G47 其他橡胶制品 标准查询与下载

HG/T 2296-1992 彩色电视机用橡胶楔子

Rubber wedges for color television

HG/T 2295-1992 彩色电视机用导热橡胶垫片

Heat conduction rubber gasket for color TV

HG/T 2294-1992 彩色电视机用橡胶高压帽

Rubber high voltage cap for color TV

HG/T 2290-1992 橡胶篮球、排球、足球

Rubber basketball, volleyball, football

HG/T 2329-1992 拖拉机挠性万向节橡胶衬套

Tractor flexible universal joint rubber bushing

DIN 4000-64:1992 光滑的未画出轮廓图的缸体的产品特性图表

Tabular layouts of article characteristics make it possible that standardized and non-standardized articles which are similar to each other can be grouped, fined and selected. This standard deals with following groups of articles: smooth, unprofiled cylinders.

Tabular layouts of article characteristics for smooth, unprofiled cylinders

BS 7442 Sec.3.3:1992 橡胶或塑料被覆的辊子.第3部分:试验方法.第3节:用普西和琼斯法测定表面硬度

Rubber or plastics covered rollers. Methods of test. Determination of apparent hardness by the Pusey and Jones method

HG 2012-1991 磨机橡胶衬里技术条件

本标准规定了磨机橡胶衬里的技术要求、试验方法、验收规则及对标志、包装、运输和贮存的要求。 本标准适用于陶瓷、建材、化肥、化工矿山、冶金矿山等行业的磨机橡胶衬里。衬里为磨机的耐磨防护层，同时起传递能量的作用。

Mill Rubber Lining Specifications

ISO 10069-2:1991 冲压工具 弹性体压缩弹簧 第2部分:附件规范

Specifies the dimensions of spring collars and pilot pins. Gives information concerning materials and their hardness. Establishes the designation of spring collars and pilot pins.

Tools for pressing; elastomer pressure springs; part 2: specification of accessories

ISO 10069-1:1991 冲压工具 弹性体压缩弹簧 第1部分:一般规范

Specifies the dimensions of pressure springs and the diameters of its counterbores. Gives information concerning materials and their hardness. Establishes the designation of springs together with the marking of packages. Annex A is for information only.

Tools for pressing; elastomer pressure springs; part 1: general specification

HG/T 2011-1991 橡胶热水袋

rubber hot water bottle

HG/T 2010-1991 橡胶球胆

Rubber bladder

ARMY MIL-D-51533 A-1991 M13型14升便携式去污器

This specification covers one type of assembled decontaminating apparatus(see 6.1).

DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13

ARMY MIL-D-51559-1991 M13(练习)14升便携式去污器

This specification covers one type of assembled practice decontaminating apparatus(see 6. i).

DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13 (PRACTICE)

ISO 2231:1989 橡胶或塑料涂覆织物 状态调节和试验的标准环境

Specifies the requirements and definitions and determines pre-conditioning, characteristics of test atmospheres and methods of conditioning. Technical revision of the clauses 3 and 4 of the first edition (ISO 2231-1973).

Rubber- or plastics-coated fabrics; standard atmospheres for conditioning and testing

ISO 8096-2:1989 雨衣用的橡胶或塑料涂覆的织物 规范 第2部分:聚氨基甲酸乙酯和有机硅弹性体涂覆织物

Rubber- or plastics-coated fabrics for water-resistant clothing; specification; part 2: polyurethane- and silicone elastomer-coated fabrics

ISO 6123-2:1988 橡胶或塑料涂覆胶辊 规范 第2部分:表面特性

Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. Establishes a classification according to surface quality or imperfections and surface finish. A test method for the determination of surface roughness is also described. - Part 1 of this standard deals with the requirements for hardness, part 3 with dimensional tolerances. - Replaces the first edition by expanding to include an additional section (sub-clause 4.3) and an annex giving the relationship betwen surface treatment and surface roughness.

Rubber- or plastics-covered rollers; specifications; part 2: surface characteristics

BS 3735:1987 塑料和橡胶吸尘箱盖规范

Thermoplastics and rubber lids suitable for use with dustbins complying with BS 4998 or BS 792.

Specification for plastics and rubber dustbin lids

DIN 7868-3:1986 橡胶和塑料涂层辊子.第3部分:尺寸公差和形位公差

This standard specifies the dimensional and geometrical tolerances of rubber and plastics covered rollers, and the test method.#,,#

Rubber and plastics covered rollers; dimensional and geometrical tolerances

ISO 6123-3:1985 橡胶或塑料涂覆胶辊 规范 第3部分:尺寸公差

Specifies classes of dimensional tolerances and test methods for the measurement of dimensions. Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 1 and 2 of this standard deal with the requirements for hardness, and the surface characteristics.

Rubber- or plastics-covered rollers; Specifications; Part 3 : Dimensional tolerances