共找到 379 条与 辐射防护仪器 相关的标准,共 26 页
발전소 성능을 평가하고 가능한 방사능 유출에 대한 정보를 초기 단계에 제공하며 발전소 운전
Nuclear power plants-Instrumentation important to safety-Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
이 표준은 사고 및 사고 후 상태와 관련하여 원자력 발전소에서 사용하는 연속 고준위 영역
Nuclear power plants-Instrumentation important to safety-Radiation monitoring for accident and post-accident conditions-Part 3:Equipment for continuous high range area gamma monitoring
Radiation protection instrumentation - Environmental, electromagnetic and mechanical performance requirements
"This standard applies to all kinds of passive dosimetry systems that are used for measuring -the personal dose equivalent Hp(10) (for whole body dosimetry)@ ?C the personal dose equivalent Hp(3) (for eye lens dosimetry)@ -the personal dose equivalent Hp(0@07) (for both whole body and extremity dosimetry)@ -the ambient dose equivalent H*(10) (for environmental dosimetry)@ or -the directional dose equivalent H '(0@07) (for environmental dosimetry). NOTE 1 The term ""environmental dosimetry"" means ambient@ area@ and environmental monitoring in this standard. This standard applies to dosimetry systems that measure external photon and/or beta radiation in the dose range between 0@01 mSv and 10 Sv and in the energy ranges. All the energy values are mean energies with respect to the prevailing dose quantity. The dosimetry systems usually use electronic devices for the data evaluation and thus are often computer controlled. NOTE 2 In this standard@ ""dose"" means dose equivalent@ unless otherwise stated. NOTE 3 For Hp(10) and H*(10) no beta radiation is considered. Reasons: 1) Hp(10) and H*(10) are a conservative estimate for the effective dose which is not a suitable quantity for beta radiation. 2) No conversion coefficients are available in ICRU 56@ ICRU 57 or ISO 6980-3. NOTE 4 The maximum energy ranges are the energy limits within which type tests according to this standard are possible. The test methods concerning the design (Clause 8)@ the instruction manual (Clause 9)@ the software (Clause 10)@ environmental influences (Clause 13)@ electromagnetic influences (Clause 14)@ mechanical influences (Clause 15)@ and the documentation (Clause 16) are independent of the type of radiation. Therefore@ they can also be applied to other dosimetry systems@ e.g. for neutrons@ utilizing the corresponding type of radiation for testing. This standard is intended to be applied to dosimetry systems that are capable of evaluating doses in the required quantity and unit (Sv) from readout signals in any quantity and unit. The only correction that may be applied to the evaluated dose (indicated value) is the one resulting from natural background radiation using extra dosemeters. NOTE 5 The correction due to natural background can be made before or after the dose calculation."
Radiation protection instrumentation - Passive integrating dosimetry systems for personal and environmental monitoring of photon and beta radiation
Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring. General characteristics and performance requirements
이 표준은 원전의 사고 및 사고 후 기체 유출물 및 환기 공기의 방사능을 오프라인 방식으로
Nuclear power plants-Instrumentation important to safety- Radiation monitoring for accident and post-accident conditions- Part 2:Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
이 표준은 개인이 착용하는 청각 또는 시청각 경고 장치에 적용된다.이 표준은 60
Radiation protection instrumentation-Monitoring equipment-Personal warning devices for X and gamma radiations
이 표준은 다음 특성을 갖는 개인선량당량계에 적용된다.a) 신체의 몸통 및 사지에
Radiation protection instrumentation-Measurement of personal dose equivalents Hp(10) and Hp(0.07) for X, gamma, neutron and beta radiations-Direct reading personal dose equivalent meters
이 표준은 비상 상황에서 공기에 대한 흡수선량과 흡수선량률을 측정하는 계측기의 성능 인자에
High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
이 표준은 원전의 사고 및 사고 후 방사선 및 유체(기체 및 액체)의 방사능 준위를 측정하
Nuclear power plants-Instrumentation important to safety- Radiation monitoring for accident and post-accident conditions- Part 1:General requirements
Radiation protection instrumentation - Data format for radiation instruments used in the detection of illicit trafficking of radioactive materials
Radiation protection instrumentation - Electronic counting dosemeters for pulsed fields of ionizing radiation
Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements (IEC 62387-1:2007, modified); German version EN 62387-1:2012
Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2011)
Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items (IEC 62463:2010)
Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders (IEC 62244:2006, modified); German version EN 62244:2011
Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters (ISO 8769:2010)
Radiation protection instrumentation - Portable photon contamination meters and monitors (IEC 62363:2008, modified); German version EN 62363:2011
Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation (IEC 62327:2006, modified); German version EN 62327:2011
This part of IEC 61577 describes the specific requirements for instruments measuring the volumetric activity of airborne short-lived radon decay products and/or their ambient potential alpha-energy concentration outdoors@ in dwellings@ and in workplaces including underground mines. This standard applies practically to all types of electronic instruments that are based on grab sampling@ continuous sampling technique and electronic integrating measurement methods. The measurement of activity retained by a sampling device@ for example a filtering device@ can be performed both during sampling or after the completion of a collection cycle. The different types of instrumentation used for measurements are stated in IEC 61577-1.
Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号