F46 核材料、核燃料及其分析试验方法 标准查询与下载
共找到 577 条与 核材料、核燃料及其分析试验方法 相关的标准，共 39 页
Post-Irradiation Inspection of PWR Bundle Fuel Assemblies Part 2: Underwater Visual Inspection of Fuel Assemblies
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Determination of Uranium in Feed Liquid of Reprocessing Process L Absorption Edge Spectrometry
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 14: Eddy Current Inspection of Fuel Rods
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation inspection of PWR rod-bundle fuel assemblies—Part 30: Measurement of Fe, Ni, Cr, Mn, Si, Cu element content in fuel cladding surface deposits by atomic emission spectrometry
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 26: Micro-Vickers hardness test for fuel cladding tubes
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation inspection of fuel assemblies of pressurized water reactor bundle type - Part 27: Mass spectrometry for absolute burnup measurement of fuel rods
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
PWR Rod-Radiation Fuel Assembly Post-Illumination Part 23: SEM Analysis of Fuel Cladding Tubes
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 18: Technical Requirements for Fuel Rod Sampling
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation inspection of PWR rod-bundle fuel assemblies-Part 12: Fuel rod leak detection end compression method
- ICS
- ICS27.120.30
- CCS
- F46
- 发布
- 2018-12-28
- 实施
- 2019-03-01
Post-irradiation inspection of fuel assemblies of pressurized water reactor bundle type - Part 19: Fuel cladding tube tensile test
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 7: Visual Inspection of Fuel Rods
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of pressurized water reactor bundle fuel assemblies - Part 1: General
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of fuel assemblies of pressurized water reactor bundle type - Part 21: Fuel cladding tube internal pressure burst test
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 16: Internal pressure measurement of fuel rods
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 17: Analysis of krypton and xenon in fuel rod fission gases by gas chromatography
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of pressurized water reactor bundle fuel assemblies - Part 25: Metallographic examination of fuel rods
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 10: Bubble method for fuel rod leak detection
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-irradiation inspection of PWR rod-bundle fuel assemblies-Part 29: Measurement of hydrogen content in fuel cladding tubes by high-frequency electrode thermal conductivity method
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
Post-Irradiation Inspection of PWR Bundle Fuel Assemblies Part 13: X-ray Examination of Fuel Rods
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2018-01-18
- 实施
- 2018-05-01
5.1 Factors governing selection of a method for the determination of uranium include available quantity of sample, homogeneity of material sampled, sample purity, desired level of reliability, and facility available equipment. 5.2 This uranium assay method is referenced in the Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets (Test Methods C696) and in the Test Methods for Chemical, Mass Spectrometric, and Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions (Test Methods C799). This uranium assay method may also be used for uranium hexafluoride and uranium ore concentrate. This test method determines 20 to 200 mg of uranium; is applicable to product, fuel, and scrap material after the material is dissolved; is tolerant towards most metallic impurity elements usually specified in product and fuel; and uses no special equipment. 5.3 The ruggedness of the titration method has been studied for both the volumetric (6) and the weight (7) titration of uranium with dichromate. 5.4 Fitness for Purpose of Safeguards and Nuclear Safety Application—Methods intended for use in safeguards and nuclear safety applications shall meet the requirements specified by Guide C1068 for use in such applications. 5.4.1 When used in conjunction with the appropriate certified reference materials (SRM6 or CRM), this procedure can demonstrate traceability to the national measurement base. However, use of the test method does not automatically guarantee regulatory acceptance of the resulting safeguards measurements. It remains the sole responsibility of the user of this test method to assure that its application to safeguards has the approval of the proper regulatory authorities. 1.1 This test method, commonly referred to as the Modified Davies and Gray technique, covers the titration of uranium in product, fuel, and scrap materials after the material is dissolved. The test method is versatile and has been ruggedness tested. With appropriate sample preparation, this test method can give precise and unbiased uranium assays over a wide variety of material types (1, 2).2 Details of the titration procedure in the presence of plutonium with appropriate modifications are given in Test Method C1204. 1.2 Uranium levels titrated are usually 20 to 50 mg, but up to 200 mg uranium can be titrated using the reagent volumes stated in this test method. 1.3 The values stated ......
Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
- ICS
- 27.120.30
- CCS
- F46
- 发布
- 2017
- 实施
