F80 核仪器与核探测器综合 标准查询与下载

EJ/T 1050-2012 核仪器图形符号、文字代号和参数符号

本标准规定了核仪器 (包括核辐射探测器) 常用的图形符号、 文字代号、 参数符号及下标符号。 本标准适用于涉及核仪器 (包括核辐射探测器〉 的标准、 产品设计文件、 使用说明书等技术文件和 刁刊中的图形符号、 文字代号、 参数符号及下标符号。

Graphical symbols, text codes and parameter symbols of nuclear instruments

JIS Z 4342:2013 测量食品中伽马-发射放射性核素比活度用设备

Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs

ANSI N13.22-2013 铀生物测定计划

Bioassay Program for Uranium

ANSI N43.4-2013 放射性自发光光源的分类

Classification of Radioactive Self-Luminous Light Sources

KS C IEC 61577-3:2012 放射线防护测量仪器.氡和氡衰变产物测量设备.第3部分:氡衰变产物系数装置用细节条件

IEC 61577 시리즈 중 이 표준의 요건은 작업 장소, 거주 구역 및 거주 구역 밖에서

Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part 3:Specific requirements for radon decay product measuring instruments

KS C IEC 61577-2:2012 放射线防护测量仪器.氡和氡衰变产物测量设备.第2部分:氡测定测量机的特殊要求

IEC 61577 시리즈에서 이 표준의 요건들은 공기 중 라돈 부피 방사능 농도의 측정을

Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part 2:Specific requirements for radon measuring instruments

KS C IEC 61577-4:2012 放射线防护测量仪器.氡和氡衰变产物测量设备.第4部分:氡的同位元素及其衰变产物包含大气生成装备标准

이 표준은 라돈과 이들의 붕괴 생성물 측정 기기의 시험과 교정에 관계되는 일반적인 특성을

Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part 4:Equipment for the production of reference atmospheres containing radon isotopes and their decay products(STAR)

KS C IEC 61577-1:2012 放射线防护测量仪器.氡和氡衰变产物测量设备.第1部分:通用原则

IEC 61577 시리즈는 라돈 및 라돈 붕괴 생성물 측정 기기의 시험과 교정에 관련한 일

Radiation protection instrumentation－Radon and radon decay product measuring instruments－Part 1：General principles

KS A ISO/ASTM 51702:2012 辐射加工用γ辐射装置中剂量测定的实施规程

1.1 이 표준은 흡수선량의 사전결정준위 내에서 제품의 처리를 위하여, 전리방사선이 감마선

Practice for dosimetry in a gamma irradiation facility for radiation processing

KS A ISO/ASTM 51707:2012 辐射加工的剂量测定中不确定度的估算指南

1.1 이 지침은 감마, X-선(제동복사), 그리고 전자 방사선 조사 시설에서 수행되는 선

Guide for estimating uncertainties in dosimetry for radiation processing

KS A ISO/ASTM 51608:2012 辐射加工用X射线(轫致辐射)设备中放射剂量测定实施规程

1.1 이 지침서는 모든 제품이 미리 정해진 흡수선량 영역 내에서 처리되고 있다는 것을 보

Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing

KS A ISO/ASTM 51539:2012 辐射感知指示计使用指南

1.1 이 지침은 방사선 처리에 사용하는 방사선 감지 지시계(이하 지시계) 사용 절차를 다

Guide for use of radiation-sensitive indicators

KS C IEC 61888:2012 核电厂.安全仪器仪表.事故保护定值器的测定和维护

이 표준은 원자력 안전 계통 계측 설비(3.의 정의 참조)의 자동 설정값이 원자력발전소 및

Nuclear power plants－Instrumentation important to safety－Determination and maintenance of trip setpoints

KS A ISO/ASTM 51956:2012 辐射加工用热致发光剂量测定(TLD)系统使用规程

1.1 이 관행은 물에서의 흡수선량의 항으로 광자 또는 전자선에 의하여 조사되는 물질에서의

Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing

BS IEC 61577-3:2011 辐射防护测量仪器.氡和氡降解产物的测量仪.氡降解产物测量仪的特殊要求

Radiation protection instrumentation. Radon and radon decay product measuring instruments. Specific requirements for radon decay product measuring instruments

NB/T 20063-2012 核电厂仪表和控制术语

本标准规定了核电厂仪表和控制（I&C）及其动力源相关的常用术语和定义。 本标准适用于核电厂工程应用，其他核设施可参照使用。

Glossary of terms of instrumentation and control for nuclear power plants

ASTM D7759-12 核表面水分和密度调校准设备调整标准指南

Gauge calibration is performed for the following purposes: To formulate a mathematical equation, or density calibration equation, that relates the gauge density system response (the “density count”) to the soil-equivalent density of the standard on which this response is elicited. To formulate a mathematical equation, or water content calibration equation, that relates the gauge water content system response (the “water content count”) to the water mass per unit volume value of the standard on which this response is elicited. To ensure that the gauge has an in-place water mass per unit volume gauge precision level that is consistent with typical gauge response. Gauge verification is performed for the following purposes: To indicate to the party or agency performing the verification when the mathematical relationship between the in-place density reading indicated by the gauge and the corresponding gauge density test count needs to be adjusted so that the gauge calibration meets the required level of measurement uncertainty. To indicate to the party or agency performing the verification when the mathematical relationship between the water mass per unit volume indicated by the gauge and the corresponding gauge water content test count needs to be adjusted so that the gauge calibration meets the required level of measurement uncertainty. Gauge verification and calibration require specialized training and equipment. Gauge calibration and verification should only be conducted by those trained in the proper operation of the gauge, the calibration or verification standards, and any tables, charts, graphs, or computer programs required for the proper execution of these operations.1.1 This guide describes the process and objective of calibrating the density system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the density system response (the “density count”) of a nuclear surface moisture and density gauge and the corresponding density value of the density standard upon which the density system response was observed. 1.2 This guide describes the process and objective of calibrating the water content system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the water content system response (the “water content count”) of a nuclear surface moisture and density gauge and the corresponding water mass per unit volume value of the water content standard upon which the water content system response was observed. 1.3 This guide describes the process and objective of verifying the density system of a nuclear surface moisture and density gauge. 1.4 This guide describes the process and objective of verifying the water content system of a nuclear surface moisture and density gauge. 1.5 This guide describes two mathematical processes by which the gauge measurement precision may be computed or measured. 1.6 This guide offers guidance for developing and reporting estimates of uncertainties in measurements made with gauges that have undergone calibration or verification. 1.7 All observed and calculated values shall confirm to the guide for significant digits and rounding established in Practice D6026. 1.8 This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this guide to estab......

Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

JJG 2048-2011 500K～1000K全辐照计量器具检定系统表

本检定系统表适用于500 K～l 000 K辐射计量器具的量值传递。它规定了500 K～1 000 K全辐照国家计量基准量值（以下简称"全辐照基准"）通过计量标准向工作计量标准器具进行量值传递的程序、考法和最佳测量能力。在开展校准时，也可作为量值溯源的依据。

Verification Regulation of Measuring Instruments for 500 K～1 000 K Irradiance Scale

DIN IEC 62495:2011 核仪器.使用微型X射线管的便携式X射线荧光分析设备(IEC 62495-2011)

Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube (IEC 62495:2011)

ANSI/ASTM E2303:2011 在放射处理设备中吸收剂分布指南

Guide for Absorbed-Dose Mapping in Radiation Processing Facilities