G44 胶乳制品 标准查询与下载

JIS T 8112:2014 电工用绝缘橡胶手套

Gloves of insulating material used for electrical working

BS ISO 18752:2014 橡胶软管和软管总成. 液压应用线或织物增强单压类型. 规范

Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification

BS ISO 124:2014 乳胶, 橡胶. 总固体含量的测定

Latex, rubber. Determination of total solids content

ISO 17403:2014 橡胶. 采用滴定法测定领域及浓缩天然橡胶胶乳的镁含量(无氰法)

This International Standard specifies a cyanide-free titration method for the determination of the magnesium content in field and concentrated natural rubber latex.

Rubber - Determination of magnesium content of field and concentrated natural rubber latices by titration (cyanide-free method)

DIN ISO 127:2014 天然浓缩橡胶乳胶. 氢氧化钾值的测定 (ISO 127-2012)

Rubber, natural latex concentrate - Determination of KOH number (ISO 127:2012)

ISO 124:2014 胶乳, 橡胶. 固态物质总含量的测定

This International Standard specifies methods for the determination of the total solids content of natural rubber field and concentrated latices and synthetic rubber latex. These methods are not necessarily suitable for latex from natural sources other than the Hevea brasiliensis, for vulcanized latex, for compounded latex, or for artificial dispersions of rubber.

Latex, rubber - Determination of total solids content

ISO 10282:2014 一次性无菌外科橡胶手套. 规范

This International Standard specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. It covers gloves with smooth surfaces and gloves with textured surfaces over part or the whole glove. This International Standard is intended as a reference for the performance and safety of rubber surgical gloves. The safe and proper usage of surgical gloves and sterilization procedures with subsequent handling, packaging, and storage procedures are outside the scope of this International Standard.

Single-use sterile rubber surgical gloves - Specification

ISO 14285:2014 餐饮服务用橡胶和塑料手套.可榨出物质的限制

This International Standard specifies limits for extractable chemical substances for Single-use gloves made from natural rupben Synthetic rubben or plastic materials that are intended for use in food preparation, food handling, and related application in food service industry. This International Standard does not cover the Specification for extractable biological substances and physical requirements of the gloves. It is not applicable to gloves used under extreme conditions Such as those having pHlessthan 45 and/ortemperature above 40 "C.This International Standard does not Cover gloves being exposed to fat and oil foods. NOTE The physical reduirements specified for gloves could be found in related International Standards, for example, ISO 11193-L1 and ISO 11193-2， This International Standard does not cover Safe and proper application of the gloves with Supsequent handling, packaging, and Storage procedures.

Rubber and plastics gloves for food services - Limits for extractable substances

BS ISO 25841:2014 女性用安全套. 要求和试验方法

Female condoms. Requirements and test methods

ISO 25841:2014 女性用安全套. 要求和试验方法

Female condoms - Requirements and test methods

ASTM D1051-14 橡胶绝缘套管的标准规范

1.1 This specification covers manufacturing and testing of rubber insulating sleeves for protection of workers from electrical shock. 1.2 Two types of sleeves are provided and are designated as Type I, nonresistant to ozone, and Type II, resistant to ozone. 1.3 Five classes of sleeves, differing in electrical characteristics, are provided and are designated as Class 0, Class 1, Class 2, Class 3, and Class 4. 1.4 Two styles of sleeves, differing in configuration, are provided and are designated as Style A, straight taper, and Style B, curved elbow. 1.5 The values stated in SI units are to be regarded as the standard. See IEEE/ASTM SI 10. 1.6 The following safety hazards caveat pertains only to the test methods portion, Sections 16 – 19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazards statements are given in 18.2.

Standard Specification for Rubber Insulating Sleeves

ASTM D120-14 橡胶绝缘手套的标准规范

1.1 This specification covers manufacturing and testing of rubber insulating gloves for protection of workers from electrical shock. 1.2 Two types of gloves are provided and are designated as Type I, non-resistant to ozone, and Type II, resistant to ozone. 1.3 Six classes of gloves, differing in electrical characteristics, are provided and are designated as Class 00, Class 0, Class 1, Class 2, Class 3, and Class 4. 1.4 The values stated in SI units are to be regarded as standard. See IEEE/ASTM SI 10. 1.5 The following safety hazards caveat pertains only to the test method portion, Sections 16, 17, 18, and 19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precaution statements, see 18.2.

Standard Specification for Rubber Insulating Gloves

ASTM C834-14 乳胶密封剂的标准规格

8.1 This specification covers two types and three grades of latex sealants as described in Section 4 that are formulated for general caulking and sealing operations in building construction. It should be recognized by the user that not all sealants meeting this specification are suitable for all applications and all substrates. It is essential, therefore, that the type and grade be specified for proper description of a sealant. Test methods relate to special standard substrates of glass, wood and aluminum. If tests are required using substrates in addition to or other than standard, they should be so specified for testing. 8.2 Refer to Guide C1193 for information on the proper use of sealants meeting this specification. 1.1 This specification covers one component latex sealants used for sealing joints in building construction. 1.2 A sealant meeting the requirements of this specification shall be classified by the manufacturer to be one of the types and grades defined in Section 4. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound in parenthesis are provided for information purposes only. 1.4 The following precautionary caveat pertains only to the test method portion, Section 10, of this Specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: Currently, there is no ISO standard similar to this specification.

Standard Specification for Latex Sealants

KS M ISO 4074:2013 天然乳胶避孕套.要求和试验方法

이 표준은 성병 예방과 피임을 목적으로 소비자에게 공급되는 천연 라텍스 고무로 만들어진 콘돔의시험방법과 최소 요구사항에 대하여 규정한다.

Natural latex rubber condoms ― Requirements and test methods

DIN ISO 1652:2013 橡胶胶乳. 采用布洛氏布洛克菲尔德试验法测定表观粘度 (ISO 1652-2011)

This International Standard specifies a method for the determination of the apparent viscosity of both natural rubber latex concentrate and synthetic rubber Iatices by the Brookfield method. The method is also suitable for the determination of the viscosity of natural Iatices from sources other than Hevea brasiliensis and also for compounded latices. Other methods for the determination of viscosity are referred to in Annex A.

Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2011)

ASTM D6976-13 橡胶避孕用具的标准规范; 女用安全套

1.1 This specification covers requirements for contraceptive vaginal diaphragms, hereafter called diaphragms. 1.2 Vaginal barrier devices known as cervical caps, vaginal sponges and female condoms are not included in this specification.

Standard Specification for Rubber Contraceptivesmdash;Vaginal Diaphragms

HG/T 3054-2012 胶乳海绵线性尺寸测定

本标准规定了胶乳海绵线性尺寸测定的方法。本标准适用于以天然胶乳、合成胶乳为主要原料制成的海绵制品或试样的线性尺寸的测量。

Latex foam-Determination of linear dimensions

HG/T 3055-2012 胶乳海绵表观密度测定

本标准规定了胶乳海绵表观密度测定的方法。本标准适用于以天然胶乳、合成胶乳为主要原料制成的海绵制品表观密度的测量。

Latex foam-Determination of apparent density

HG/T 2723-2012 胶乳彩色气球

本标准规定了胶乳彩色气球(以下简称气球)的材料、技术要求、检验规则、标志、包装、运输和贮存。本标准适用于天然胶乳制成的用于节日庆祝、广告宣传和儿童玩乐等10 g以内的各种形状、花纹、色彩、图案的气球。

Colorful rubber latex balloon

KS M ISO 11089:2012 合成生胶.用高效液相色谱法测定抗降解剂

이 표준은 합성원료 고무에서 다음과 같은 분해방지제의 측정을 위한 시험방법을 규정한다.

Rubber, raw synthetic－Determination of antidegradants by high-performance liquid chromatography