D20 固体燃料矿综合 标准查询与下载

DB11/T 097-2019 低硫煤及制品环保技术要求

Environmental technical requirements for low-sulfur coal and its products

DB11/T 1322.27-2018 安全生产等级评定技术规范 第27部分：煤矿

Part 27 of the Technical Specifications for the Evaluation of Safety Production Grades: Coal Mine

NB/T 10052-2018 煤矿矿井水净化处理超磁分离工艺操作指南

Coal Mine Water Purification Treatment Ultramagnetic Separation Process Operation Guide

DZ/T 0315-2018 煤炭行业绿色矿山建设规范

Coal Industry Green Mine Construction Specifications

DB52/T 1212-2017 煤矿地面在用瓦斯泵及瓦斯泵站安全检验规范

Code for safety inspection of coal mine ground gas pumps and gas pumping stations

DB52/T 1213-2017 煤矿在用光干涉式甲烷测定器安全检查规范

Code for safety inspection of in-use optical interferometric methane detectors in coal mines

BS EN ISO 18125:2017 固体生物燃料.发热量的测定

Solid biofuels. Determination of calorific value

BS EN ISO 14780:2017 固体生物燃料.样品制备

Solid biofuels. Sample preparation

BS EN ISO 19743:2017 固体生物燃料. 超过3,15 mm重型异物含量的测定

Solid biofuels. Determination of content of heavy extraneous materials larger than 3,15 mm

BS EN ISO 18135:2017 固体生物燃料.取样

Solid Biofuels. Sampling

DIN EN ISO 18134-2:2017 固体生物燃料.水分含量的测定.烘干法.第2部分:总水分.简化方法.(ISO 18134-2-2017); 德文版本EN ISO 18134-2-2017

Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017); German version EN ISO 18134-2:2017

ISO 18135:2017 固体生物燃料.取样

Solid Biofuels - Sampling

ISO 19743:2017 固体生物燃料. 超过3,15 mm重型异物含量的测定

This document specifies a method for the determination of content of heavy extraneous materials larger than 3,15 mm by the use of sink-and-float separation combined with elutriation. This document is applicable to woody biomass in accordance with ISO 17225-1:2014, Table 1. NOTE 1 This method is designed to determine the level of impurities larger than 3,15 mm top size with a specific density >1 g/cm3 such as stones, glass, rubber, metal and certain types of plastics. NOTE 2 During the processing of the sample, hand sorting of light impurities with a specific density ≤1 g/cm3 (e.g. plastic foil) can also be done.

Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm

BS EN ISO 18134-2:2017 固体生物燃料 水分含量的测定 烘干法 总水分 简化方法

Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Simplified method

ISO 18134-2:2017 固体生物燃料. 水分含量的测定. 烘干法. 第2部分: 总水分. 简化方法

Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method

ASTM D6316-17 测定煤和焦炭的固体残留物中总的, 可燃烧的和碳化碳的标准试验方法

5.1 The combustible carbon content of solid residues is used to calculate efficiency of fuel combustion in boiler furnaces and similar combustors. 5.2 Combustible carbon values are also used to determine the residual fuel value of incompletely combusted/reacted coal and coke in other reactors that consume carbonaceous fuels (examples include fluidized bed furnaces and liquefaction, gasification and pyrolysis reactors). 5.3 The combustible carbon content of flyash is an important parameter in the use of flyash as a cement additive. 1.1 This test method covers the determination of total, combustible, and carbonate carbon remaining in the solid byproducts of combustion from boiler furnaces and similar reactors, including ash, flyash, char, slag, and similar materials. 1.2 This test method is intended for the use of industry to determine the performance of boiler furnaces and similar combustion reactors and aid in determining the quality of the solid residue from combustion. 1.3 This test method comprises the use of any of several methods to determine total carbon content combined with any of several methods to determine carbonate carbon, and the calculation, by difference, of the combustible carbon remaining in a sample. 1.4 Alternatively, this test method applies to the determination of total carbon remaining in a material after acidification with strong acid to evolve carbonate carbon. In this case, the combustible carbon is the total carbon measured in the sample after acidification. 1.5 The values stated in SI units are to be regarded as standard. Non-SI units, if provided, are for information only and are contained within parentheses. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

ASTM D388-17 煤分级的标准分类

4.1 This classification establishes categories of coal based on gradational properties that depend principally on the degree of metamorphism to which the coal was subjected while buried. These categories indicate ranges of physical and chemical characteristics that are useful in making broad estimates of the behavior of coal in mining, preparation, and use. 1.1 This standard covers the classification of coals by rank, that is, according to their degree of metamorphism, or progressive alteration, in the natural series from lignite to anthracite. 1.2 This classification is applicable to coals that are composed mainly of vitrinite. Note 1: Coals rich in inertinite or liptinite (exinite), or both, cannot be properly classified because, in those macerals, the properties that determine rank (calorific value, volatile matter, and agglomerating character) differ greatly from those of vitrinite in the same coal. Often such coals can be recognized by megascopic examination. In North America, these coals are mostly nonbanded varieties that contain only a small proportion of vitrain and consist mainly of attrital materials. The degree of metamorphism of nonbanded and other vitrinite-poor coals can be estimated by determining the classification properties of isolated or concentrated vitrinite fractions, or by determining the reflectance of the vitrinite (see Test Method D2798 and Appendix X1 of this classification). However, in the use of these vitrinite-poor coals, some properties normally associated with rank, such as rheology, combustibility, hardness, and grindability (as well as the rank determining properties) may differ substantially from those of vitrinite-rich coals of the same degree of metamorphism. The precision of the classification of impure coal may be impaired by the effect of large amounts of mineral matter on the determination of volatile matter and calorific value, and on their calculation to the mineral-matter-free basis. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. The values given in parentheses are for information only. 1.3.1 Exception—The values stated in British thermal units per pound (Btu/lb) are to be regarded as the standard. The SI equivalents of Btu/lb are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification of Coals by Rank

BS ISO 11724:2016 固体矿物燃料. 煤, 焦炭和飞灰总氟含量的测定

Solid mineral fuels. Determination of total fluorine in coal, coke and fly ash

BS ISO 1213-2:2016 固体矿物燃料.术语.采样、试验和分析有关术语

Solid mineral fuels. Vocabulary. Terms relating to sampling, testing and analysis

ISO 1213-2:2016 固体矿物燃料. 词汇. 第2部分: 取样, 测试和分析相关术语

Solid mineral fuels - Vocabulary - Part 2: Terms relating to sampling, testing and analysis