F69 核反应堆与核电厂核岛设备 标准查询与下载

NB/T 20450.1-2017 压水堆核电厂核岛机械设备焊接另一规范 第1部分：通用要求

Another Specification for Welding of Mechanical Equipment on Nuclear Islands of Pressurized Water Reactor Nuclear Power Plants Part 1: General Requirements

NB/T 20450.3-2017 压水堆核电厂核岛机械设备焊接另一规范 第3部分：焊接工艺评定

Another Specification for Welding of Nuclear Island Mechanical Equipment in Pressurized Water Reactor Nuclear Power Plants Part 3: Welding Process Qualification

NB/T 20440-2017 压水堆核电厂反应堆压力容器防止快速断裂评定准则

Assessment criteria for rapid fracture prevention of reactor pressure vessels in pressurized water reactor nuclear power plants

NB/T 20438-2017 非能动压水堆核电厂屏蔽厂房屋顶结构施工技术规程

Technical regulations for construction of shielded factory roof structures in passive dynamic pressurized water reactor nuclear power plants

NB/T 20432-2017 核电厂安全重要仪表正常和预计运行事件工况工艺流管内或管旁放射性连续监测设备

Radioactive continuous monitoring equipment in or near the process flow pipe under normal and expected operating conditions of important nuclear power plant safety instruments

NB/T 20439-2017 压水堆核电厂反应堆压力容器压力-温度限值曲线制定准则

Guidelines for developing pressure-temperature limit curves for reactor pressure vessels in pressurized water reactor nuclear power plants

NB/T 20450.2-2017 压水堆核电厂核岛机械设备焊接另一规范 第2部分：焊接材料

Another specification for welding of nuclear island machinery and equipment in pressurized water reactor nuclear power plants Part 2: Welding materials

NB/T 20450.4-2017 压水堆核电厂核岛机械设备焊接另一规范 第4部分：产品焊接和热处理

Another specification for welding of nuclear island machinery and equipment in pressurized water reactor nuclear power plants Part 4: Product welding and heat treatment

NB/T 20429-2017 核电厂事故处理规程编写要求

Requirements for writing accident handling procedures for nuclear power plants

NB/T 20451-2017 核电工程施工信息化管理通用要求

General requirements for information management of nuclear power project construction

NB/T 20450.5-2017 压水堆核电厂核岛机械设备焊接另一规范 第5部分：焊接检验

Another specification for welding of nuclear island machinery and equipment in pressurized water reactor nuclear power plants Part 5: Welding inspection

DB34/T 2844.3-2017 大型低温超导磁体结构部件设计准则 第3部分：非金属部件

DB34/T 2844 的本部分规定了低温超导磁体非金属结构部件的设计规范。 本部分适用于低温超导磁体系统由如下应力引起的失效形式的判定： a) 过度弹性变形，包括弹性失稳； b) 过度塑性变形； c) 脆性断裂； d) 塑性失稳-增量失稳； e) 高应变低周疲劳； f) 结构破坏或磨损导致的电气故障。

Design criteria for structural components of large low-temperature superconducting magnets Part 3: Non-metallic components

DB34/T 2843-2017 高温超导叠制造工艺及试验方法

本标准规定了高温超导叠制造工艺及试验方法的术语和定义、焊接材料要求、超导叠焊接、超导叠测试和测试报告。 本标准适用于真空超导叠焊接制造及测试方法。

High temperature superconducting stack manufacturing process and test method

DB34/T 2844.1-2017 大型低温超导磁体结构部件设计准则 第1部分：应力术语

DB34/T 2844 的本部分规定了大型低温超导磁体主要结构部件的相关应力术语。 本部分适用于低温超导磁体结构部件设计。

Design Guidelines for Structural Components of Large Low Temperature Superconducting Magnets Part 1: Stress Terminology

DB34/T 2844.2-2017 大型低温超导磁体结构部件设计准则 第2部分：金属部件

DB34/T 2844 的本部分规定了低温超导磁体关于金属结构部件的设计要求。 本部分适用于低温超导磁体系统中金属结构部件的设计。

Design Guidelines for Structural Components of Large Low Temperature Superconducting Magnets Part 2: Metallic Components

NB/T 20009.34-2017 压水堆核电厂用焊接材料 第34部分：安全级设备镍基合金堆焊用焊带和焊剂

Welding consumables for pressurized water reactor nuclear power plants Part 34: Welding ribbons and fluxes for cladding of nickel-based alloys for safety grade equipment

NB/T 20407-2017 压水堆核电厂堆内构件设计制造规范

Specifications for design and manufacturing of internal components of pressurized water reactor nuclear power plants

NB/T 20009.27-2017 压水堆核电厂用焊接材料 第27部分：安全级设备用不锈钢焊丝

Welding consumables for pressurized water reactor nuclear power plants Part 27: Stainless steel welding wire for safety grade equipment

NB/T 20009.31-2017 压水堆核电厂用焊接材料 第31部分：安全级设备不锈钢堆焊用焊带和焊剂

Welding consumables for pressurized water reactor nuclear power plants Part 31: Welding ribbons and fluxes for stainless steel cladding of safety grade equipment

NB/T 20408-2017 核电厂物项包装、运输、装卸、接收、贮存和维护要求

Packaging, transportation, handling, receiving, storage and maintenance requirements for nuclear power plant items