共找到 1599 条与 合成树脂、塑料 相关的标准,共 107 页
本标准适用于不饱和聚酯树脂80℃下反应活性的测定。
Unsaturated polyester resin--Determination of reactivity at 80 Centigrade
本标准适用于测定以苯乙烯作交联剂的不饱和聚酯树脂的固体含量。
Unsaturated polyester resin--Determination of solid content
本标准适用于不饱和聚酯树脂羟值的测定。
Unsaturated polyester resin--Determination of hydroxyl value
本标准适用于用旋转粘度计测定液体不饱和聚酯树脂的绝对粘度。
Unsaturated polyester resin determination of viscosity
本标准适用于测定树脂整理剂的比重。
Resin finishing agent--Testing method for specific gravity
本标准适用于树脂整理剂的折射率的测定。
Resin finishing agent--Testing methods for refractive index
Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
本标准规定了用体积排斥色谱法(SEC)测定聚苯乙烯标准样品的分子量及分子量分布的方法。适用的分子量范围为2×10~3×10g.mol。 本方法也可作 其他高聚物体系的通用方法。用于不同类型的高聚物时,溶剂和柱填料体系等应另作规定。
Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
本标准规定了用小角激光光散射(LALLS)法测定聚苯乙烯标准样品重均分子量的绝对方法。本标准适用于分子量大于3×10g.mol的样品,也适用于一般在常温下能溶于甲苯的均聚物。
Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
本标准规定了环氧树脂、缩水甘油酯和1-氯-2,3-环氧丙烷中易皂化氯的测定方法。得到的值表示这些化合物中氯代醇基的易皂化氯浓度。
Epoxide resins and related materials--Determination of easily saponifiable chlorine
本标准规定了用丙酮在其沸点附近从磨细的酚醛模塑制品试样中,测定可抽提物数量的重量法。丙酮可溶物试验是一种测定由酚醛模塑料制成酚醛模塑制品相对固化度的方法。抽提过程应在指定条件下,于规定时间内进行。虽然测定了可溶物的大部分,但抽提作用不一定完全,其结果仅是一个比较的结果,因为抽提物常常含有未固化树脂以外的物质(如润滑剂、着色剂和增塑剂)。
Phenolic mouldings--Determination of acetone-soluble matter
本标准规定了能用丙酮在其沸点附近从颗粒的酚醛模塑料中,测定抽提物数量的重量法。 本方法仅适用于以线型酚醛树脂为基材的模塑料,而不适用于以甲阶酚醛树脂为基材的模塑料, 因为后一类的树脂不能完全溶于丙酮。
Phenolic moulding materials--Determination of acetone soluble matter(apparent resin content of material in the unmoulded state)
本标准是用液上气相色谱法测定聚氯乙烯(PVC)树脂中残留氯乙烯单体(RVCM)含量的方法。适用于氯乙烯(VC)均聚物、共聚物树脂及其制品中残留氯乙烯单体的测定。 本方法最低检出量为0.5mg/kg。 用固上气相色谱法测定聚氯乙烯树脂中残留氯乙烯单体含量的方法见附录A。
Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
Determination of residual styrene monomer in polystyrene by gas chromatography
本标准规定了一种直接电位滴定法,以测定环氧树脂和缩水甘油酯中的无机物,也叫无机氯或“离子氯”。
Epoxide resins and glycidyl esters--Determination of inorganic chlorine
本标准规定了测定环氧当量的方法。此方法适用于所有的环氧化合物;对环氧胺来说,则需要使用在附录A(补充件)中规定的修正方法。
Epoxide compounds--Determination of epoxide equivalent
Test method for friction and wear of plastics by sliding
本标准适用于测定不饱和聚酯树脂的酸值。在树脂中存在游离酸酐时,由于生成不能测定的羧酸酯沉淀,测得的值会比理论值稍低。
Determination for acid value of unsaturated polyester resins
本方法适用于聚丙烯等规指数的测试。 在本方法测试条件下,等规指数规定为不溶于沸腾正庚烷的聚丙烯重量占试样重量的百分数。
Polypropylene--Method of determination of normal indices
Polychloroether resin dilute solution viscosity test method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号