D32 锰矿 标准查询与下载

KS E ISO 6230:2003 锰矿石.用筛分法测定粒度分配

이 규격은 자연적 또는 가공 처리된(펠릿, 소성체 및 덩어리형의 광석) 망간 광석의 체

Manganese ores－Determination of size distribution by sieving

KS E ISO 8530:2003 锰矿石和铬矿石.检验试样组成部分精度的实验方法

이 규격은 관련 규격에 설명되어 있는 방법으로 자연적 또는 처리를 가한 망간 및 크롬

Manganese and chromium ores-Experimental methods for checking the precision of sample division

KS E ISO 4296-1:2003 锰矿石.取样.第1部分:增量取样

이 규격은 운송 위치에서 사용될 망간 광석의 샘플 채취를 위한 방법 및 탁송품의 화학

Manganese ores－Sampling－Part 1：Increment sampling

KS E ISO 4299:2003 锰矿石.含水量的测定

이 규격은 정광, 펠릿 및 덩어리를 포함한 자연적 또는 가공 처리된 망간 광석 탁송품(

Manganese ores－Determination of moisture content

KS E ISO 4296-2:2003 锰矿石.取样.第2部分:试样的制备

이 규격은 탁송품의 화학 조성 및 수분 함량을 결정하기 위한 망간 광석의 샘플 준비 방

Manganese ores－Sampling－Part 2：Preparation of samples

KS E ISO 8531:2003 锰矿石和铬矿石.检验水分测定精度的实验方法

이 규격은 관련 규격에 설명되어 있는 방법에 따라 자연적 또는 처리를 가한 망간 및 크

Manganese and chromium ores－Experimental methods for checking the precision of moisture determination

KS E ISO 8542:2003 锰矿石和铬矿石.质量变化评定的实验方法和检验取样精度的方法

이 규격은 관련 규격에 설명되어 있는 질량 기준 체계적 방법 및 두 단계법을 사용한 샘

Manganese and chromium ores－Experimental methods for evaluation of quality variation and methods for checking the precision of sampling

KS E ISO 8541:2003 锰矿石和铬矿石.检验取样偏差和试样制备的实验方法

이 규격은 관련 규격에 설명되어 있는 방법에 따라 자연적 또는 처리를 가한 망간 및 크

Manganese and chromium ores－Experimental methods for checking the bias of sampling and sample preparation

KS E ISO 7990:2002 锰矿石和锰精矿.铁的总含量的测定.还原后的滴定法和磺基水杨酸分光光度计法

이 규격은 망가니즈 광석과 정광에 대한 총 철의 함유량을 분석하기 위한 두 가지 방법에

Manganese ores and concentrates－Determination of total iron content－Titrimetric method after reduction and sulfosalicylic acid spectrophotometric method

KS E ISO 9681:2002 锰矿石和锰精矿.铁含量的测定.火焰原子吸收光谱测定法

이 규격은 망가니즈 광석 및 정광 중의 철 함유량의 분석을 위한 불꽃 원자 흡수 분광

Manganese ores and concentrates－Determination of iron content－Flame atomic absorption spectrometric method

KS E ISO 9292:2002 锰矿石和锰精矿.总铁含量的测定-1.10-菲咯啉光度法

이 규격은 1,10-페난트롤린(1,10-Phenanthroline)을 사용하여 망가니즈

Manganese ores and concentrates－Determination of total iron content－1,10－Phenanthroline spectrometric method

ASTM E248-02 用焦磷酸络合高锰酸盐电势滴定分析法测定锰矿石中锰含量的标准试验方法

1.1 This definitive test method covers the determination of manganese in manganese ore in the range from 15 to 60%. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

KS E ISO 4571:2001 锰矿石和锰精矿.钾和钠含量的测定.火焰原子发射光谱测定法

이 규격은 망가니즈 광석에서 불꽃 원자 방출 분광법을 이용한 나트륨 및 칼륨의 분석 방법에

Manganese ores and concentrates－Determination of sodium and potassium content－Flame atomic emission spectrometric method

KS E ISO 7953:2001 锰矿石和锰精矿.钙和镁含量的测定.火焰原子吸收光谱测定法

이 규격은 망가니즈 광석에서 원자 흡수 분방법을 이용한 칼슘 및 마그네슘의 분석 방법에 대

Manganese ores and concentrate-Determination of calcium and magnesium content-Flame atomic absorption spectrometric method

KS E ISO 7969:2001 锰矿石和锰精矿.钠和钾含量的测定.火焰原子吸收光谱测定法

이 규격은 망가니즈 광석에서 원자 흡수 분광법을 이용한 나트륨 및 칼륨의 분석 방법에 대하

Manganese ores and concentrates －Determination of sodium and potassium contents－Flame atomic absorption spectrometric method

ASTM E465-00 用氧化还原滴定法测定锰矿石中锰含量的标准试验方法

1.1 These test methods cover the determination of manganese dioxide in amounts commonly found in manganese ore. The determination measures the amount of manganese (IV) present in the sample. The result may be expressed as available oxygen or as manganese dioxide. The following test methods are included and may be used interchangeably: SectionsTest Method A (Ferrous Ammonium Sulfate)9-13Test Method B (Periodate (Sodium Oxalate)14-181.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration

ASTM E316-00 用硫化氢还原重铬酸盐滴定法测定锰矿石中铁含量的标准试验方法

1.1 This test method covers the determination of iron in manganese ore in the range from 2 to 20%. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration

ASTM E316-00(2005) 用硫化氢还原重铬酸盐滴定法测定锰矿石中铁含量的标准试验方法

This test method is intended to be used for compliance with compositional specifications for iron content in manganese ores. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed such as those described in Guide E 882. 1.1 This test method covers the determination of iron in manganese ore in the range from 2 to 20%. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration

ASTM E465-00(2005) 用氧化还原滴定法测定锰矿石中锰含量的标准试验方法

This test method is intended to be used for compliance with compositional specifications for manganese dioxide content in manganese ores. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices shall be followed, such as those described in Guide E 882.1.1 These test methods cover the determination of manganese dioxide in amounts commonly found in manganese ore. The determination measures the amount of manganese (IV) present in the sample. The result may be expressed as available oxygen or as manganese dioxide. The following test methods are included and may be used interchangeably: SectionsTest Method A (Ferrous Ammonium Sulfate)9-13Test Method B (Periodate (Sodium Oxalate)14-181.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration

ASTM E248-97 用焦磷酸络合高锰酸盐电势滴定分析法测定锰矿石中锰含量的标准试验方法

1.1 This definitive test method covers the determination of manganese in manganese ore in the range from 15 to 60%. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Method