G00 标准化、质量管理 标准查询与下载

CGA P-37-2009 压缩气体工业用良好环境管理惯例

Industrial gas facilities have distinct activities and associated environmental aspects that can impact the environment. This publication provides good environmental practices at air separation and helium production facilities, hydrogen and carbon monoxide facilities, and carbon dioxide facilities. It also provides good environ- mental practices for truck maintenance and distribution, acetylene manufacturing, cylinder fill operations, specialty gases operations, and customer installation (bulk tanks) activities. The purpose of this publication is to identity typical compressed gas industry activities and associated environ- mental aspects that can have a negative impact on the environment and to identify corresponding practices that can minimize or eliminate those impacts. Environmental aspects can include wastes, discharges, and releases generated at various industrial gas facilities (e.g., solid/hazardous waste, air emissions, wastewater discharges, noise, etc.). For each activity, environmental aspects, potential environmental impacts, and good environmental management practices (GEMP) have been identified that can be used to prevent pollution, minimize the generation of wastes, discharges and releases, and properly manage any residuals.

Good environmental management practices for the compressed gas industry

HJ/T 430-2008 清洁生产标准.电石行业

本标准规定了电石行业清洁生产的一般要求。本标准将清洁生产指标分为六类，即生产工艺与装备要求、资源能源利用指标、产品指标、污染物产生指标（末端处理前）、废物回收利用指标和环境管理要求。 本标准适用于电石生产企业的清洁生产审核、清洁生产潜力与机会的判断、清洁生产绩效评定和清洁生产绩效公告度，也适用于环境影响评价和排污许可证等环境管理制度。

Cleaner production standard.Calcium carbide industry

CGA M-9-2008 对压缩医用气体填充设施的大量气体供应商指纹分析进行维护

This publication provides criteria that medical gas transfill companies can use to satisfy FDA's fingerprinting concerns. It applies to the procurement of bulk medical gas by transfill companies and the requirement that bulk carbon dioxide suppliers provide appropriate certification regarding their product's compliance to current good manufacturing practices (CGMP) and USP specifications.

Maintaining bulk gas supplier fingerprint analysis at compressed medical gas filling facilities

CGA P-11-2008 压缩气体工业用公制实施指南

This publication, along with IEEE/ASTM Sl 10, Standard for Use of the International System of Units (SI): The Modem Metric System, and CSA-Z234.1, Metric Practice Guide, govern: all gases sold and used by the compressed gas industry whether in gaseous or liquid form at the point of sale or use; all vessels, cylinders, and other containers used for packaging, storage, and transportation of these gases; and all ancillary equipment included in the sale and use of these gases.

Metric practice guide for the compressed gas industry

CGA M-5-2008 家用呼吸治疗厂商填充或者分配美国药典(USP)液态氧的指南

This publication is intended to address operations typical to an HRC firm and is not all inclusive. It is primarily intended for firms engaged in the manufacture and distribution of liquid oxygen USP to patients at their resi- dences. Portions of this publication may apply to those HRC firms that also distribute other compressed medi- cal gases (CMG).This publication includes the minimum regulatory requirements that shall be described in an HRC firm's written standard operating procedures (SOPs) for the firm to receive, fill, test, and distribute liquid oxygen USP and includes the following: - establishment and responsibilities of the quality control unit (QCU); - qualifications of the person(s) performing and supervising the receipt, filling, testing, release, and distribu- tion of liquid oxygen USP; - quality records; - building and facility requirements (including vehicles); - manufacturing equipment design and maintenance; - test equipment; - record and report requirements; - use of computer and other electronic equipment; - receipt and testing of vendor-supplied product into the HRC's storage tank; - receipt and testing of vendor-supplied product into vehicle-mounted vessels (VMVs) or other large cryogenic containers; - receipt and testing of vendor-supplied product into cryogenic home vessels (CHVs); - HRC filling and testing of VMVs and/or large cryogenic containers from an HRC company's storage tank; - HRC filling and testing CHVs; and - labeling requirements. This publication is not applicable to the receipt, testing, release, and distribution of high pressure oxygen filled by HRC firms. Firms engaged in filling high pressure medical gas cylinders (either gas-to-gas or liquid-to-gas) should refer to CGA M-2, General Guide for the Manufacturer of Medical Gases Classified as Drugs. This publication is typically not applicable to non-HRC firms unless those firms are engaged in activities similar to those of HRC firms. Non-HRC firms engaged in oxygen USP liquid-to-liquid filling for home care use should also refer to CGA M-2 for additional guidance and potential additional regulatory requirements.

Guide for home respiratory care firms filling or distributing liquid oxygen USP

GOST R 8.632-2007 确保测量一致性的国家体系.确保化学武器的销毁的度量学系统.主要原则

State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles

AWWA M20-2006 水加氯处理或氯胺化处理原则和实践.第2版

This standard describes the essential requirements for the effective protection of source waters.

Water Chlorination/Chloramination Practices and Principles Second Edition

CSA B66-05-2005 预制化粪池和储罐设计、材料和制造要求第六版

Canadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co

Requirements for the design, constituent materials and manufacture of septic tanks and prefabricated retention tanks Sixth Edition

KS M ISO 2718:2004 气相色谱法的化学分析标准编制

이 절은 조사 연구 또는 표준의 주제, 그리고 특히, 제시된 방법의 적용 분야에 대한

Standard layout for a method of chemical analysis by gas chromatography

IPC TM-650 2.4.1-2004 胶带附着力试验 修订本E

aterial in this Test Methods Manual was voluntarily established by Technical Committees of the IPC. This material is advisory only and its use or adaptation is entirely voluntary. IPC disclaims all liability of any kind as to the use, application, or adaptation of this material. Users are also wholly responsible for protecting themselves against all claims or liabilities for patent infringement. Equipment referenced is for the convenience of the user and does not imply endorsement by the IPC.

Adhesion, Tape Testing Revision E

HJ/T 154-2004 新化学物质危害评估导则

本标准规定了新化学物质危害性评估的数据要求、评估方法、分级标准、评估结论的编写等事项。 本标准适用于新化学物质申报中的专家评审和申报人的自评。

The guidelines for the hazard evaluation of new chemical substances

CNCA 03C-027-2001 机动车辆轮胎类强制性认证实施规则 轮胎产品

本规则适用的产品范围为：轿车子午线轮胎、轿车斜交轮胎、载重汽车斜交轮胎、载重汽车子午线轮胎、摩托车轮胎。

Implementation Rules for Compulsory Certification of Motor Vehicle Tires Tire Products

AWWA M19-2001 水效用管理紧急情况计划.第4版

This standard describes the critical requirements for the effective operation and management of drinking water distribution systems.

Emergency Planning for Water Utility Management Fourth Edition

CSA B66-00-2000 预制潴留池和化粪池.第5版.通用指令第1号

Fosses Septiques Et Bassins De Retention Prefabriques Cinquieme Edition; Fiche No 1

Prefabricated Retention Tank and Septic Tank.Fifth Edition.General Insruction No 1

IPC TM-650 2.4-1998 力学性能测试方法 修订本R

Material in this Test Methods Manual was voluntarily established by Technical Committees of the IPC. This material is advisory only and its use or adaptation is entirely voluntary. IPC disclaims all liability of any kind as to the use, application, or adaptation of this material. Users are also wholly responsible for protecting themselves against all claims or liabilities for patent infringement. Equipment referenced is for the convenience of the user and does not imply endorsement by the IPC.

Mechanical Test Methods Revision R

HG 20237-1994 化学工业工程建设交工技术文件规定

1.O.1 为统一化工行业工程建设交工技术文件的内容和格式，促进企业加强管理，提高质量控制水平，特制订本标准。 1.0.2 本标准适用于下列范围： 1.O.2.1 化工行业的新建、扩建、改建、技术改造工程； 1.0.2.2 工程的交工技术文件应是从工程开始施工到工厂全部装置预试车完成，施工单位移交给建设单位的技术文件； 1.0.2.3 化工行业机械、管道、电气、自动化仪表等安装工程交工技术文件格式及内容。 1，O.3 建筑工程交工技术文件格式和内容，应按国家现行标准的规定执行。 1.O.4 锅炉、压力容器组装(或制造)交工技术文件的格式、内容，应按国家的现行标准和劳动部的规定执行。 1.O.5 工程质量检验评定的交工技术文件格式和内容应按国家的现行标准《建筑安装工程质量检验评定标准》和《工业安装工程质量检验评定标准》的有关规定执行。

Provisions on Technical Documents for Construction Handover of Chemical Industry Engineering

IPC TM-650 2.4.4-1994 抗折强度复合材料(在常温下) 修订本B 1994年12月

Flexural Strength of Laminates (at Ambient Temperature); Revision B - December 1994

Flexural Strength of Laminates (at Ambient Temperature); Revision B - December 1994

IPC TM-650 2.4.4.1-1994 抗折强度复合材料(高温) 修订本C 1994年12月

Flexural Strength of Laminates (at Elevated Temperature); Revision A - December 1994

Flexural Strength of Laminates (at Elevated Temperature); Revision A - December 1994

HG/T 2541-1993 标准化工作导则有机化工标准编写细则

本标准规定了有机化工标准编写的基本要求，标准的构成、条文的编排及其编写细则。 本标准适用于有机化工国家标准、行业标准的编写。编写有机化工地方标准、企业标准亦可参照使用。

Standardization Work Guidelines Organic Chemical Industry Standard Compilation Rules

HG 20236-1993 化工设备安装工程质量检验评定标准

1.O.1 为统一化工设备安装与现场组焊工程的质量检验和评定方法，为加强工程质量管理、确保工程质量，特制定本标准。 1.O.2 本标准适用于化工行业中的高压设备安装工程、常压设备与真空设备安装工程、中低压设备安装及现场组焊工程、塔类设备安装及现场组焊工程的质量检验和评定。不适用于球形容器、湿式气柜、立式圆筒形钢制贮罐安装及现场组焊工程的质量检验和评定。 1.0.3 本标准按设备的类别编制，其质量指标和要求，应与下列现行的标准规范配套使用： 《高压化工设备施工及验收规范》； 《中低压化工设备施工及验收规范》； 《化工塔类设备施工及验收规范》； 《现场设备、工业管道焊接工程施工及验收规范》。 检验和评定，应根据设备类别，分别按安装工程、现场组焊工程两个分部工程进行。在进行设备工程的质量检验和评定时，除应符合本标准的有关规定外，尚应符合现行国家标准《工业安装工程质量检验评定统一标准》的规定。 1.O.4 设备工程施工时，应执行相应的技术标准、设计文件的规定，并与工程同步做好施工记录；设备工程竣工时，应按本标准进行质量检验和评定，并及时办理质量检验和评定签证。

Standards for Quality Inspection and Evaluation of Chemical Equipment Installation Engineering