F79 防护用具与设备 标准查询与下载

JIS Z 4811:1995 放射性污染防护靴袜

この規格は，原子力関連の事業所において，放射性汚染防護のために使用する放射性汚染防護用作業靴(以下，作業靴という。)について規定する。

Protective footwear for radioactive contamination

DLA MIL-A-24914 NOTICE 1-1994 防放射性污染臂袖[使用:DLA A-A-50385 CANC 通知 1,DLA A-A-50385]

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

ARM SLEEVE, RADIOACTIVE CONTAMINANTS, PROTECTIVE [Use: DLA A-A-50385 CANC NOTICE 1, DLA A-A-50385]

JIS Z 4809:1993 防放射性污染的防护衣

この規格は，原子力施設などにおいて，放射性汚染に対する防護を目的として使用する防誇服のうち，換気加圧服及び非換気非加圧服について規定する。

Clothing for protection against radioactive contamination

DLA MIL-H-82244 F-1993 捉用放射性物质保护罩

This specification covers the requirements for type of radioactive contaminant protective hood made of polyester and cotton twill cloth.

HOOD, RADIOACTIVE CONTAMINANTS, PROTECTIVE

NF M60-704*NF ISO 9271:1992 放射性污染表面的去污.纺织品用去污剂的检测

Decontamination of radioactively contaminated surfaces. Testing of decontamination agents for textiles.

NF M62-300*NF ISO 9404-1:1992 电离辐射防护壳.厚度为150mm,200mm和250mm的铅防护壳.第1部分:厚度为150mm和200mm的波纹式防护壳

Enclosures for protection against ionizing radiation. Lead shielding units for 150 mm, 200 mm and 250 mm thick walls. Part 1 : chevron units of 150 mm and 200 mm thickness.

IEC 60532:1992 辐射防护仪表 固定式X和γ辐射(能量在50keV和7MeV之间)剂量率仪、报警装置和监测仪

Instruments measuring over a more limited energy range fall within the scope provided they cover at least the range of 80 keV to 1,5 MeV. The assemblies comprise at least a detector sub-assembly and a measuring sub-assembly. Specifies standard general ch

Radiation protection instrumentation; installed dose ratemeters, warning assemblies and monitors; X and gamma radiation of energy between 50 keV and 7 MeV

ISO 9404-1:1991 电离辐射防护屏蔽 150mm、200mm和250mm厚墙用铅屏蔽构件 第1部分:150mm和200mm厚楔形构件

Specifies the properties of the various lead units used in the construction of basic units (bricks, posts) and functional units (aperture bricks, windows, sphere units, plugs and reducing units). Annex A is for information only.

Enclosures for protection against ionizing radiation; lead shielding units for 150 mm, 200 mm and 250 mm thick walls; part 1: chevron units of 150 mm and 200 mm thickness

QJ 1874-1990 接地、搭接和屏蔽的设计应用

Design applications for grounding, bonding and shielding

EJ/T 513-1990 放射性污染防护手套

Radioactive Contamination Protective Gloves

STAS 9006/2-1990 电子设备．机架结构的机柜和齿距，系列482，6 mm 尺寸

Prezentul standard stabile?te dimensiunile de baz? ale dulapurilor ?i structurilor de fixare sau combina?ii ale acestora pe care se pot monta sertare ?i panouri de 482,6 mm, destinate echipamentelor electronice.

Electronic equipments. Cabinets and pitches of rack structures, series 482,6 mm. Dimensions

ARMY MIL-R-49421 A-1990 DT-236()/PDR-75型放射性检测仪

Ihis specification mers the rquhemmts for construction and testhg of the Radiac Detector DF236/pDw-75, individuai, indrrect reading, neutr0nqam-n dmhter for detecting, measuring neutr0n and gamma doses received by individual soldiers operating in nuclear environments.

RADIAC DETECTOR DT-236( )/PDR-75

EJ/T 435-1989 放射性污染防护服的设计、检验、选择和使用

Design, inspection, selection and use of protective clothing against radioactive contamination

DIN 25412-1:1988 实验室设备.手套箱.第1部分:尺寸和要求

This standard specifies dimensions and requirements for glove boxes. The purpose of the standard is to give uniform guidelines to manufacturers, suppliers, users and authorities on dimensions and requirements, in particular on the leak-tightness of gove boxes. The standard shall be applied to glove boxes which are used for handling radioactive materials emitting ionizing radiation. The standard shall not be applied to glove boxes used in processes on a technical state.#,,#

Laboratory equipment; glove boxes; dimensions and requirements

NF M60-601:1987 辐射防护.防止放射性污染用的防护衣.设计、选择、试验和应用

RADIATION PROTECTION. CLOTHING FOR PROTECTION AGAINST RADIOACTIVE CONTAMINATION. DESIGN,SELECTION,TESTING AND USE.

ISO 8194:1987 辐射防护 辐射污染防护服 设计、选择、检验和使用

Gives the characterisitcs of two types of clothing: ventilated-pressurized garments and unventilated-unpressurized garments. These characteristics include the manufacture materials, design and size, accessories, breathing air supply and internal ventilation. Annex A describes a test method according to which any new type of garment can be assigned a protection factor that makes it easier for the user to make a choice. Annexes B and C give methods for measuring leak tightness and air supply flow rates of ventilated-pressurized garments. Annex F gives, for guidance, recommendations for choosing protective clothing.

Radiation protection; Clothing for protection against radioactive contamination; Design, selection, testing and use

DIN 25480-1:1987 污染防护箱用元件.喷嘴、远距离操作钳用环.窗和支柱系统

This standard specifies requirements relating to components of contamination protection boxes. These boxes are used in hot cells with shieldings made of lead bricks and special components complying with DIN 25407 part 1 and 2.; The components complying with this standard and those complying with DIN 25407 part 1 and 2 are used to build hot cells with sealed interiors and surrounding lead shieldings (Alpha-Gamma-Technique).

Components for contamination protection boxes; nozzles, rings for remote handling tongs, windows and posting systems

DIN 25412-1 Bb.1:1987 手套箱.附件

Glove boxes; accessories

DLA MIL-A-24914-1984 防放射性污染臂袖[代替:DLA A-A-50385 CANC NOTICE 1, DLA A-A-50385]

This specification covers the requirements for protective arm sleeves made of flexible vinyl plastic film.

ARM SLEEVE, RADIOACTIVE CONTAMINANTS, PROTECTIVE [Use: DLA A-A-50385 CANC NOTICE 1, DLA A-A-50385]

BS 4247-2:1982 放射性区域用表面材料.第2部分:材料选用指南

Gives general advice on the selection of materials which may become contaminated by radioactive substances and which require subsequent decontamination. Appendix A provides information relating to the radiation resistance of materials.

Surface materials for use in radioactive areas - Guide to the selection of materials