F74 辐射防护监测与评价 标准查询与下载

DIN ISO 11665-5:2013 环境辐射性测量.空气:氡-222.第5部分:放射性浓度连续测量法(ISO 11665-5-2012)

Measurement of radioactivity in the environment - Air: radon-222 - Part 5: Continuous measurement method of the activity concentration (ISO 11665-5:2012)

DIN ISO 11665-3:2013 环境辐射性测量.空气:氡-222.第3部分:其短暂寿命衰减产物的潜在阿尔法能量浓度点测法(ISO 11665-3-2012)

Measurement of radioactivity in the environment - Air: Radon-222 - Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products (ISO 11665-3:2012)

DIN ISO 11665-2:2013 环境辐射性测量.空气:氡-222.第2部分:其短暂寿命衰减产物的平均势测定α能量浓度综合测量方法(ISO 11665-2-2012)

Measurement of radioactivity in the environment - Air: radon-222 - Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products (ISO 11665-2:2012)

DIN ISO 11665-4:2013 环境辐射性测量.空气:氡-222.第4部分:利用被动采样和延迟分析测定平均活性浓度的综合测量方法(ISO 11665-4-2012)

Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis (ISO 11665-4:2012)

DIN ISO 11665-1:2013 环境辐射性测量.空气:氡-222.第1部分:氡及其短寿命衰变产物的来源及相关测量方法(ISO 11665-1-2012)

Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods (ISO 11665-1:2012)

DIN 25457-4:2013 核设施放射性残余物质和退役零件排放用放射性活度测量方法.第4部分:已污染活性废金属

Activity measurement methods in the clearance of radioactive substances and components of nuclear facilities - Part 4: Contaminated and activated metal scrap

DIN EN 16237:2013 非相干光学辐射的非电源分类.德文版本EN 16237-2013

Classification of non-electrical sources of incoherent optical radiation; German version EN 16237:2013

JIS Z 4316:2013 放射性气溶胶监测仪

Radioactive aerosol monitors

NB/T 20182-2012 核电厂事故工况气载放射性物质释放辐射环境影响评价技术规范

本标准规定了核电厂选址假想事故和设计基准事故工况下气载放射性物质释放辐射环境影响评价 的内容、方法和要求。 本标准适用于核电厂选址、建造和运行等阶段事故工况下的辐射环境影响评价。

Technical specification for radiation environmental impact assessment of airborne radioactive material release in nuclear power plant accident conditions

DIN 25457-1:2013 清理放射性物质与核设施部件的活度测量方法. 第1部分: 基础

Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals

DIN 25425-4 Bb.2:2013 放射性同位素实验室.第4部分:人员保护规则.伽马和贝它射线辐射防护的指导性说明

Radioisotope laboratories .Part 4: Rules for the protection of persons; Guidance notes on shielding of gamma- and beta-radiation

ANSI N13.3-2013 事故临界的剂量测定

Dosimetry for Criticality Accidents

ANSI/ASTM E1649:2013 在300 KeV和25 MeV能量之间进行辐射加工用电子束设备中剂量测定的操作规程

Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV

ANSI/ASTM E1608:2013 辐射处理用X射线(韧致辐射)设施中剂量测定的实施规程

Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing

ANSI/ASTM E1707:2013 辐射处理用剂量测定中不确定度的评估指南

Guide for Estimating Uncertainties in Dosimetry for Radiation Processing

DIN ISO 12789-2:2013 参考辐射区域.模拟工作场所中子区域.第2部分:与基础量相关的校准基本原则(ISO 12789-2-2008)

This part of ISO 12789 describes the characterization of simulated workplace neutron fields produced by methods described in ISO 12789-1. It specifies the procedures used for establishing the calibration conditions of radiation protection devices in neutron fields produced by these facilities,with particular emphasis on the scattered neutrons. The diversity of workplace neutron fields is such that several special facilities have been built in order to simulate them in the laboratory. In this part of ISO 12789,the neutron radiation field specifications are classified by operational quantities. General methods for characterizing simulated workplace neutron fields are recommended.

Reference radiation fields - Simulated workplace neutron fields - Part 2: Calibration fundamentals related to the basic quantities (ISO 12789-2:2008)

DIN ISO 12789-1:2013 参考辐射区域.模拟工作场所中子区域.第1部分:生产特性和方法(ISO 12789-1-2008)

This part of ISO 12789 gives guidance for producing and characterizing simulated workplace neutron fields that are to be used for calibrating neutron-measuring devices for radiation protection purposes. Both calculation and spectrometric measurement methods are discussed. Neutron energies in these reference fields range from approximately thermal neutron energies to several hundred GeV. The methods of production and the monitoring techniques for the various types of neutron fields are discussed, and the methods of evaluating and reporting uncertainties for these fields are also given.

Reference radiation fields - Simulated workplace neutron fields - Part 1: Characteristics and methods of production (ISO 12789-1:2008)

DIN 25457-1 Bb.1:2013 放射性物质和核设施部件的间隙的活性测量方法. 第1部分:基本原理; 补充件1:说明

Activity measurement methods for the clearance of radioactive substances and nuclear facility components.Part 1: Fundamentals; Supplement 1: Explanations

ANSI/ANS 2.15-2013 建模和计算核设施日常辐射释放大气色散的准则

Criteria for Modeling and Calculating Atmospheric Dispersion of Routine Radiological Releases from Nuclear Facilities

ANSI N14.36-2013 包装和运输用辐射水平和表面污染测量

Measurement of Radiation Level and Surface Contamination for Packages and Conveyances