and type B "indirect operation" and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control panels for signalling and identifying, for example, an address or location. This European Standard does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests than those given in this standard.

Fire detection and fire alarm systems - Manual call points

BS EN 54-3:2001 火灾探测和火灾警报系统.火灾警报系统.发声器

This European Standard specifies the requirements, test methods and performance criteria for fire alarm sounders in a fixed installation intended to signal an audible warning of fire between a fire detection and fire alarm system and the occupants of a building. It is intended to cover only those devices which derive their operating power by means of a physical electrical connection to an external source such as a fire alarm system. This standard specifies fire alarm sounders for two types of application environment, type A for indoor use and type B for outdoor use. This standard is not intended to cover: a) loudspeaker type devices primarily intended for emitting emergency voice messages; b) supervisory sounders, for example, within the control and indicating equipment.

Fire detection and fire alarm systems - Fire alarm devices - Sounders