标志、包装、运输、贮存标准-分析测试百科网

ASTM D7123-04 HCFC混合料B(CF3CCl 2H、 Ar和CF4)的搬运、运输和储存的标准实施规程

1.1 This practice covers guidance and direction to suppliers, reclaimers, purchasers, and users in the handling, transportation, and storage of HCFC Blend B.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)

ICS: 71.080.20 (Halogenated hydrocarbons)
CCS: G08
发布: 2004
实施

DB35/ 343-1999 可降解聚乙烯薄膜包装袋

本标准规定了可降解聚乙烯薄膜、包装袋的技术要求，试验方法，检验规则，标志及标签、使用说明书和包装、运输、贮存。本标准适用于以聚乙烯树脂为原料，加入适量的可降解塑料母料，用吹塑法生产的，经加工制成的可降解聚乙烯薄膜或经封口制成的可降解聚乙烯薄膜包装袋；也适用于流涎法（未拉伸）生产的可降解聚乙烯薄膜。但不包括聚乙烯农、地膜。

Degradable polyethylene film packaging bag

ICS
CCS: G08
发布: 1999-10-15
实施: 1999-10-15

ASTM D6268-98(2003) HFC-125五氟乙烷(C₂HF₅)的搬运、运输和存储的标准实施规程

This practice provides requirements for the handling, transportation, and storage of HFC-125 encountered in distribution through both commercial and military channels. It is intended to insure that HFC-125 is handled, transported, and stored in such a way its physical properties are not degraded. Transport may be by various means, such as, but not limited to, highway, rail, water, and air.1.1 This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-125, pentafluoroethane (C2HF5). 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C₂HF₅)

ICS: 71.080.20 (Halogenated hydrocarbons)
CCS: G08
发布: 1998
实施

ASTM D6268-98 HFC-125五氟乙烷(C₂HF₅)的搬运、运输和存储的标准实施规程

1.1 This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-125, pentafluoroethane (C2HF5). 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C₂HF₅)

ICS: 71.080.20 (Halogenated hydrocarbons)
CCS: G08
发布: 1998
实施

BS 7948-1:1997 包装橡胶包用薄膜.不可剥拆的高熔点薄膜

This Part of BS 7948 specifies the material and physical property requirements for non-strippable high melting point film for wrapping natural and general purpose synthetic rubber bales, intended to keep the bales separate during storage.

Films for wrapping rubber bales - Non-strippable high melting point films

ICS: 55.040;83.140.10
CCS: G08
发布: 1997-03-15
实施: 1997-03-15

WJ 2391-1997 火炮涂油和油封技术要求

Artillery Oiling and Oil Seal Technical Requirements

ICS
CCS: G08
发布: 1997
实施

WJ 2383-1997 固体推进剂包装用木箱通用规范

General specification for wooden boxes for solid propellant packaging

ICS
CCS: G08
发布: 1997
实施

ASTM D4266-96(2001) 粉状离子交换树脂预涂覆能力的标准试验方法

The salt removal capacity of a powdered resin precoat is limited by the capacity of either the anion-exchange resin or the cation-exchange resin contained in it. Applications include condensate polishing in fossil-fueled electric generating plants, as well as condensate polishing, spent fuel pool water treatment, reactor water treatment, and low-level radioactive liquid waste treatment in nuclear-powered electric generating plants. By determining the ion-exchange capacity profile of either a cation exchange resin or an anion-exchange resin (capacity expended per unit of time under specific conditions), it is possible to estimate runlength and remaining capacity when treating a liquid of the same makeup. Although they cannot accurately predict performance during condenser leaks, these test methods are useful for determining operating capacities as measured under the test conditions used. These test methods may be used to monitor the performance of either powdered anion-exchange resin or powdered cation-exchange resin. The total capacity of either resin depends primarily upon the number density of ion-exchange sites within the resin. The operating capacity is a function of the total capacity, degree of conversion to the desired ionic form when received, and properties of the resin and the system that affect ion exchange kinetics.1.1 These test methods cover the determination of the operating ion-exchange capacity of both powdered cation-exchange resins (hydrogen form) and powdered anion-exchange resins (hydroxide form). These test methods are intended for use in testing new powdered ion-exchange resins when used for the treatment of water. The following two test methods are included: SectionsTest Method A-Operating Capacity, Anion-Exchange Resin, Hydroxide Form7-15 Test Method B-Operating Capacity, Cation-Exchange Resin, Hydrogen Form16-24 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins

ICS: 71.100.40 (Surface active agents)
CCS: G08
发布: 1996
实施

ASTM D1849-95(2008) 涂料包装耐久性的标准试验方法

1.1 This test method covers the change in consistency and certain other properties that may take place when liquid paint of either the solvent-reducible or water-reducible type is stored at a temperature above 0°C (32°F). 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Package Stability of Paint