G72 表面活性剂基础标准与通用方法 标准查询与下载



共找到 488 条与 表面活性剂基础标准与通用方法 相关的标准,共 33

Surface active agents - Deternimation of anionic surface active agents - Potentiometric two-phase titration method Corrigendum 1 to English version of DIN EN 14480:2004-11

ICS
71.100.40
CCS
G72
发布
2006-08
实施

This document specifies methods for the determination of the cloud point of solutions of non-ionic surface active agents obtained by the reaction of ethylene oxide with a hydrophobic base molecule. This document primarily applies to surfactants obtained by reaction of ethylene oxide with hydrophobic base molecules, such as fatty alcohols, fatty acids, long-chain alkylphenols, fatty amines, fatty acid esters of sugar derivatives among other ethoxylated non-ionic surfactants, which are by far the most commonly used. NOTE Other non-ionic surfactants containing other structural units, such as propylene oxide-ethylene oxide block copolymers, have distinctive behaviours that make the determination of the cloud point more difficult. This leads sometimes to a continuous turbidity over a temperature range of several degrees or even to the occurrence of two cloud points at significantly different temperatures.

Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide

ICS
71.100.40
CCS
G72
发布
2006-07-31
实施
2006-07-31

This European Standard specifies a method for the determination of the content of free N-(3-dimethylaminopropyl)- alkylamides (amidoamine) in alkylamidopropylbetaines, expressed in grams per 100 g of product. This method is applicable in the range between 0,02 g and 1,0 g of amidoamine per 100 g of product.

Surface active agents - Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines - Gas chromatographic method

ICS
CCS
G72
发布
2006-05-31
实施
2006-05-31

Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method.

ICS
71.100.40
CCS
G72
发布
2005-11-01
实施
2005-11-20

Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method.

ICS
71.100.40
CCS
G72
发布
2005-11-01
实施
2005-11-05

Surface active agents - Sodium dodecyl sulfate - Analysis method.

ICS
71.100.40
CCS
G72
发布
2005-11-01
实施
2005-11-05

This European Standard specifies a method for the determination of the content of free N-(3-dimethylaminopropyl)- alkylamides (amidoamine) in alkylamidopropylbetaines, expressed in grams per 100 g of product. This method is applicable in the range between 0,02 g and 1,0 g of amidoamine per 100 g of product.

Surface active agents - Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines - Gas chromatographic method; English version of DIN EN 14881

ICS
71.100.40
CCS
G72
发布
2005-11
实施

The European Standard specifies a method for the determination of the content of inorganic sulphate in anionic surface active agents. It can be applied to a-olefin sulphonates and n-olefin sulphonates, alcohol sulphates, alcohol ether sulphates, alkyl benzene sulphonates and other alkyl sulphonates. This method is used also for the determination of inorganic sulphate in alkyl benzene sulphonates or other alkyl sulphonates in their acid form. This method also applies to deep-coloured samples.

Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method; English version of DIN EN 14880

ICS
71.100.40
CCS
G72
发布
2005-11
实施

This European Standard specifies a method for the determination of the content of inorganic sulphate in anionic surface active agents. It can be applied to α-olefin sulphonates and n-olefin sulphonates, alcohol sulphates, alcohol ether sulphates, alkyl benzene sulphonates and other alkyl sulphonates. This method is used also for the determination of inorganic sulphate in alkyl benzene sulphonates or other alkyl sulphonates in their acid form. This method also applies to deep-coloured samples. NOTE Sulphate can be present as sulphuric acid, ionic salts of this acid or mixture of these.

Surface active agents - Determination of inorganic sulfate content in anionic surface active agents - Potentiometric lead selective electrode titration method

ICS
71.100.40
CCS
G72
发布
2005-09-26
实施
2005-09-26

This European Standard specifies a method for the determination of the content of anionic surface active agents and soaps in detergents and cleansers, defined as being the amount of anionic surface active agents expressed in millimoles per 100 g of product. NOTE 1 The applicability in products different that those tested should be checked in each particular case. NOTE 2 In comparison to usual laboratory two-phase titration with visual endpoint determination (see ISO 2271), potentiometric titration offers the advantage of automation; operator-dependent differences in recognising the equivalence point can be neglected, and a non-critical solvent replaces the toxicologically critical chloroform.

Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method

ICS
71.100.40
CCS
G72
发布
2005-09-05
实施
2005-09-05

This European Standard specifies a method for the determination of the content of quaternary ammonium surface active agents in raw materials and formulated products, defined as being the amount of quaternary ammonium surface active agents expressed in millimoles per 100 g of product. NOTE 1 The applicability in products different than those tested should be checked in each particular case. NOTE 2 In comparison to usual laboratory two-phase titration with visual endpoint determination (see ISO 2871-1 and ISO 2871-2) potentiometric titration offers the advantage of automation, operator-dependent differences in recognising the equivalence point can be neglected, and a non-critical solvent replaces the toxicologically critical chloroform.

Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method

ICS
71.100.40
CCS
G72
发布
2005-09-05
实施
2005-09-05

This European Standard specifies a method for the determination of the active content and molar mass of sodium dodecyl sulphate used as original titre for the titre determination of standard solutions for surface active agents titration. NOTE These are used in the mixed indicator two-phase titration (e. g. ISO 2271) and in the potentiometric titration using a surface active agent sensitive electrode (e.g. EN 14480).

Surface active agents - Sodium dodecyl sulfate - Analytical method

ICS
71.100.40
CCS
G72
发布
2005-09-05
实施
2005-09-05

Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005

ICS
71.100.40
CCS
G72
发布
2005-09
实施

Surface active agents - Sodium dodecyl sulfate - Analytical method; German version EN 14670:2005

ICS
71.100.40
CCS
G72
发布
2005-09
实施

This standard specifies a method for the determination of the content of anionic surface active agents and soaps in detergents and cleansers, defined as being the amount of anionic surface active agents expressed in millimoles per 100 g of product.#,,#

Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method; German version EN 14669:2005

ICS
71.100.40
CCS
G72
发布
2005-09
实施

This standard specifies a method for the determination of the content of quaternary ammonium surface active agents in raw materials and formulated products, defined as being the amount of quaternary ammonium surface active agents expressed in millimoles per 100 g of product.#,,#

Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005

ICS
71.100.40
CCS
G72
发布
2005-09
实施

This standard specifies a method for the determination of tetraacetyl ethylene diamine (TAED) content greater than or equal to 25g/100g in granules. The TAED granules are dissolved in acetonitrile, the internal standard is added to this solution and finally it is injected to a gas chromatograph. A flame ionisation detector is used for detection. The results are calculated from the peak areas taking into account the response factors that are determined previously.#,,#

Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method; German version EN 14666:2005

ICS
71.100.40
CCS
G72
发布
2005-09
实施

This European Standard specifies a method for the determination of physical stability of surface active agents in alkaline and acid solutions. It is applicable to all classes of surface active agents and also to other substances or mixtures such as polymers, complexing agents and formulations of surface active agents.

Surface active agents - Determination of physical stability in alkaline and acid solutions

ICS
71.100.40
CCS
G72
发布
2005-08-19
实施
2005-08-19

This European Standard specifies a method for the determination of tetraacetyl ethylene diamine (TAED) content greater than or equal to 25 g/100 g in granules.

Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method

ICS
71.100.40
CCS
G72
发布
2005-08-19
实施
2005-08-19

Surface active agents - Determination of physical stability in alkaline and acid solutions.

ICS
71.100.40
CCS
G72
发布
2005-08-01
实施
2005-08-20



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号