G70 化学助剂基础标准与通用方法 标准查询与下载

DLA A-A-1281 A VALID NOTICE 1-2003 (粒子)集油吸附剂

A-A-1281A, dated 31 March 1989, has been reviewed and determined to be valid for use in acquisition

SORBENT, OIL (PARTICULATE)

DLA A-A-1280 B VALID NOTICE 1-2003 (轧辊清扫垫)集油吸附剂

A-A-1280B, dated 9 March 1995, has been reviewed and determined to be valid for use in acquisition

SORBENT, OIL (ROLL, SWEEP, PAD)

DLA A-A-1282 A VALID NOTICE 1-2003 (内附)集油吸附剂

A-A-1282A, dated 31 March 1989, has been reviewed and determined to be valid for use in acquisition

SORBENT, OIL (ENCLOSED)

SY/T 5277-2000 油田堵水剂分类及代号编制方法

本标准规定了油田堵水剂(含油井堵水剂和注水井调剖剂)分类及代号、主剂原料代号及油田堵水剂代号编制方法。 本标准适用于油田堵水剂分类及代号编制。

Classification and coding method for water shutoff agents used in oil field

DLA MIL-PRF-25567 E-1998 氧系统密闭性检查化合物

This specification covers two types of a gas leak detection compound that is compatible with oxygen. The leak detection compound is intended for use in detecting leaks in both high- and low-pressure oxygen systems in aircraft and other related oxygen systems.

LEAK DETECTION COMPOUND, OXYGEN SYSTEMS

DLA A-A-1280 B-1995 (轧辊清扫垫)集油吸附剂

This CID covers oil sorbents for pickup of small oil spills.

SORBENT, OIL (ROLL, SWEEP, PAD)

ASTM G127-95(2008) 氧气装置用清洗剂的选择标准指南

The purpose of this guide is to provide information that may be considered when selecting and qualifying a cleaning agent for an oxygen system. Insufficient cleanliness can result in the ignition of contaminants or components by a variety of mechanisms. Therefore, an acceptable level of contamination for each condition of use in oxygen service should be defined. The acceptable level of contamination may depend on various factors, such as: The nature and type of the contaminants, The location and degree of contamination, The type of substrate material, The configuration and end use of the equipment or part to be cleaned, and The operating parameters of the oxygen system (pressure, temperature, phase, concentration, fluid velocity, etc.).1.1 The purpose of this guide is to establish a procedure to select cleaning agents, both solvents and water-based detergents, for oxygen service. This includes of laboratory-scale tests for cleaning effectiveness, materials compatibility and oxygen compatibility. 1.2 The effectiveness of a particular cleaning agent depends upon the method by which it is used, the nature and type of the contaminants, and the characteristics of the article being cleaned, such as size, shape, and material. Final evaluation of the cleaning agent should include testing of actual products and production processes. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for the Selection of Cleaning Agents for Oxygen Systems

ASTM G127-95(2000) 氧气装置用清洗剂的选择标准导则

The purpose of this guide is to provide information that may be considered when selecting and qualifying a cleaning agent for an oxygen system. Insufficient cleanliness can result in the ignition of contaminants or components by a variety of mechanisms. Therefore, an acceptable level of contamination for each condition of use in oxygen service should be defined. The acceptable level of contamination may depend on various factors, such as: 3.2.1 The nature and type of the contaminants, 3.2.2 The location and degree of contamination, 3.2.3 The type of substrate material, 3.2.4 The configuration and end use of the equipment or part to be cleaned, and 3.2.5 The operating parameters of the oxygen system (pressure, temperature, phase, concentration, fluid velocity, etc.).1.1 The purpose of this guide is to establish a procedure to select cleaning agents, both solvents and water-based detergents, for oxygen service. This includes of laboratory-scale tests for cleaning effectiveness, materials compatibility and oxygen compatibility. 1.2 The effectiveness of a particular cleaning agent depends upon the method by which it is used, the nature and type of the contaminants, and the characteristics of the article being cleaned, such as size, shape, and material. Final evaluation of the cleaning agent should include testing of actual products and production processes. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for the Selection of Cleaning Agents for Oxygen Systems

DLA A-A-1281 A-1989 (粒子)集油吸附剂

ASTM standards are available ?roin the AS'IM, 1916 Race Street,Philadelphia, PA 19103.

SORBENT, OIL (PARTICULATE)

DLA A-A-1282 A-1989 (内附)集油吸附剂

The General Services Administration has authorized the use of this Commercial Item Description ( CID ) i n preference to MIL-S-28600(YD) in part

SORBENT, OIL (ENCLOSED)

HG/T 3018-1988 氯化石蜡热稳定指数的测定

Chlorinated paraffins-Determination of thermal stability index

HG/T 3017-1988 氯化石蜡氯含量测定.汞量法

chlorinated paraffins-Determination of chlorine content-Mercurimetric method

IPC TR-579-1988 印刷线路板小直径镀通孔循环赛可靠性评价

The "Round Robin Reliability Evaluation of Small Diameter Plated ThroughH oles (PTH) in Printed Wiring Boards" had the following objectives:

Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

HG/T 2996-1987 纺织染整助剂的命名原则

Principle of nomenclature of textlle,dyeing and finishing auxiliaries

ISO 862:1984 表面活性剂 术语 三种语言版

Defines terms frequently used in this field. Gives, in particular, specific terms for textiles applications, dry cleaning, etc., but terms for other applications may be introduced. Annex A contains scientific terms directly related to surface phenomena and to the preparation of surface active agents and Annex B general terms non-specific to the field of surface active agents.

Surface active agents; Vocabulary Trilingual edition

WJ 255-1964 阿贝尔试验用碘化钾淀粉试纸制造与验收技术条件

Technical conditions for the manufacture and acceptance of potassium iodide starch test paper for Abel's test

JIS K 3410:1955 粉末乙黄原酸酯钠及粉末乙黄原酸钾

Powder sodium xanthate and powder potassium xanthate

EN 451-2-2017E 粉煤灰试验方法-第2部分:湿法测定细度的测定

This European Standard specifies the method for the determination of fly ash fineness by wet sieving on a 0,045 mm sieve (ISO 565). The European Standard specifies the reference procedure. If other methods are used it needs to be shown that they give results equivalent to those obtained by the reference method. In case of a dispute, only the reference method is used.

Method of testing f ly ash - Part 2: Determination of fineness by wet sieving

JIS K 3361:1979 化学纤维用高级醇类整理剂的试验方法

Method of testing for finishing agent of higher alcohols for synthetic fibers