G47 其他橡胶制品 标准查询与下载

HG/T 3077-1999 橡胶、塑料辊硬度要求

本标准规定了胶辊的硬度要求。

Requirements for hardness of rubber or plastics covered rollers

JIS K 6779:1999 聚丁烯(PB)管接头

Polybutene (PB) pipe fittings

HG/T 2868-1997 变压器用橡胶隔膜

本标准规定了变压器用橡胶隔膜(简称隔膜--下同)的技术要求、抽样和试验方法及标志、包装、运输、贮存等。 本标准适用于工作温度为-40℃～90℃。用橡胶涂覆织物制成的各类变压器用隔膜。

Rubber diaphragm for transformer

HG/T 2866-1997 橡胶护舷

本标准规定了橡胶护舷的技术要求、试验方法、检验规则、包装、标志、运输与 贮存等项内容。适用于以橡胶护舷本体形状变形为主、吸收船舶冲击能量的中空式压缩型橡胶护舷。

Rubber fender

HG/T 2886-1997 橡胶水坝

Rubber Dam

HG/T 2887-1997 变压器用橡胶材料

Rubber material used for tramsfomer

ASTM D5963-97a(2001) 由耐磨性橡胶制成的旋转滚筒式研磨机的标准试验方法

1.1 This test method covers the measurement of abrasion resistance of vulcanized rubbers that are subject to abrasive/frictional wear in actual service. The abrasion resistance is measured by moving a test piece across the surface of an abrasive sheet mounted to a revolving drum and is expressed as volume loss in mm, that is, a smaller number indicates better resistance to abrasion. 1.2 Test results obtained by this test method shall not be assumed to represent the wear behavior of rubber products experienced in actual service. 1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber8212;Property Abrasion Resistance (Rotary Drum Abrader)

ASTM D5963-97a 由耐磨性橡胶制成的旋转滚筒式研磨机的标准试验方法

1.1 This test method covers the measurement of abrasion resistance of vulcanized rubbers that are subject to abrasive/frictional wear in actual service. The abrasion resistance is measured by moving a test piece across the surface of an abrasive sheet mounted to a revolving drum and is expressed as volume loss in mm, that is, a smaller number indicates better resistance to abrasion. 1.2 Test results obtained by this test method shall not be assumed to represent the wear behavior of rubber products experienced in actual service. 1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber8212;Property Abrasion Resistance (Rotary Drum Abrader)

BS ISO 6916-1:1996 柔性多孔聚合材料.海绵和膨胀的多孔橡胶制品.第1部分:压片

Classifies flexible sponge and expanded cellular rubber products. Base material used in their manufacture may be natural rubber, reclaimed rubber or synthetic rubber, either alone or in combination. Does not apply to latex foam rubbers, shoe soling, ebonite cellular rubbers, semi-rigid urethane foams, PVC or PVC blended with other polymers. All products are in the form of sheeting.

Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Sheeting

HG 2793-1996 工业用导电和抗静电橡胶板

本标准规定了工业用导电和抗静电橡胶板的产品分类、技术要求、试验方法、验收规则和标志，包装、运输与贮存等。 本标准适用于在需要采取预防措施来防止静电积累的场所，对人员和物体放电起到安全防护作用的导电和抗静电橡胶板。

Conductive and antistatic rubber sheets for industrial use

HG/T 2794-1996 电视机屏橡胶研磨盘

本标准规定了电视机屏橡胶研磨盘的分类、结构与规格、产品标记，技术要求、试验方法、检验规则、标志、包装、运输、贮存等项内容、适用于对电视机玻璃屏面进行粗磨加工的橡胶研磨盘。

TV screen rubber grinding disc

HG/T 2795-1996 电视机屏橡胶研磨滚筒

TV screen rubber grinding roller

ISO 6916-1:1995 软质泡沫聚合材料 膨松泡沫和海绵多孔橡胶制品 规范 第1部分:薄片

Classifies flexible sponge and expanded cellular rubber products. Base material used in their manufacture may be natural rubber, reclaimed rubber or synthetic rubber, either alone or in combination. Does not apply to latex foam rubbers, shoe soling, ebonite cellular rubbers, semi-rigid urethane foams, PVC or PVC blended with other polymers. All products are in the form of sheeting.

Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting

HG/T 2699-1995 车辆蓄电池用硬质橡胶技术条件

本标准规定了铅酸蓄电池用硬质橡胶树料的技术要求、试验方法、检验规则、标志、包装、运输和贮存的要求。 本标准适用于机动车辆和工程机械中，工作温度-50～60℃的铅酸蓄电池用硬质橡胶材料。

Specifications for hard rubber for vehicle batteries

HG/T 2698-1995 设备防腐衬里用橡胶板

本标准规定了设备防腐采用的几种橡胶衬里胶板的分类、规格尺寸、技术要求、试验方法、验收规则以及标志、包装、运输与贮存等内容。 本标准适用于设备防腐衬里用橡胶板。

Rubber sheet for equipment anti-corrosion lining

ARMY MIL-D-51559 NOTICE 1-1995 M13(练习)14升便携式去污器

MIL-D-51559(EA) is inactive for new design and is no longer used except for replace-ment purposes.

DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13 (PRACTICE)

ARMY MIL-D-51533 A NOTICE 1-1995 M13型14升便携式去污器

This notice should be filed in front of MIL-D-51533A(EA),dated 10 October 1991, with Amendment 1, dated 16 March 1993.

DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13

BS 7442 Sec.4.2:1994 橡胶或塑料包覆的辊筒.规范.第2部分:表面光洁度的要求和分类

Rubber or plastics covered rollers. Requirements. Classification by surface finish

NF T48-109:1994 密封用石棉和橡胶压缩薄板.烘箱的加速老化试验

Asbestos and rubber compressed sheets for seals. Accelerated ageing test on oven.

NF T48-101:1994 密封用石棉和橡胶压缩薄板.尺寸的测量

Asbestos and rubber compressed sheets for seals. Measurement of dimensions.