G90 化工机械与设备综合 标准查询与下载



共找到 428 条与 化工机械与设备综合 相关的标准,共 29

This commercial item description(CID) covers portable, fuel-fired showers(4) contained in a shelter intended to provide hot showers to soldiers in the field for hygienic purposes.

BATH UNIT, PORTABLE, FOUR SHOWERHEADS

ICS
CCS
G90
发布
1997-01-10
实施

1.1 This practice shall apply to all fuel alcohol manufacturing facilities (FAMF) as defined in Terminology E 1705. This specification is primarily intended for, but not exclusively limited to fermentation ethanol processes. 1.2 This practice applies to both batch and continuous FAMF systems. Since a wide variety of equipment configurations can exist, this engineering practice will describe the necessary general requirements common to all FAMF facilities. 1.3 This practice is to be used in conjunction with applicable local, state, and Federal codes for designing, constructing, and operating FAMF facilities. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use . For hazard statement, see Section 11.

Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities

ICS
75.160.20
CCS
G90
发布
1997
实施

1.1 This practice shall apply to all fuel alcohol manufacturing facilities (FAMF) as defined in Terminology E 1705. This specification is primarily intended for, but not exclusively limited to fermentation ethanol processes. 1.2 This practice applies to both batch and continuous FAMF systems. Since a wide variety of equipment configurations can exist, this engineering practice will describe the necessary general requirements common to all FAMF facilities. 1.3 This practice is to be used in conjunction with applicable local, state, and Federal codes for designing, constructing, and operating FAMF facilities. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use . For hazard statement, see Section 11.

Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities

ICS
75.160.20 (Liquid fuels)
CCS
G90
发布
1997
实施

This commercial item description covers diamond marking pencils for inscribing glass surfaces

SCRIBER, DIAMOND POINT [Superseded: ARMY MIL-S-15825 A CANC NOTICE 3, ARMY MIL-S-15825 A VALID NOTICE 2, ARMY MIL-S-15825 A VALID NOTICE 1, ARMY MIL-S-15825 A (1), ARMY MIL-S-15825 A, ARMY MIL-S-15825 CANC NOTICE 1, ARMY MIL-S-15825]

ICS
CCS
G90
发布
1996-09-12
实施

This notice should be filed in front of MIL-A-851 16(AS), dated 25 November 1980.

ACTUATOR, PISTON, MINIATURE

ICS
CCS
G90
发布
1996-09-11
实施

This notice should be filed in front of MIL-T-8 1546A(AS), dated 18 February 197

TEST STAND, ACTUATOR, LINEAR LOAD

ICS
CCS
G90
发布
1996-09-11
实施

This notice should be filed in front of MS16062C(AS), dated 3 February 1964, and Notice 1, dated 2 September 1988.

INVERTER, 2500 VA, 3/1 PHASE, CLASS B

ICS
CCS
G90
发布
1996-09-11
实施

This notice should be filed in front of MS16057F, dated 30 November 1973, and Notice 1, dated 31 December 1987.

INVERTER 100/60 VA, 3/1 PHASE& 100 VA, 1 PHASE, CLASS B, MULTIPURPOSE

ICS
CCS
G90
发布
1996-09-04
实施

This notice should be filed in front of MIL-M-l5991D(AS), dated 14 February 1986, and Amendment 1, dated 15 August 1986.

MARKING MACHINE, HAND OPERATED

ICS
CCS
G90
发布
1996-08-21
实施

MIL-R-81355B(AS)is inactive for new design and is no longer used, except for replacement purposes.

RECORDER, BATHYTHERMOGRAPH DATA RO-308/SSQ-36

ICS
CCS
G90
发布
1996-08-21
实施

This commercial Item Description covers holders for countersinking cutters used on ferrous and non-ferrous materials.

HOLDER: COUNTERSINK, ADJUSTABLE MICROMETER STOP

ICS
CCS
G90
发布
1996-08-02
实施

This commercial item description (cid) covers aluminum and corrosion-resisting steel colanders.

COLANDER

ICS
CCS
G90
发布
1996-07-25
实施

This notice should be filed in front of MIL-B-50451B(AR), dated 1 July 1976

BLASTING MACHINE, M32 PARTS AND ASSEMBLY

ICS
CCS
G90
发布
1996-07-15
实施

This notice should be filed in front of MIL-T-50009A(AR), dated 18 August 1960

THICKENER, INCENDIARY OIL, M4

ICS
CCS
G90
发布
1996-06-05
实施

本标准规定了奥氏体不锈钢及复层为奥氏体不锈钢制压力容器及零部件的制造单位在制造管理中所必须遵守的基本要求。 本标准适用于制造不锈钢压力容器及不锈钢压力容器零部件的单位。 不透钢压力容器的制造除应符合相应产品标准和劳动部颁发的《锅炉压力容器安全监察暂行条例》及实施细则《压力容器安全技术监察规程》、《液化气体汽车罐车安全监察规程》、《液化气体铁路罐车安全监察规程》及经规定程序批准的产品图样、技术文件外,还应符合本标准的规定。 非奥氏体或衬里为不锈钢压力容器及常压不锈钢容器的制造亦可参照采用本标准。

Rules for the Manufacture of Austenitic Stainless Steel Pressure Vessels

ICS
71.120
CCS
G90
发布
1996-05-26
实施
1997-03-01

This commercial item description covers flexible abrasive commutator burnishing stones of the aluminum oxide type having a resilient bond.

STONE, COMMUTATOR BURNISHING (FLEXIBLE ABRASIVE)

ICS
CCS
G90
发布
1996-04-05
实施

This commercial item description covers brown kraft paper used for general wrapping applications.

AMPLIFIER - POWER SUPPLY GROUP OA-3633( )GRC

ICS
CCS
G90
发布
1996-03-29
实施

This notice should be filed in front of MIL-H-46906D(AR) dated 23 November 1973 MIL-H-46906D dated 23 November 1973 with Reinstatement Notice 2, dated 27 January 1984 and Validation Notice 3, dated 15 October 1990 is inactive for new design and is no longer used, except for replacement purposes.

HOLDER, INCREMENT M1A1, M2A1 AND M3 PARTS FOR

ICS
CCS
G90
发布
1996-02-06
实施

This commercial item description covers brown kraft paper used for general wrapping applications.

RECEIVERS, LIQUID REFRIGERANT 12

ICS
CCS
G90
发布
1996-02-02
实施

This notice should be filed in front of MIL-I-12659A(AR) dated 24 June 1954

INVERTER, 350 VOLT-AMPERE

ICS
CCS
G90
发布
1996-01-29
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号