G98 化工专用仪器仪表 标准查询与下载
共找到 177 条与 化工专用仪器仪表 相关的标准，共 12 页
本规范适用于化工装置仪表及管线的伴热和绝热设计，包括应用范围、使用要求、材质选择、配管方式。 本规范规定了仪表及管线伴热和绝热的方式、伴热和绝热系统的设计、绝热层和保护层材料的选用、保温箱选型。
Design code for tracing and insulation of instrument and impulse line
- ICS
- 71.120
- CCS
- G98
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本规范适用于化工装置测量和控制仪表的隔离和吹洗设计。
Design code for instrument seal and purge
- ICS
- 71.120
- CCS
- G98
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了氨气检测报警仪的性能要求、检验方法。本标准适用于便携式、移动式、固定式氨气检测报警仪的质量评价、检验与选型。
Technical specifications for ammonia detection instruments
- ICS
- 13.340
- CCS
- G98
- 发布
- 2013-06-08
- 实施
- 2013-10-01
Chemical apparatus - Documentation in the life cycle of process plants - Part 1: Registration of the essential and supplementary documentation, Corrigendum to DIN 28000-1:2011-01
- ICS
- 01.110;71.120.01
- CCS
- G98
- 发布
- 2012-10
- 实施
General technical requirements for instrumentation power supply system of chemical plant
- ICS
- CCS
- G98
- 发布
- 2012-07-01
- 实施
- 2012-07-01
Intelligent double cup flash point tester
- ICS
- CCS
- G98
- 发布
- 2012-07-01
- 实施
- 2012-07-01
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a silicone rubber in the form of a two-component liquid compound. Primarily for potting or encasement of electrical and electronic components with an elastomeric medium or for production of mechanical rubber parts in low-pressure tooling. Elastomeric properties are retained in operation from -55 to +230 degrees C (-67 to +446 degrees F). For mechanical applications, where compression set resistance is important, elevated temperature post-curing of parts may be required.
Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30-45
- ICS
- 49.025.40
- CCS
- G98
- 发布
- 2012-01-17
- 实施
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a silicone rubber in the form of a two-component liquid compound. Primarily for potting or encasement of electrical and electronic components with an elastomeric medium or for production of mechanical rubber parts in low-pressure tooling. Elastomeric properties are retained in operation from -55 to +230 degrees C (-67 to +446 degrees F). For mechanical applications where compression set resistance is important, elevated temperature post-curing of parts may be required.
Silicone Rubber Compound Room Temperature Vulcanizing, 15,000 Centipoise Viscosity Durometer 35-55
- ICS
- 49.025.40
- CCS
- G98
- 发布
- 2012-01-17
- 实施
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of February 22, 1989. It is recommended, therefore, that this specification not be specified for new designs.
Silicone Rubber Compound, Room Temperature Vulcanizing, 55,000 Centipoise Viscosity, Durometer 55-70
- ICS
- 49.025.40
- CCS
- G98
- 发布
- 2012-01-17
- 实施
本标准规定了胶辊赵氏（P. J）硬度计的原理及产品结构、要求、试验、检验规则、标志、包装、运输及贮存等内容。 本标准适用于测定硫化胶辊表观硬度的胶辊赵氏（P. J）硬度计(以下简称硬度计)。
Technical specifications for rubber-covered rollers Pusey and Jones hardness tester
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了橡胶氧压老化箱的结构、仪器主要参数、要求、试验方法、检验规则及标志、包装、运输和贮存要求。 本标准适用于硫化橡胶、橡胶或塑料涂覆织物试验用的橡胶氧压老化箱(以下简称老化箱)。
Technical specifications for rubber oxygen pressure aging chamber
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了以液体为传热介质的橡胶脆性温度试验机（以下简称试验机）的结构与尺寸、要求、试验方法、检验规则和标志、包装、运输及贮存等。 本标准适用于测定多个硫化橡胶试样的脆性温度的试验机。
Technical specifications for rubber low-tempreature impact testers
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了普通V带和窄V带测长机(以下简称测长机)的基本结构、要求、试验、检验规则及标志、包装、运输、贮存等。 本标准适用于测量普通V带和窄V带的长度和露出高度的普通V带和窄V带测长机。
Technical specifications for common V belt and narrow V belt measuring machine
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了落球回弹测定仪的工作原理和主要结构、要求、试验方法、检验规则、标志、包装、运输和储存等。 本标准适用于测定高聚物多孔弹性材料，也适用于测定硫化橡胶回弹性能（落球回弹率）的落球回弹测定仪(以下简称测定仪)。
Technical specifications for drop ball rebound tester
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了橡塑90°屈挠试验机（以下简称试验机）的结构与基本参数、要求、试验、检验规则、标志、包装、运输及贮存等。 本标准适用于测定橡胶、塑料、热塑性弹性体在90°屈挠时割口增长量的屈挠试验机。
Technical specifications for rubber and plastics 90°flex testing machine
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了橡胶或塑料涂覆织物屈挠磨损试验机的结构与主要参数、要求、试验、检验规则和标志、包装、运输及贮存等各项要求。 本标准适用于橡胶或塑料涂覆织物屈挠磨损试验机(以下简称试验机)。
Technical specifications for rubber and plastic coated flex fabric wear testing machine
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了橡胶专用裁刀的结构尺寸、要求、试验、检验规则、包装和贮存。 本标准适用于裁切哑铃型、直角型、新月型的硫化橡胶试样的裁刀。
Technical specifications for rubber dies
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了橡胶疲劳试验机的主要结构、要求、试验方法、检验规则、标志和包装。 本标准适用于测试橡胶屈挠龟裂、伸张疲劳等疲劳特性的疲劳试验机(以下简称试验机)。其他类橡胶材料的疲劳试验机也可参照采用本标准。
Technical specifications for rubber fatigue testing machines
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了切割圆柱体橡胶试样切片机的结构、要求、试验、检验规则、标志和包装等。 本标准适用于裁切直径16mm,高度为10mm的圆柱体橡胶的可塑性试验切片机(以下简称切片机)。
Technical specifications for rubber plasticity test cutting machine
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了橡胶平行板塑性计的主要结构、要求、试验方法、检验规则、仪器成套性和标志和包装。 本标准适用于平行板塑性计。
Technical specifications for rubber parallel-plate plastometers
- ICS
- 71.120;83.200
- CCS
- G98
- 发布
- 2011-12-20
- 实施
- 2012-07-01
