共找到 195 条与 水处理剂基础标准与通用方法 相关的标准,共 13 页
Determination of the chemical oxygen demand in industrial circulating cooling water—Permanganate index method
本标准规定了同类水处理剂抑制碳酸钙析出的阻垢性能的测定方法,即碳酸钙沉积法。 本标准适用于同类水处理剂抑制碳酸钙析出的阻垢性能的评定。
Determination of scale inhibition performance of water treatment chemicals—Calcium carbonate precipitation method
Reclaimed water quality—Determination of mercury—Mercury analyzer method
本标准规定了工业循环冷却水和锅炉用水中氯离子含量的测定方法。 本标准中摩尔法和电位滴定法适用于天然水、循环冷却水、软化水、锅炉炉水中氯离子含量的测定,摩尔法测定范围为3 mg/L~150 mg/L,超过150 mg/L时,可适当减少取样体积,稀释后测定;电位滴定法测定范围为5 mg/L~1 000 mg/L;共沉淀富集分光光度法适用于除盐水、锅炉给水中氯离子含量的测定,测定范围为10 μg/L~100 μg/L。
Determination of chloride in water for industrial circulating cooling system and boiler
本标准规定了液态水处理剂产品密度测定的通用方法。 本标准适用于液态水处理剂密度的测定。
Water treatment chemicals.General rules for determination of density
本标准规定了锅炉用水和冷却水中硬度的测定方法。 本标准适用于锅炉用水和冷却水硬度的测定。本标准中的铬黑T法测定范围为0.01 mmol/L~5 mmol/L,超过5 mmol/L时,可适当减少取样体积,稀释后测定;酸性铬蓝K法测定范围为1 μmol/L~100 μmol/L;电位滴定法测定范围为0.25 mmol/L~10 mmol/L(均以Ca、Mg为基本单元)。本标准也适用于天然水、冷却水、软化水及锅炉给水硬度的测定。
Analysis of water used in boiler and cooling system.Determination of hardness
本标准规定了锅炉用水和冷却水中电导率的测定方法。 本标准适用于锅炉用水、冷却水、除盐水中的电导率在0.055 μS/cm~10 μS/cm(25 ℃)的测定。本标准也适用于天然水及生活用水的电导率的测定。
Analysis of water used in boiler and cooling system.Determination of electrical conductivity
Determination of potassium and sodium in water for industrial circulating cooling system and boiler
Analysis of water used in boiler and cooling system—Determination of iron
Automatic continuous determination of water quality for boiler and cooling system—Potentiometric titration
Determination of sulfate in water for industrial circulating cooling system and boiler
本标准规定了水处理剂中砷和汞含量的测定方法原子荧光光谱法。 本标准适用于使用原子荧光光谱仪对水处理剂中的砷和汞含量进行检测。
Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry
本标准规定了循环冷却水中总有机碳(TOC)的测定方法:在线TOC仪测定法及仪器分析法。 本标准适用于循环冷却水中含量在0.1 mg/L~1 000 mg/L总有机碳的分析,也适用于地表水、地面水、回用水中总有机碳的测定。
Determination of total organic carbon (TOC) in industrial circulating cooling water
本标准规定了臭氧处理循环冷却水系统设计、处理后水质、检测方法、工程施工、运行维护管理、劳动安全与职业卫生的技术要求。 本标准适用于利用臭氧技术处理间冷开式循环冷却水系统的工程设计、施工、验收和运行的技术要求以及试验方法的技术依据。
Code for recirculating cooling water treatment by ozone
本标准规定了凝胶过滤色谱法(GFC)测定聚合物类水处理剂的分子量及其分布的方法和试验条件, 本标准适用于测定水处理剂中水溶性聚合物阻垢分散剂的相对平均分子量及分子量分布。本标准适用于测定分子量分布范围在100~30 000内的聚合物类水处理剂。 本标准不适用于与流动相、分离材料发生反应、吸收、吸附等相互作用的水溶性聚合物。
Water treatment chemicals.Determination of the molecular weight and molecular weight distribution of polymers.Gel filtration chromatography
本标准规定了敞开式间接循环冷却水系统节水技术要求”本标准适用于以地表水、地下水、海水淡化水和再生水等为补充水〉采用化学处理技术达到节水减排为目标的循环冷却水系统。
Technical specification for saving water of circulating cooling water
本标准规定了再生水中化学需氧量的测定方法。本标准适用于再生水中化学需氧量(COD)的测定,测定范围为5 mg/L~100 mg/L(以O计)。
Determination of chemical oxygen demand of reclaimed wastewater.Potassium dichromate method
本标准规定了测定锅炉用水和冷却水中化学耗氧量的方法--重铬酸钾快速法。本标准中的容量法适用于天然水、炉水、除盐水以及工业循环冷却水等水样中化学耗氧量的测定,测定范围为0 mg/L~50 mg/L(以氧计),浓度大于50 mg/L的水样应稀释后测定;本标准中的分光光度法适用于地表水、地下水、生活污水和工业废水等水样中化学耗氧量的测定,测定范围为50 mg/L~1 000 mg/L (以氧计),氯离子浓度不得大于1 000 mg/L,浓度大于1 000 mg/L或氯离子含量大于1 000 mg/L的水样应稀释后测定。
Analysis of water used in boiler and cooling system.Determination of chemical oxygen demand.Rapid method with potassium dichromate
本标准规定了工业循环冷却水中浊度的散射光测定方法。本标准适用于工业循环冷却水中浊度的测定,测定范围0 NTU~50 NTU。
Industrial circulating cooling water.Determination of turbidity.Diffused radiation method
本标准规定了用旋转挂片法测定水处理剂缓蚀性能的实验室方法。 本标准适用于水处理剂缓蚀性能的测定。
Determination of corrosion inhibition performance of water treatment agents.Rotation specimen method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号