G38 胶粘剂基础标准与通用方法 标准查询与下载
共找到 1232 条与 胶粘剂基础标准与通用方法 相关的标准，共 83 页
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-11-16
- 实施
- 2013-11-16
이 표준은 천연 잔디의 대용품으로 합성섬유를 소재로 하여 만든 인조 잔디 가운데 인조 잔디 파일틈에 입상재료를 충전해 파일을 안정화하기 위한 충전재, 인조 잔디 복합제품 및 충격 흡수 패드를사용한 충전 또는 무충전 형태의 인조 잔디에 대하여 규정한다. 다만, 인조 잔디의 용도는 학교 생활체육 시설에 대하여 규정한다.
School athletic facilities－Artificial turf
- ICS
- 59.080.20
- CCS
- G38
- 发布
- 2013-11-14
- 实施
- 2013/11/14
This International Standard specifies a method for the determination of the shear strength of anaerobiccuring liquid adhesives used for retaining cylindrical assemblies, pin-and-collar type, or for locking and sealing threaded fasteners. This test method can also be used for other adhesives. The test is for ranking and quality control of adhesives. The result does not necessarily reflect the performance of the materials in service and the test is not suitable for providing numerical data for design purposes. NOTE Numerical design data can be obtained from tests using the materials and configurations used in the actual structure.
Adhesives.Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-11
- 实施
Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-10-31
- 实施
- 2013-10-31
Adhesives. Emulsion polymerized isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-10-31
- 实施
- 2013-10-31
Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures; German version EN 14227-3:2013
- ICS
- 93.080.20
- CCS
- G38
- 发布
- 2013-08
- 实施
Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures; German version EN 14227-5:2013
- ICS
- 93.080.20
- CCS
- G38
- 发布
- 2013-08
- 实施
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures; German version EN 14227-1:2013
- ICS
- 93.080.20
- CCS
- G38
- 发布
- 2013-08
- 实施
Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-08
- 实施
Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in severe environments
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06-30
- 实施
- 2013-06-30
Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in non-severe environments
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06-30
- 实施
- 2013-06-30
This part of ISO 26842 gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations for use in wood products placed in severe environments, in which the products are exposed to extreme change of temperature and humidity. A series of exposure cycles at various temperature and humidity values is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination. This part of ISO 26842 is intended to help the user not only to select a suitable adhesive, but also to evaluate adhesives and adhesively bonded wood products. NOTE When actual wood products are tested using this method, the test results might not be comparable because the test laboratory will not normally have had adequate control over the way the product was assembled. This part of ISO 26842 is not intended for use in the qualification of structural components.
Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2: Resistance to delamination in severe environments
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06-01
- 实施
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2013
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06
- 实施
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions; German version EN 302-6:2013
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06
- 实施
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength; German version EN 302-4:2013
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06
- 实施
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2013
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06
- 实施
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength; German version EN 302-1:2013
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-06
- 实施
Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-05-31
- 实施
- 2013-05-31
Adhesives for load-bearing timber structures - Test methods - Part 2: determination of resistance to delamination
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-05-17
- 实施
- 2013-05-17
Adhesives for load-bearing timber structures - Test methods - Part 3: determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
- ICS
- 83.180
- CCS
- G38
- 发布
- 2013-05-17
- 实施
- 2013-05-17
