F84 辐射防护仪器 标准查询与下载

BS IEC 62534:2010 辐射防护使用仪器.放射性物质中子探测用高灵敏度手持式仪器

Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material

BS IEC 62533:2010 辐射防护使用仪器.放射性物质光子探测高灵敏度手持仪器

Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material

IEC 61526:2010 辐射防护装置.X、γ、中子和β射线辐射个人剂量当量Hp(10)和Hp(0.07)的测量.直读式个人剂量当量计

This International Standard applies to personal dose equivalent meters with the following characteristics: a) They are worn on the trunk or the extremities of the body. b) They measure the personal dose equivalents Hp(10) and Hp(0,07) from external X and gamma, neutron and beta radiations, and may measure the personal dose equivalent rates H& p (10) and H& p (0,07). c) They have a digital indication. d) They may have alarm functions for the personal dose equivalents or personal dose equivalent rates. This standard is therefore applicable to the measurement of the following combinations of dose quantities (including the respective dose rates) and radiation 1) Hp(10) and Hp(0,07) from X and gamma radiations; 2) Hp(10) and Hp(0,07) from X, gamma and beta radiations; 3) Hp(10) from X and gamma radiations; 4) Hp(10) from neutron radiations; 5) Hp(10) from X, gamma and neutron radiations; 6) Hp(0,07) from X, gamma and beta radiations. This standard specifies requirements for the dosemeter and, if supplied, for its associated readout system. This standard specifies, for the dosemeters described above, general characteristics, general test procedures, radiation characteristics as well as electrical, mechanical, safety and environmental characteristics. The only requirements specified for associated readout systems are those which affect its accuracy of readout of the personal dose equivalent and alarm settings and those which concern the influence of the reader on the dosemeter. This standard also specifies in Annex C usage categories with respect to different measuring capabilities. This standard does not cover special requirements for accident or emergency dosimetry although the dosemeters may be used for this purpose. The standard does not apply to dosemeters used for measurement of pulsed radiation, such as radiation emanating from most medical diagnostic X-ray facilities, linear accelerators or similar equipment.

Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters

IEC 62534:2010 辐射防护装置.放射性物质的中子探测用高敏感度手持装置

This International Standard applies to hand-held instruments used for the detection and localization of neutron emitting radioactive material. These instruments are highly sensitive meaning that they are designed to detect slight variations in the range of usual background that may be caused by illicit trafficking or inadvertent movement of radioactive material. This high sensitivity allows scanning of larger volume items such as vehicles and containers. These instruments may also be used in fixed or temporally fixed unattended mode to monitor check points or critical areas. Instruments addressed by this standard will also provide a means to detect photon radiation for personal protection. This standard does not apply to the performance of radiation protection instrumentation which is covered in IEC 61005 and in IEC 61526. The object of this standard is to establish performance requirements, provide examples of acceptable test methods, and to specify general characteristics, general test conditions, radiation characteristics, electrical safety, and environmental characteristics, that are used to determine if an instrument meets the requirements of this standard. The results of tests performed provide information to government agencies and other users on the capability of radiation detection instruments for reliably detecting neutron sources. Obtaining operating performance that meets or exceeds the specifications as stated in this standard depends upon properly establishing appropriate operating parameters, maintaining calibration, implementing a suitable response testing and maintenance program, auditing compliance with quality requirements, and providing proper training for operating personnel.

Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material

IEC 62463:2010 辐射防护仪器.个人安全的屏蔽和危险物品的运载用X-射线系统

This International Standard is applicable to X-ray systems designed for screening people to detect if they are carrying objects that could be used for criminal purposes, e.g., terrorist use, drug smuggling and theft. These objects include weapons, explosives, chemical and biological agents and other concealed items. Three types of X-ray screening systems are currently in use. These are backscatter systems, transmission systems and combination backscatter/transmission systems. With backscatter systems the X-rays are used to detect objects hidden under or within the person’s clothing. With transmission systems objects swallowed or hidden in body cavities may be detected. Combined devices can be used to get both pieces of information simultaneously. The object of this standard is to lay down standard requirements and also to specify general characteristics, general test procedures, radiation characteristics, electrical characteristics, environmental influences, mechanical characteristics, safety requirements and to provide examples of acceptable methods in terms of dose to the whole or part of the body for each screening procedure and the time taken for each screening procedure. In particular the standard addresses the design requirements as they relate to the radiation protection of the people being screened, people who are in the vicinity of the equipment and the operators. The standard does not address the performance requirements for the quality of the object detection.

Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of the illicit items

IEC 62533:2010 辐射防护装置.放射性物质的光子探测用高敏感度手持装置

This International Standard applies to hand-held instruments used for the detection and localization of radioactive photon emitting materials. These instruments are highly sensitive meaning that they are designed to detect slight variations in the range of usual photon background caused mainly by illicit trafficking or inadvertent movement of radioactive material. Compared to pocket devices (see IEC 62401), this highly sensitive instrument allows the scanning of larger volume items such as vehicles or containers. They may also be used in fixed or temporarily fixed unattended mode to monitor check points or critical areas. These instruments also provide an indication of the ambient dose equivalent rate from photon radiation. However, this standard does not apply to the performance of radiation protection instrumentation which is covered in IEC 60846-1 and IEC 61526. These instruments may provide additional functions as described below without including all features of specialized portable identification devices as defined by IEC 62327: ? rejecting natural background variation encountered when used in movement; ? sorting alarms of interest from naturally occurring radioactive material (NORM) or medical radionuclides originated alarms; ? provide source categorization data (including limited photon spectra) to a remote location. The object of this standard is to establish performance requirements including physical characteristics, general test conditions, radiation characteristics, electrical safety, and environmental conditions. This standard provides examples of acceptable test methods to determine if an instrument meets the requirements of this standard. The results of tests performed provide information to users on the capability of radiation detection instruments for reliably detecting photon sources. Obtaining operating performance that meets or exceeds the specifications as stated in this standard depends upon properly establishing appropriate operating parameters, maintaining calibration, implementing a suitable response testing and maintenance program, providing proper training for operating personnel and developing operating procedures that address the instrument limitations and capabilities.

Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material

IEC 62523:2010 辐射防护仪器.货物/车辆射线透照检查系统

This International Standard applies to radiographic inspection systems with photon radiation energy of at least 500 keV for inspection of cargo, vehicles and cargo containers. Such inspection systems generally consist of radiation source(s), detectors, control system, image processing system, radiation safety system and other auxiliary devices/facilities. The object of this standard is to define the tests and the relevant testing methods for determining the performance characteristics of the radiographic inspection systems. This standard is not applicable to those cargo/vehicle inspection systems using neutron source radiography, computed tomography or backscatter technology.

Radiation protection instrumentation - Cargo/vehicle radiographic inspection systems

DIN VDE 0493-100:2010 防辐射仪器.第100部分:便携式污染监控组件的定期试验

Radiation protection instrumentation - Part 100: Periodic testing of portable contamination monitoring assemblies

DIN IEC 61559-1:2010 核设施的辐射防护仪器.辐射和/或放射能等级的连续监测用集中式系统.第1部分:一般要求

This standard applies to centralized systems intended for continuous monitoring of radiation and/or levels of radioactivity in nuclear facilities, primarily in support of radiological protection in the working areas. More specifically, it applies to centralized data processing systems, data links, and equipment siting and layout. It also applies to indications displayed locally and centrally, but it does not apply to criticality alarm systems.

Radiation protection instrumentation in nuclear facilities - Centralized system for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements (IEC 61559-1:2009)

DIN IEC 62303:2010 辐射防护仪器.空气中氘的监测用设备(IEC 62303-2008)

This standard specifies requirements and test procedures for equipment intended for simultaneous, delayed or discrete sequential measurement of airborne tritium in the workplace, in gaseous effluents discharged to the environment as well as in the environment itself. Concerning the monitoring of gaseous effluents it refers to the general requirements given in DIN EN 60761-1 (VDE 0493-1-1) and for effluent tritium monitors according to DIN EN 60761-5 (VDE 0493-1-5).

Radiation protection instrumentation - Equipment for monitoring airborne tritium (IEC 62303:2008)

IEC 62438:2010 辐射防护仪器.环境中光子和中子辐射的测量用移动仪器

This International Standard is applicable to mobile radiation detection systems used for the detection, quantification and identification of photon and/or neutron emitters in the environment. This includes point and distributed radiation sources.

Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment

DIN VDE 0493-110:2010 辐射防护仪器.第110部分:安装人员表面污染监测集会的定期测试

The object of the standard is to support the user of installed personnel surface contamination monitoring assemblies with a manufacturer-independent practical guidance for meeting the national legal obligations (health at workplace; occupational safety and health) for periodic testing and quality assurance of radiation protection surveillance.

Radiation protection instrumentation - Part 110: Periodic testing of installed personnel surface contamination monitoring assemblies

ANSI/IEEE 497:2010 核动力发电站用事故监测设备的标准

This standard contains the functional and design criteria for accident monitoring instrumentation for nuclear power generating stations. This standard is intended for new plant designs and for operating nuclear power generating stations desiring to perform design modifications.

Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations

ANSI N42.49A-2010 曝光控制用信号报警电子个人应急辐射探测器(PERDs)性能标准

The scope of this standard is to establish minimum performance criteria and test requirements for four categories of alarming electronic radiation measurement instruments used to manage exposure by alerting the emergency responders when they are exposed to photon radiation. The instruments provide rapid and clear indication of the level of radiation exposure and/or exposure rate and readily recognizable alarms. The alarms are both audible and visual, and distinguishable between exposure rate and exposure. Vibratory alarms are optional. Emergency responders include fire and rescue services, law enforcement and medical services. Other possible users include Critical Inf

Performance Criteria for Alarming Electronic Personal Emergency Radiation Detectors (PERDs) for Exposure Control

IEEE/ANSI N42.47-2010 人类安检用X射线和γ射线系统图像性能测量的美国国家标准

American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans

KS C IEC 60476:2009 核仪器.使用放射源的电测量系统和仪表.通用要求

이 표준은 방사선원을 이용하는 전기 측정계통 및 기기에 적용하고 측정한 물질의 특정한 물리

Nuclear instrumentation－Electrical measuring systems and instruments utilizing ionizing radiation sources－General aspects

KS C IEC 60761-1:2009 气态排出流放射性连续监视设备.第1部分:通用要求

이 표준은 감시의 적합한 형태를 규정하고, 측정 가능범위와 이러한 기기들의 예측할 수 있는

Equipment for continuous monitoring of radioactivity in gaseous effluents－Part 1：General requirements

KS C IEC 60910:2009 早期检测轻水反应堆偏离正常运行工况用的安全壳监测仪表

이 부속서는 정상운전에서의 이탈을 운전원이 진단할 수 있도록 측정 권고사항을 제시한다. 운

Containment monitoring instrumentation for early detection of developing deviations from normal operation in light water reactors

JIS Z 4324:2009 X 与伽玛射线特定范围放射线检测器

Area monitors for X and Gamma rays

DIN IEC 61577-4:2009 辐射防护仪表.氡及氡衰变产品的测量仪器.第4部分:含氡同位素及其衰变产品的基准大气生产设备(STAR)(IEC 61577-4:2009)

Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) (IEC 61577-4:2009)