D98 煤矿专用设备器材 标准查询与下载

DIN 21626:2011 矿山潜在爆炸环境用(电动/气动)混合驱动装置的风扇

Fans with hybrid (electric/pneumatic) motor drive intended for use in potentially explosive atmospheres in coal mines

ASTM A540/A540M-11 特殊应用的合金钢锚杆支护的标准规范

1.1 This specification covers regular and special-quality alloy steel bolting that may be used for nuclear and other special applications. See Specification for the definition of bolting. 1.2 The following referenced common requirements are indispensable for application of this specification: Specification . 1.3 Supplementary requirements of an optional nature are provided for use at the option of the purchaser. These supplementary requirements only apply when specified individually by the purchaser in the purchase order or contract. 1.4 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable “M” specification designation (SI units), inch-pound units shall apply. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Alloy-Steel Bolting for Special Applications

DIN 22100-6:2010 地下矿井用合成器材和材料.第6部分:薄板,涂层/非涂层织物.隔板材料和绝缘层材料垫板.安全性要求,检验和标志

Articles and materials from synthetic for use in underground mines - Part 6: Sheeting, coated/uncoated tissue, brattice materials and lagging mats - Safety requirements, testing, marking

DIN 22100-3:2010 地下矿井用合成器材和材料.第3部分:螺旋通风道.安全性要求,检验,标志

Articles and materials from synthetic for use in underground mines - Part 3: Spiral air ducts - Safety requirements, testing, marking

DIN 22100-4:2010 地下矿井用合成器材和材料.第4部分:扁平通风道.安全性要求,检验,标志

Articles and materials from synthetic for use in underground mines - Part 4: Flat air ducts - Safety requirements, testing, marking

MT/T 1097-2008 煤矿机电设备检修技术规范

Coal mine electromechanical equipment maintenance technical specification

DIN 21606:2010 采矿辅助通风设备. 强制通风用柔性塑料通风管. 扁平通风管

Auxiliary ventilation for mining - Flexible plastic ventilation ducts for forced ventilation - Flat ventilation ducts

DIN 21610:2010 采矿辅助通风设备. 柔性塑料空气导管. 试验方法和要求

Auxiliary ventilation for mining - Flexible plastic air ducts - Requirements and test methods

DIN 21605:2010 采矿辅助通风设备. 排气和强制通风用柔性塑料空气导管. 螺旋形空气导管

Auxiliary ventilation for mining - Flexible plastic ventilation ducts for exhaust and forced ventilation - Spiral ventilation ducts

DIN 21612:2010 矿业辅助通风. 柔性通风管道护套材料. 试验和要求

Auxiliary ventilation for mining - Cladding material for flexible airducts - Requirements, testing

DIN VDE 0118-2:2010 矿井电气设备安装.第2部分:补充规定

This standard specifies supplementary requirements for defined installations and apparatus. In conjunction with DIN VDE 0118-1 (VDE 0118-1) it is applicable for the errection of electrical installations in mines and of electrical installations and parts of electrical installations above ground which due to the inseparability of working and operating processes are in direct connexion with mines as far as function and safety are concerned.

Erection of electrical installations in mines - Part 2: Supplementary requirements

DIN VDE 0118-1:2010 矿井电气设备的安装.第1部分:一般要求

This standard specifies safety requirements for electrical installations and apparatus. In conjunction with DIN VDE 0118-2 (VDE 0118-2) it is applicable for the errection of electrical installations in mines and of electrical installations and parts of electrical installations above ground which due to the inseparability of working and operating processes are in direct connexion with mines as far as function and safety are concerned.

Erection of electrical installations in mines - Part 1: General requirements

MT/T 1105-2009 锚杆钻机用玻璃钢支腿

本标准规定了煤矿锚杆钻机用玻璃钢支腿的术语、型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于与煤矿锚杆钻机配套使用的玻璃钢支腿，也可供其他种类煤矿钻孔与凿岩机械配套用玻璃钢支腿参考。

Air cylinder of glass fiber reinforced plastic for roof bolter

MT 52-2009 煤矿用支架式电钻

本标准规定了煤矿用支架式电钻(以下简称电钻)的术语和定义、型号和基本性能参数、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于煤矿煤层、岩层等条件钻进作业的电动回转钻机与回转振动钻机。

Electric support rotary drill in coal mine

MT/T 1100-2009 煤矿用隔爆型高压电缆接线盒

本标准规定了煤矿用隔爆型高压电缆接线盒的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿用隔爆型高压电缆接线盒。

The flame-proof high voltage cable connecting box for coal mine

MT 1101-2009 矿用车载式甲烷断电仪

本标准规定了矿用车载式甲烷断电仪的术语及定义、型号和分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿井下有甲烷气体和煤尘爆炸危险环境使用的矿用车载式甲烷断电仪。

Mining truck-mounted type methane-monitor breaker

MT/T 1099-2009 矿用变频调速装置

Mining frequency conversion speed regulating device

MT 1099-2009 矿用变频调速装置

本标准规定了煤矿具有爆炸性危险气体环境用变频调速装置的型式、规格、技术要求、试验方法、检验规则、标志、包装和储运。 本标准适用于1140V及以下煤矿用变频调速装置。

Frequency conversion equipment for coal mine

MT/T 1101-2009 矿用车载式甲烷断电仪

Mine vehicle-mounted methane power-off device

AQ 1075-2009 煤矿低浓度瓦斯往复式内燃机驱动的交流发电机组通用技术条件

本标准规定了以煤矿低浓度瓦斯往复式内燃机为动力配套而成的发电机组的型号命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于200kW～2000kW煤矿低浓度瓦斯往复式内燃机驱动的交流工频发电机组。

General technical specifications for low concentration coal mine gas alternating current generating sets driven by reciprocating internal combustion engine