提升、贮运设备标准-分析测试百科网

DB35/T 1368-2013 轮胎式叉装车试验方法

本标准规定了轮胎式叉装车（以下简称叉装车）的术语和定义、试验前的准备工作、一般试验条件、基本安全要求检查、整机性能试验、稳定性试验、噪声试验、司机视野测定、发动机尾气排放测定和工业性试验。本标准适用于在矿山、石材场、码头等场合用于叉取、转运、堆放石材等块状物体，额定载重量为 10 000 kg～45 000 kg的叉装车。大于45 000 kg的叉装车可参照执行。

Test methods for tire-mounted forklifts

ICS: 73.100.40
CCS: D93
发布: 2013-12-04
实施: 2014-03-01

DIN 21187:2013 凿井.矿井中起吊负载的钢链悬挂齿轮

Shaft sinking - Chain suspension gears for load hoisting in shafts

ICS: 73.100.40
CCS: D93
发布: 2013-03
实施: 2013-03-01

DIN 22252:2012 矿山中连续输送机和回采设备用圆钢链

Round steel link chains for use in continuous conveyors and winning equipment in mining

ICS: 53.040.20
CCS: D93
发布: 2012-07
实施

JB/T 11296-2012 石材矿山叉装车

本标准规定了石材矿山叉装车（以下简称叉装车）的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于石材矿山装卸大块石料和荒料的专用叉装车。

Stone mining forklift loader

ICS: 73.100.40
CCS: D93
发布: 2012-05-24
实施: 2012-11-01

JB/T 9028-2012 运输绞车

本标准规定了运输绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于煤矿井下和其它矿山在倾角小于30°的巷道运输物料和牵引矿车的绞车。本标准不适用于运载人员的绞车。

Transportation winch

ICS: 73.100.40
CCS: D93
发布: 2012-05-24
实施: 2012-11-01

DIN 20551:2012 矿车.前墙,套筒,框架,缓冲区

Mine cars - Front wall, casing, frame, buffer sheet

ICS: 73.100.40
CCS: D93
发布: 2012-01
实施

DIN 20555:2012 矿车锥形滚柱轴承轮组,外部弹簧悬置

Wheel sets with taper roller bearings for mine cars, exterior spring suspension

ICS: 73.100.40
CCS: D93
发布: 2012-01
实施

NF E56-005-1:2011 地下采矿机械.地下作业用移动机械.安全.第1部分:橡胶轮胎车辆

Machines for underground mines - Mobile machines working underground - Safety - Part 1 : rubber tyred vehicles.

ICS: 73.100.40
CCS: D93
发布: 2011-12-01
实施: 2011-12-09

BS EN 1889-1:2011 地下矿井用机械.地下操作的移动机械.安全性.橡胶轮胎车辆

1.1 This European Standard specifies the safety requirements and tests for self-propelled rubber tyred vehicles as defined in 3.1 intended primarily for use in underground mining (i.e. as mine vehicles) and other underground workings (e.g. as tunnelling vehicles). The electrical supply voltage is limited to 1100 A.C. and 1500 D.C. 1.2 This European Standard deals with all significant hazards, hazardous situations and hazardous events, applying to self-propelled, rubber-tyred vehicles, subject to being used according to their intended purpose and prevailing manufacturer’s conditions and within the scope of foreseeable misuse. This European Standard describes appropriate action to be taken to avoid or minimize the risk of significant hazards. 1.3 This European Standard does not include rubber tyred drilling rigs, which are covered by EN 791, or earth-moving machinery not intended primarily for use in underground mines, which are covered by EN 474 (all parts). This European Standard does not take account of specific hazards associated with special-purpose vehicles, e.g. tankers, explosives vehicles. This standard does not cover the use and operation of rubber-tyred vehicles being remotely controlled or operation in potentially explosive atmospheres. 1.4 This European Standard applies to vehicles which are manufactured after the date of issue of this standard.

Machines for underground mines. Mobile machines working underground. Safety. Rubber tyred vehicles